Journals / Konya Journal of Engineering Sciences / 2014 / Volume: 2 Issue: 2

Cage Levelling Control of Truck-Mounted Hydraulic Aerial Work Platforms

ARAÇÜSTÜ HİDROLİK İŞ PLATFORMLARININ SEPET DENGELEME KONTROLÜ

Mehmet Sezer(SELÇUK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ)
Mete Kalyoncu(SELÇUK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ)
Pages
9–18
Publication Date
2014-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Computer simulations were made to evaluate the developed control system performance.Computer simulations were derived by using MATLAB/Simulink software.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, cage levelling control of truck-mounted hydraulic aerial work platforms ineach case the platform has been studied in ensuring that parallel to the horizontal.
📊
Key Findings & Data:The mathematicalmodel belonging to the system was derived by making realistic model which can represent truckmounted hydraulic aerial work platforms.
💡
Conclusion & Impact:Computer simulations were made to evaluate the developed control system performance.Computer simulations were derived by using MATLAB/Simulink software.
🔬Design:Lab & Field Experiment
📍Scope:Comprehensive Sample
⚙️Variables:Mobil hidrolik platform · İnsan platformu · Matematiksel model

Abstract

In this study, cage levelling control of truck-mounted hydraulic aerial work platforms ineach case the platform has been studied in ensuring that parallel to the horizontal. The mathematicalmodel belonging to the system was derived by making realistic model which can represent truckmounted hydraulic aerial work platforms. With developed controller, cage’s active control was suppliedfor standing parallel to horizontal. Developed controller is based on PID (proportional, integral andderivative). Computer simulations were made to evaluate the developed control system performance.Computer simulations were derived by using MATLAB/Simulink software.

Özet

Bu çalışmada mobil hidrolik insan platformunun sepet uzvunun her durumunda yatayla paralel olmasının sağlanması konusunda çalışılmıştır. Mobil hidrolik insan platformunu temsil edebilecek gerçekçi modeli oluşturularak, sistemin matematiksel modeli oluşturulmuştur. Geliştirilen kontrolcü ile sistemdeki sepeti uzvunun yatayla paralel olarak durmasının aktif kontrolü sağlanmıştır. Geliştirilen kontrolcü PID (Oransal, Türevsel ve İntegral) tabanlıdır. Geliştirilen kontrol sisteminin performansının değerlendirilmesi amacıyla bilgisayar simülasyonları yapılmıştır. Bilgisayar simülasyonları MATLAB/Simulink yazılımı ile yapılmıştır.

🔖

Cite This Article

Sezer, M., Kalyoncu, M. (2014). Cage Levelling Control of Truck-Mounted Hydraulic Aerial Work Platforms. Konya Journal of Engineering Sciences, Volume: 2 Issue: 2, 9–18. https://ajindex.com/articles/1381224

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Hu H., Li E., Zhao X., Liang Z. and Yu W.,“ Modeling and Simulation of Folding-Boom Aerial Platform Vehicle Based on the Flexible Multi-body Dynamics”, International Conference on Intelligent Control and Information Processing, Dalian, China, 798-802, 13-15 August 2010.
  2. The History of the Cherry Picker Construction Equipment, http://www.elcaminorental.com/blog/the-history-of-the-cherry-picker-construction-equipment/, ziyaret tarihi: 31 Mayıs 2014.
  3. Ming Ge, En Li, Zize Liang, Min Tan “Design of a Hydraulic-Cylinder-Pressure-based Anti-overturning Module for Aerial Work Platforms”, 2011 Fourth International Conference on Intelligent Computation Technology and Automation
  4. Yuan Q., Lew J., Piyabongkarn D.,“ Motion Control of an Aerial Work Platform”, 2009 American Control Conference Hyatt Regency Riverfront, St. Louis, MO, USA, 10-12 June 2009.
  5. Hootsmans N.A.M., Dubowsky S., MO P.Z., “The Experimental Performance of a Mobile Manipulator Control Algorithm”, Proceeding of the 1992 IEEE Internatonal Conference on Robotics and Automation Nice, France, Cambridge, MA 02139 USA, 1948-1954, May 1992
  6. Murray, R.M., Li, Z., Sastry, S. S., 1994, “A planar Example”, A Mathematical Introduction to Robotic Manipulation, CRS Press, 97-99
  7. Hu H., Li E., Zhao X., Liang Z. and Yu W.,“ Modeling and Simulation of Folding-Boom Aerial Platform Vehicle Based on the Flexible Multi-body Dynamics”, International Conference on Intelligent Control and Information Processing, Dalian, China, 798-802, 13-15 August 2010.
  8. Murray, R.M., Li, Z., Sastry, S. S., 1994, “A planar Example”, A Mathematical Introduction to Robotic Manipulation, CRS Press, 97-99