SavedAdd your journal

Journals / Avrupa Bilim ve Teknoloji Dergisi / 2020 / Sayı: 20

Investigation of Earthquake Behavior of Reinforced-Concrete Buildings Built on Soil Slope

Eğimli Zeminlerde İnşa Edilen Betonarme Binaların Deprem Davranışlarının İncelenmesi

Ercan Işık(BİTLİS EREN ÜNİVERSİTESİ, MÜHENDİSLİK-MİMARLIK FAKÜLTESİ)0000-0001-8057-065X
İbrahim Baran Karasin(DICLE UNIVERSITY)0000-0001-5990-1215
Ali Emre Ulu(Bitlis Eren Üniversitesi)0000-0001-7499-3891
Pages
162–170
Publication Date
2020-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The displacement demands decreased in building models, where the soil slope of the soil increased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The soils on which the structures will be built can be sloping.
📊
Key Findings & Data:The vertical structural elements on the ground story can be built with different heights according to the soil slope. 3%, 5% and 10% soil slopes were taken into account in this study.
💡
Conclusion & Impact:The displacement demands decreased in building models, where the soil slope of the soil increased.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Betonarme · Statik itme analizi · Kısa kolon

Abstract

The soils on which the structures will be built can be sloping. The soil slope was mostly eliminated; therefore, different levels on foundations were prevented. , the ground slope is eliminated and foundations sitting at different levels are prevented. But in some cases the structure can be built according to the soil slope. The vertical structural elements on the ground story can be built with different heights according to the soil slope. 3%, 5% and 10% soil slopes were taken into account in this study. Structural analysis was performed for the reference reinforced-concrete building model without soil slope in order to compare the results. Static pushover and eigen value analyzes were carried out for four different building models. Ground story columns heights were chosen as one variable according to the soil slope in all structural models. All other values that are the basis of structural analysis are taken as constant. The periods, base shear force, elastic and effective rigidity, target displacements for three different damage status was calculated separately for all structural models. Additionally, the initial and last damage status was obtained for all structural models. . Short columns formed due to the soil slope negatively affect the earthquake behavior of the building. Due to the increase of the soil slope, the decrease in column heights on the ground story increases the stiffness values, decreases the period values and increases the seismic demands of the structural models. However, in structural models with high soil slope, initial damages occurred under lower load factors. The initial damages occurred in columns with the lowest heights due to the soil slope. The displacement demands decreased in building models, where the soil slope of the soil increased.

Özet

Yapıların inşa edileceği zeminler eğimli olabilmektedir. Çoğu zaman tabii zemin eğimi ortadan kaldırılarak farklı kot seviyelerine oturan temeller engellenmektedir. Ancak bazı durumlarda yapı zemin eğimine göre inşa edilebilmektedir. Bu gibi durumlarda yapının zemin katında bulunan düşey taşıyıcı elemanlar farklı yüksekliklerde inşa edilebilmektedir. Bu çalışma kapsamında 3%, 5% ve 10% zemin eğimleri dikkate alınmıştır. Elde edilen sonuçların karşılaştırılabilmesi adına zemin eğimin dikkate alınmadığı referans betonarme bina için hesaplamalar yapılmıştır. Oluşturulan dört farklı yapı modeli için statik itme ve özdeğer analizleri yapılmıştır. Yapısal modellerin tamamında değişken olarak sadece zemin kat kolon yükseklikleri seçilmiştir. Yapısal analizlere esas olan diğer tüm değerler sabit olarak alınmıştır. Her bir yapısal model için periyot, yer değiştirme, taban kesme kuvvet, elastik ve efektif rijitlik ile hasar durumları için üç farklı hedef deplasman değerleri ayrı ayrı hesaplanmıştır. Her bir yapı modeli için ilk ve son hasar şekilleri elde edilmiştir. Zemin eğiminden dolayı oluşan kısa kolonlar yapının deprem performansını olumsuz olarak etkilemektedir. Zemin eğiminin artmasından dolayı zemin katta yer alan kolon yüksekliklerindeki azalma yapının rijitlik değerlerini arttırmakta, periyot değerlerini azaltıp, yapının sismik kapasitesini arttırmaktadır. Ancak zemin eğiminin fazla olduğu yapı modellerinde daha düşük yük faktörleri altında ilk hasarlar meydana gelmiştir. Oluşan ilk hasarlar eğimden dolayı en düşük yüksekliklere sahip kolonlarda oluşmuştur. Yer değiştirme istem talepleri zemin eğiminin arttığı yapı modellerinde azalmıştır.

🔖

Cite This Article

Işık, E., Karasin, İ. B., Ulu, A. E. (2020). Investigation of Earthquake Behavior of Reinforced-Concrete Buildings Built on Soil Slope. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 20, 162–170. https://doi.org/10.31590/ejosat.757763

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (42)

  1. Ademovic, N., Hrasnica, M., & Oliveira, D.V. (2013). Pushover analysis and failure pattern of a typical masonry residential building in Bosnia and Herzegovina. Engineering Structures, 50, 13- 29. https://doi.org/10.1016/j.engstruct.2012.11.031
  2. Ademović, N., & Hrasnica, M. (2015). Capacity degradation and crack pattern development in a multi-storey unreinforced masonry building. Građevinar, 67(04), 351-361. https://doi.org/10.14256/JCE.1191.2014
  3. Antoniou, S., & Pinho, R. (2003). Seismostruct – Seismic Analysis program by Seismosoft. Technical manual and user manual.
  4. Aksoylu, C., & Arslan, M. H. (2019). Çerçeve+perde türü betonarme binaların periyod hesaplarının TBDY-2019 yönetmeliğine göre ampirik olarak değerlendirilmesi. Uludağ University Journal of The Faculty of Engineering, 24(3), 365-382. https://doi.org/10.17482/uumfd.603437
  5. Arslan, M. H. (2010). An evaluation of effective design parameters on earthquake performance of RC buildings using neural networks. Engineering Structures, 32(7), 1888-1898. https://doi.org/10.1016/j.engstruct.2010.03.010
  6. Arslan, M. H., Köroğlu, M. A., & Köken, A. (2008). Binaların yapısal performansının statik itme analizi ile belirlenmesi. Yapı Teknolojileri Elektronik Dergisi, 4(2), 71-84.
  7. Bal, İ.E., Tezcan, S. S., & Gülay, F.G. (2007). Betonarme binaların göçme riskinin belirlenmesi için P25 hızlı değerlendirme yöntemi. Altıncı Ulusal Deprem Mühendisliği Konferansı, 16-20 Ekim 2007, İstanbul.
  8. Chopra, A. K., & Goel, R. K. (2002). A modal pushover analysis procedure for estimating seismic demands for buildings. Earthquake Engineering & Structural Dynamics, 31(3), 561-582. https://doi.org/10.1002/eqe.144
  9. Caglar, N., Demir, A., Ozturk, H., & Akkaya, A. (2015). A simple formulation for effective flexural stiffness of circular reinforced concrete columns. Engineering Applications of Artificial Intelligence, 38, 79-87. https://doi.org/10.1016/j.engappai.2014.10.011
  10. Estêvão, J. M., & Oliveira, C. S. (2015). A new analysis method for structural failure evaluation. Engineering Failure Analysis, 56, 573-584. https://doi.org/10.1016/j.engfailanal.2014.08.009
  11. Ghosh, R., & Debbarma, R. (2017). Performance evaluation of setback buildings with open ground storey on plain and sloping ground under earthquake loadings and mitigation of failure. International Journal of Advanced Structural Engineering, 9(2), 97. https://doi.org/10.1007/s40091-017-0151-3
  12. Hadzima-Nyarko, M., & Kalman Sipos, T. (2017). Insights from existing earthquake loss assessment research in Croatia. Earthquakes and Structures, 13(4), 365-375. https://doi.org/10.12989/eas.2017.13.4.401
  13. Hsiao, F. P., Oktavianus, Y., & Ou, Y. C. (2015). A pushover seismic analysis method for asymmetric and tall buildings. Journal of the Chinese Institute of Engineers, 38(8), 991-1001.https://doi.org/10.1080/02533839.2015.1056553
  14. Işık, E., Özdemir, M., Karaşin, İ.B., Karaşin, A., (2019). Betonarme yapılarda kullanılan malzeme modellerinin karşılaştırılması. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 8(3), 968-984. https://doi.org/10.17798/bitlisfen.520354
  15. Işık, E., Özdemir, M., & Karaşin, İ. B. (2018). Performance analysis of steel structures with A3 irregularities. International Journal of Steel Structures, 18(3), 1083-1094. https://doi.org/10.1007/s13296-018-0046-6
  16. Işık, E., & Özdemir, M. (2017). Performance based assessment of steel frame structures by different material models. International Journal of Steel Structures, 17(3), 1021-1031. https://doi.org/10.1007/s13296-017-9013-x
  17. Isik, E., Isik, M. F., & Bulbul, M. A. (2017). Web based evaluation of earthquake damages for reinforced concrete buildings. Earthquakes and Structures, 13(4), 387-396. https://doi.org/10.12989/eas.2017.13.4.423
  18. Işık, E., & Kutanis M., (2015). Performance based assessment for existing residential buildings in Lake Van basin and seismicity of the region. Earthquakes and Structures, 9(4), 893-910. https://doi.org/10.12989/eas.2015.9.4.893
  19. Işık, E. (2016). Consistency of the rapid assessment method for reinforced concrete buildings. Earthquakes and Structures, 11(5), 873-885. https://doi.org/10.12989/eas.2016.11.5.873
  20. Işık, E. (2013). The evaluation of existing buildings Bitlis province using a visual screening method, SDU, Journal of Natural and Applied Sciences, 17(1), 173-178.
  21. Karaşin, İ. B., Işık, E., Karaşin, A., & Özdemir, M., (2017). Betonarme Yapılarda Tepe-Yamaç Etkisinin Yapı Performansına Etkisi. International Conference on Multidisciplinary, Science, Engineering and Technology (IMESET’17), Bitlis, Türkiye.
  22. Khadiranaikar, R. B., & Masali, A. (2014). Seismic performance of buildings resting on sloping ground–a review. IOSR J Mech Civ Eng (IOSR-JMCE), 11(3), 12-19. https://doi.org/10.9790/1684-11331219
  23. Kutanis, M., Boru, E. O., & Işık, E. (2017). Alternative instrumentation schemes for the structural identification of the reinforced concrete field test structure by ambient vibration measurements. KSCE Journal of Civil Engineering, 21(5), 1793-1801. https://doi.org/10.1007/s12205-016-0758-0
  24. Mander, J. B., Priestley, M. J. N., & Park, R., (1998). Theoretical stress-strain model for confined concrete. Journal of Structural Engineerings, 114(8), 1804–1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  25. Menegotto, M., & Pinto, P. E., (1973). Method of analysis for cyclically loaded rc. plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. symposium on the resistance and ultimate deformability of structures acted on by well defined repeated loads, in International Association for Bridge and Structural Engineering, Zurich, Switzerland, 15–22.
  26. Mohammad, Z., Baqi, A., & Arif, M. (2017). Seismic response of RC framed buildings resting on hill slopes. Procedia Engineering, 173, 1792-1799. https://doi.org/10.1016/j.proeng.2016.12.221
  27. Nikoo, M., Hadzima-Nyarko, M., Khademi, F., & Mohasseb, S. (2017). Estimation of fundamental period of reinforced concrete shear wall buildings using self organization feature map. Structural Engineering and Mechanics, 63(2), 237-249. https://doi.org/10.12989/sem.2017.63.2.237
  28. Ordu, E., & Özkan, M. T. (2006). Three-dimensional finite element analysis of the seismic behavior of pile foundations. İtü Dergisi/d, 5(2), 27-34.
  29. Ozcebe, G., Yucemen, M. S., Aydogan, V., & Yakut, A. (2003). Preliminary seismic vulnerability assessment of existing reinforced concrete buildings in Turkey. In Seismic Assessment and Rehabilitation of Existing Buildings (pp. 29-42). Springer, Dordrecht.
  30. Öztürk, H., Demir, A., Dok, G., & Güç, H. (2017). Betonarme kolonlarin etkin kesit rijitlikleri üzerine yönetmeliklerin yaklaşimlari. 4. Uluslararası Deprem Mühendisliği ve Sismoloji Konferansı 11-13 Ekim 2017, Eskişehir.
  31. Pinto, P. E. (2005). The Eurocode 8-Part 3: the new European Code for the seismic assessment of existing structures.
  32. Shakib, H., & Pirizadeh, M. (2013). Probabilistic seismic performance assessment of setback buildings under bidirectional excitation. Journal of Structural Engineering, 140(2), 04013061.https://doi.org/10.1061/(ASCE)ST.1943-541X.0000835
  33. SeismoStruct v6.5 (2013). A computer program for static and dynamic nonlinear analysis of framed structures. Seismosoft.
  34. Šipoš, T. K., & Hadzima-Nyarko, M. (2017). Rapid seismic risk assessment. International Journal of Disaster Risk Reduction, 24, 348-360. https://doi.org/10.1016/j.ijdrr.2017.06.025
  35. Sreerama, A. K., & Ramancharla, P. K. (2013, October). Earthquake behavior of reinforced concrete framed buildings on hill slopes. In International Symposium on New Technologies for Urban Safety of Mega Cities in Asia (USMCA 2013).
  36. Sucuoğlu, H., Yazgan, U., & Yakut, A. (2007). A screening procedure for seismic risk assessment in urban building stocks. Earthquake Spectra, 23(2), 441-458. https://doi.org/10.1193/1.2720931
  37. Tekeli, H., Dilmac, H., Demir, F., Gencoglu, M., & Guler, K. (2017). Shear stress indicator to predict seismic performance of residential RC buildings. Computer and Concrete, 19(3), 283-291.https://doi.org/10.12989/cac.2017.19.3.283
  38. Tezcan, S. S., Bal, I. E., & Gulay, F. G. (2011). P25 scoring method for the collapse vulnerability assessment of R/C buildings. Journal of the Chinese Institute of Engineers, 34(6), 769-781.https://doi.org/10.1080/02533839.2011.591548
  39. Ulutaş, H., Dilmac, H., Tekeli, H., & Demir, F. (2019). Okul binalarında bulunması gereken perde duvar oranı üzerine bir çalışma. Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(1), 1-10. https://doi.org/10.29048/makufebed.500974
  40. Yakut, A., Erberik, M. A., Ilki, A., Sucuoğlu, H., & Akkar, S. (2014). Rapid seismic assessment procedures for the Turkish building stock. In Seismic Evaluation and Rehabilitation of Structures (pp. 15-35). Springer, Cham.
  41. Yakut, A. (2004). Preliminary seismic performance assessment procedure for existing RC buildings. Engineering Structures, 26(10), 1447-1461. https://doi.org/10.1016/j.engstruct.2004.05.011
  42. Xian, L., He, Z., & Ou, X. (2016). Incorporation of collapse safety margin into direct earthquake loss estimate. Earthquakes and Structures, 10(2), 429-450. https://doi.org/10.12989/eas.2016.10.2.429