SavedAdd your journal

Journals / Avrupa Bilim ve Teknoloji Dergisi / 2026 / Sayı: 45 Özel Sayı

Investigation of the Effects of Different Duty Cycles on Fe-W Alloy Coatings Produced by Electrodeposition Method

Akımlı Yöntemle Üretilen Fe-W Alaşım Kaplamalar Üzerinde Farklı İş Çevrimlerinin Etkilerinin İncelenmesi

Buse Yavuz(Sakarya Üniversitesi)0000-0001-9095-8885
Pages
184–187
Publication Date
2022-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the Tafel polarization analysis, it was observed that the corrosion rate decreased to approximately 5mpy with increasing Ton time.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, electrodeposition Fe-W coating was applied.
📊
Key Findings & Data:Aluminum was preferred as the coated substrate.
💡
Conclusion & Impact:As a result of the Tafel polarization analysis, it was observed that the corrosion rate decreased to approximately 5mpy with increasing Ton time.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Fe-W kaplama · Korozyon oranı · Scherrer Denklemi

Abstract

In this study, electrodeposition Fe-W coating was applied. When Wolfram is compared in terms of mechanical properties, it has a harder structure than steel and shows high resistance to temperatures. Due to these properties, it will be a preferred coating in industrial applications. Aluminum was preferred as the coated substrate. The reason for this is that Aluminum performs very poorly in terms of corrosion resistance. As a result of the corrosion tests with Fe-W coating, this problem has been significantly eliminated. Different electrodeposition values were used during the coating. The deposition temperature played an important role in crystallization. As a result of characterization tests, images were taken at 3000 magnifications to see the surface morphology in obtaining SEM images. It was observed that granular morphology was formed as a result of the image. As a result of the Tafel polarization analysis, it was observed that the corrosion rate decreased to approximately 5mpy with increasing Ton time.

Özet

Fe-W kaplama, Korozyon oranı, Scherrer Denklemi, Nodüler morfoloji, İş çevrimi

🔖

Cite This Article

Yavuz, B. (2022). Investigation of the Effects of Different Duty Cycles on Fe-W Alloy Coatings Produced by Electrodeposition Method. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 45 Özel Sayı, 184–187. https://doi.org/10.31590/ejosat.1226767

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. S. Wang, C. Zeng, Y. Ling, J. Wang, G. Xu, Phase transformations and electrochemical characterizations of electrodeposited amorphous Fe–W coatings, Surf. Coatings Technol. 286 (2016) 36–41. https://doi.org/10.1016/j.surfcoat.2015.12.011.
  2. A. Nicolenco, N. Tsyntsaru, H. Cesiulis, Fe (III)-Based Ammonia-Free Bath for Electrodeposition of Fe-W Alloys, J. Electrochem. Soc. 164 (2017) D590–D596. https://doi.org/10.1149/2.1001709JES/XML.
  3. K.R. Sriraman, S. Ganesh Sundara Raman, S.K. Seshadri, Corrosion behaviour of electrodeposited nanocrystalline Ni-W and Ni-Fe-W alloys, Mater. Sci. Eng. A. 460–461 (2007) 39–45. https://doi.org/10.1016/j.msea.2007.02.055.
  4. A.L. Patterson, The scherrer formula for X-ray particle size determination, Phys. Rev. 56 (1939) 978–982. https://doi.org/10.1103/PhysRev.56.978.
  5. A. Akyol, H. Algul, M. Uysal, H. Akbulut, A. Alp, A novel approach for wear and corrosion resistance in the electroless Ni-P-W alloy with CNFs co-depositions, Appl. Surf. Sci. 453 (2018). https://doi.org/10.1016/j.apsusc.2018.05.152.