SavedAdd your journal

Journals / Balkan Journal of Electrical and Computer Engineering / 2020 / Cilt: 8 Sayı: 4

Design and Implementation of A Test Device for Determining the Capacity of Industrial Battery Banks

Zeki Zürey(KARAMANOĞLU MEHMETBEY ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ)0000-0003-4219-1274
Kadir Sabancı(KARAMANOĞLU MEHMETBEY ÜNİVERSİTESİ)0000-0003-0238-9606
Selami Balcı(Karamanoğlu Mehmetbey Üniversitesi)0000-0002-3922-4824
Pages
348–354
Publication Date
2020-10-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, battery banks can be divided into small groups and their measurements can be made so that broken cells can be detected.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a test device is developed to measure the capacities and performances of high capacity battery banks and to detect broken cells.
📊
Key Findings & Data:Through this test device, the instant capacity of the battery banks is measured.
💡
Conclusion & Impact:In addition, battery banks can be divided into small groups and their measurements can be made so that broken cells can be detected.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Battery capacity test device · industrial battery banks · buck converter

Abstract

In this study, a test device is developed to measure the capacities and performances of high capacity battery banks and to detect broken cells. Through this test device, the instant capacity of the battery banks is measured. Based on the data obtained, both quantitative information about the health of the battery bank is provided and it is determined whether the battery bank will meet the need according to its intended use. In addition, battery banks can be divided into small groups and their measurements can be made so that broken cells can be detected.

🔖

Cite This Article

Zürey, Z., Sabancı, K., Balcı, S. (2020). Design and Implementation of A Test Device for Determining the Capacity of Industrial Battery Banks. Balkan Journal of Electrical and Computer Engineering, Cilt: 8 Sayı: 4, 348–354. https://doi.org/10.17694/bajece.689724

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (26)

  1. I. Sefa, S. Balci, N. Altin, and S. Ozdemir, Comprehensive analysis of inductors for an interleaved buck converter. 2012, pp. DS2b.5-1
  2. T. Blank, J. Badeda, J. Kowal, and D. Sauer, Deep discharge behavior of lead-acid batteries and modeling of stationary battery energy storage systems. 2012
  3. E. Oguz, H. Çimen, and Y. Oğuz, "Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage," Balkan Journal of Electrical and Computer Engineering, pp. 40-49, 09/01 2017, doi: 10.17694/bajece.334348
  4. N. Altin, S. Balci, S. Ozdemir, and I. Sefa, "A comparison of single and three phase DC/DC converter structures for battery charging," in 2013 International Conference on Renewable Energy Research and Applications (ICRERA), 20-23 Oct. 2013 2013, pp. 1228-1233, doi: 10.1109/ICRERA.2013.6749939
  5. M. Kiel, D.-U. Sauer, P. Turpin, M. Naveed, and E. Favre, "Validation of single frequency Z measurement for standby battery state of health determination," INTELEC 2008 - 2008 IEEE 30th International Telecommunications Energy Conference, pp. 1-7, 2008
  6. H. K. Scholl, "Automatic battery tester with recording means for battery performance," ed: Google Patents, 1971
  7. N. C. Berglund, T. J. Rosedahl, and S. W. Steele, "Battery capacity test and electronic system utilizing same," ed: Google Patents, 1997
  8. K. I. Bertness, "Method and apparatus for auditing a battery test," ed: Google Patents, 2000
  9. G. D. Brink and D. L. Burton, "Battery capacity test method and apparatus," ed: Google Patents, 2000
  10. A. H. Anbuky and P. E. Pascoe, "Battery capacity measurement," ed: Google Patents, 2005
  11. M. Coleman, W. G. Hurley, and C. K. Lee, "An Improved Battery Characterization Method Using a Two-Pulse Load Test," IEEE Transactions on Energy Conversion, vol. 23, no. 2, pp. 708-713, 2008, doi: 10.1109/TEC.2007.914329
  12. M. B. Bayram, I. Sefa, and S. Balci, "A static exciter with interleaved buck converter for synchronous generators," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17760-17770, 2017/07/13/ 2017, doi:
  13. S. Ozdemir, S. Balci, N. Altin, and I. Sefa, "Design and performance analysis of the three-level isolated DC-DC converter with the nanocyrstalline core transformer," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17801-17812, 2017/07/13/ 2017, doi:
  14. F. Asadi and K. Eguchi, "On the extraction of input and output impedance of PWM DC-DC converters," Balkan Journal of Electrical and Computer Engineering, vol. 7, 04/30 2019, doi: 10.17694/bajece.468787
  15. R. Bououd and S. Lassaad, An overview of chopper topologies. 2017, pp. 1-7
  16. SANREX. "SQD300AA100 Transistor Module." https://www.digchip.com/datasheets/download_datasheet.php?id=919058&part-number=SQD300AA100 (accessed 2019)
  17. Altium. "Altium Designer." https://www.altium.com/altium-designer/ (accessed 2020)
  18. Microchip. "Microchip." https://www.microchip.com/ (accessed 2020)
  19. Microchip. "PIC18F46K22 Microcontroller." https://www.microchip.com/wwwproducts/en/PIC18F46K22#additional-features (accessed 2020)
  20. Nextion. "Home - Nextion." https://nextion.tech/ (accessed 2020)
  21. Nextion. "NX8048k070 - Nextion." https://nextion.tech/datasheets/nx8048k070/ (accessed 2020)
  22. Nextion. "Nextion Editor." https://nextion.tech/nextion-editor/#section1 (accessed 2020)
  23. Electropaedia. "Battery Testing." https://www.mpoweruk.com/testing.htm (accessed 2019)
  24. Electropaedia. "State of Charge (SOC) Determination." https://www.mpoweruk.com/soc.htm (accessed 2019)
  25. Electropaedia. "State of Health (SOH) Determination." https://www.mpoweruk.com/soh.htm (accessed 2019)
  26. M. Team, "A guide to understanding battery specifications," 2008.