AI Summary & Key Takeaways
AI InsightThe highest softening point was found to be 79°C.
📌 3 Key Takeaways
Abstract
With increasing environmental problems, interest in natural polymers that have less toxic effects on the environment and are biodegradable is increasing day by day. Natural resin is a promising and valuable renewable non-wood forest product and is used as a natural resource in the production of many biochemical products. In this study, it is aimed to synthesize terpene-rosin phenolic resin (TRFR) from crude wood resin, turpentine and phenol in the presence of AlCl3 with an innovative polymerization technique. Before proceeding to the synthesis stage, the raw resin was separated into turpentine and rosin by distillation and characterized with a gas chromatography - mass spectroscopy (GC-MS) device. The synthesized TRFR samples were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Nuclear Magnetic Resonance Spectroscopy (NMR), acid number, saponification number and softening point analyses. Moreover, the modeling of synthesis reactions Artificial Neural Network (ANN) was designed with 2 inputs (temperature and turpentine/crude wood resin ratio) and 4 outputs (reaction yield, acid value, saponification value and softening point). The highest reaction efficiency was found in the sample produced at 60°C with a turpentine/crude wood resin ratio of 1/2. The lowest acidity and saponification values were calculated as 90.79 and 103.79 mg KOH/g, respectively. The highest softening point was found to be 79°C.
Özet
Artan çevre sorunlarıyla birlikte, çevreye toksik etkisi daha az olan ve biyolojik olarak parçalanabilen doğal polimerlere olan ilgi her geçen gün artmaktadır. Doğal reçine, gelecek vaat eden değerli yenilenebilir bir odun dışı orman ürünü olup, birçok biyokimyasal ürünün üretilmesinde doğal bir kaynak olarak kullanılmaktadır. Bu çalışmada, yenilikçi bir polimerizasyon tekniği ile ekstraksiyon reçinesi (Crude Wood Resin), terebentin ve fenolden AlCl3 eşliğinde terpen-rosin fenolik reçine (TRFR) sentezlenmesi amaçlanmaktadır. Sentez aşamasına geçmeden önce ham reçine distilasyon ile terebentin ve kolofana ayrılmış ve gaz kromotografi - kütle spektroskopisi (GC-MS) cihazı ile karakterize edilmiştir. Sentezlenen TRFR örnekleri, Fourier Dönüşümü Kızılötesi Spektroskopisi (FTIR), Nükleer Manyetik Rezonans Spektroskopisi (NMR), asit sayısı, sabunlaşma sayısı ve yumuşama noktası analizleri ile karakterize edilmiştir. Ayrıca, sentez reaksiyonlarının modellemesi Yapay Sinir Ağı (YSA) 2 girdi (sıcaklık ve terebentin/ekstraksiyon reçine oranı) ve 4 çıktı (reaksiyon verimi, asit değeri, sabunlaşma değeri ve yumuşama noktası) ile tasarlanmıştır. En yüksek reaksiyon verimi 60°C’de üretilen, terebentin/ekstraksiyon reçine oranının 1/2 olduğu örnekte bulunmuştur. En düşük asit ve sabunlaşma değerleri sırasıyla 90,79 ve 103,79 mg KOH/g olarak hesaplanmıştır. En yüksek yumuşama noktası 79°C olarak bulunmuştur.