SavedAdd your journal

Journals / Avrupa Bilim ve Teknoloji Dergisi / 2026 / Sayı: 21

The Effect of Boron Additives on Corrosive Wear Resistance of 8620 Steels

8620 Kalite Çeliklerin Korozif Aşınma Direncine Bor İlavesinin Etkisi

Engin Çevik(KARABUK UNIVERSITY, INSTITUTE OF IRON AND STEEL)0000-0002-4863-8762
Ferhat Sarıçam(KARABÜK ÜNİVERSİTESİ, DEMİR ÇELİK ENSTİTÜSÜ)0000-0001-8319-7459
Yavuz Sun(KARABÜK ÜNİVERSİTESİ, DEMİR ÇELİK ENSTİTÜSÜ)0000-0002-7336-5591
Cemal Çarboğa(NEVŞEHİR ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ)0000-0001-6781-4955
Bünyamin Çiçek(HİTİT ÜNİVERSİTESİ)0000-0002-6603-7178
Pages
604–609
Publication Date
2021-01-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When the hardness and corrosive wear behavior of 8620 quality steels were examined, the optimum boron ratio was determined as 48 ppm.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; tribocorrosion tests were carried out under different loads (10, 20, and 40 N) in 3.5% sodium chloride (NaCl) solution in order to determine the corrosive wear behavior of 8620-grade commercial steels to which boron was added in different proportions.
📊
Key Findings & Data:Subsequently, surface roughness measurements were made and using the results obtained, the volume losses in the samples were determined.
💡
Conclusion & Impact:When the hardness and corrosive wear behavior of 8620 quality steels were examined, the optimum boron ratio was determined as 48 ppm.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:bor · borlu çelik · 8620 çeliği

Abstract

In this study; tribocorrosion tests were carried out under different loads (10, 20, and 40 N) in 3.5% sodium chloride (NaCl) solution in order to determine the corrosive wear behavior of 8620-grade commercial steels to which boron was added in different proportions. Subsequently, surface roughness measurements were made and using the results obtained, the volume losses in the samples were determined. The wear characteristics of the samples were analyzed by a scanning electron microscope (SEM). When the hardness and corrosive wear behavior of 8620 quality steels were examined, the optimum boron ratio was determined as 48 ppm.

Özet

Bu çalışmada; farklı oranlarda bor ilave edilen 8620 kalite ticari çeliklerin korozif aşınma davranışlarının belirlenmesi amacıyla %3,5 sodyum klorür (NaCl) çözeltisi içerisinde farklı yükler (10, 20 ve 40 N) altında korozif aşınma deneyleri gerçekleştirilmiştir. Sonrasında yüzey pürüzlülüğü ölçümleri yapılmış ve buradan elde edilen sonuçlar kullanılarak numunelerde meydana gelen hacimce kayıplar belirlenmiştir. Numunelerin aşınma karakteristikleri taramalı elektron mikroskopu (SEM) ile analiz edilmiştir. 8620 kalite çeliklerin sertlik ve korozif aşınma davranışları incelendiğinde optimum bor oranı 48 ppm olarak tespit edilmiştir.

🔖

Cite This Article

Çevik, E., Sarıçam, F., Sun, Y., Çarboğa, C., Çiçek, B. (2021). The Effect of Boron Additives on Corrosive Wear Resistance of 8620 Steels. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 21, 604–609. https://doi.org/10.31590/ejosat.799099

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Erden, M. (2016). Effect of C Content on Microstructure and Mechanical Properties of Nb-V Added Microalloyed Steel Produced by Powder Metallurgy Method. Avrupa Bilim ve Teknoloji Dergisi, 5 (9),44-47.
  2. Karlsson, L., Nordén, H., and Odelius, H. (1988). Overview no. 63 Non-equilibrium grain boundary segregation of boron in austenitic stainless steel—I. Large scale segregation behaviour. Acta Metallurgica, 36 (1): 1–12.
  3. Werner, D. H., "Boron and Boron Containing Steels", Woodhead Publishing Ltd, 2nd editio. Ed., (1995).
  4. Güneş, İ., Çelik, A. G. (1995). Borlanmış sementasyon çeliğinin tribolojik özelliklerinin incelenmesi. El-Cezeri Journal of Science and Engineering, 6 (2): 333- 344.
  5. Çelik, A. G. (2018). Characterization of Borided DIN X165 CrMoV12 Steel. El-Cezeri Journal of Science and Engineering, 5 (3): 904- 908.
  6. Çarboğa, C. (2010). Düşük karbonlu çeliklere bor ilavesinin mikroyapı ve mekanik özellikler üzerine etkisi. Doktora, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, Ankara.
  7. Aksoy, T. (2019). 4140 çeliğinin korozif aşınma özelliklerine etkisinin incelenmesi. Yüksek Lisans, Karabük Üniversitesi Fen Bilimleri Enstitüsü, Karabük.
  8. Llewellyn, D. T. and Cook, W. T. (1974). Metallurgy of boron-treated low-alloy steels. Metals Technology, 1 (1): 517–529.
  9. Taylor, K. A. and Hansen, S. S. (1990). The boron hardenability effect in thermomechanically processed, direct-quenched 0.2 Pct C steels. Metallurgical Transactions A, 21 (6): 1697–1708.
  10. Aksoy, A. (2015). Çelik Malzemelerde Hasar Analizi. Yüksek Lisans, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, İstanbul.
  11. Morral, J. E. and Cameron, T. B. (2007). A model for ferrite nucleation applied to boron hardenability. Metallurgical Transactions A, 8 (11): 1817–1819.
  12. Cheng, Y. F., Wilmott, M., and Luo, J. L. (1999). Role of chloride ions in pitting of carbon steel studied by the statistical analysis of electrochemical noise. Applied Surface Science, 152 (3): 161–168.
  13. Erden, M. (2016). Effect of C Content on Microstructure and Mechanical Properties of Nb-V Added Microalloyed Steel Produced by Powder Metallurgy Method. Avrupa Bilim ve Teknoloji Dergisi, 5 (9),44-47.