SavedAdd your journal

Journals / Isı Bilimi ve Tekniği Dergisi / 2018 / Cilt: 38 - Sayı: 1

NUMERICAL INVESTIGATION OF THE FLAME LOCATION OF TURBULENT PREMIXED COMBUSTION IN A DIFFUSER BURNER EXPOSED TO VARIOUS TURBULENCE INTENSITIES AND TURBULENCE LENGTH SCALES

DİFÜZÖR TİPİ YANMA ODASINDA GERÇEKLEŞEN ÖN KARIŞIMLI TÜRBÜLANSLI YANMADA ORTAYA ÇIKAN ALEVİN KONUMUNUN TÜRBÜLANS YOĞUNLUĞU VE TÜRBÜLANS UZUNLUK ÖLÇÜSÜ İLE DEĞİŞİMİNİN SAYISAL OLARAK İNCELENMESİ

Ibrahim NAZZAL
Özgür ERTUNÇ
Pages
55–64
Publication Date
2018-04-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that the flame location moves toward the inlet of the diffuser combustor with an increase in turbulence intensity for moderate and high turbulence length scales.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study aims to investigate the response of the flame location of a turbulent premixed flame that has been exposed to various turbulence intensities and turbulence length scales.
📊
Key Findings & Data:Results show that the flame location moves toward the inlet of the diffuser combustor with an increase in turbulence intensity for moderate and high turbulence length scales.
💡
Conclusion & Impact:It is clearly documented how turbulence intensity and turbulence length scale simultaneously influence the flame area density, flame shape, and flame location in a diffuser- type burner.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Türbülanslı ön karışımlı yanma · alev alan yoğunluğu · türbülans yoğunluğu

Abstract

This study aims to investigate the response of the flame location of a turbulent premixed flame that has been exposed to various turbulence intensities and turbulence length scales. A diffuser-type burner is used to reveal the influence of turbulence intensity and turbulence length scales on the flame location of premixed propane–air flames without changing the inlet velocity of the fuel. Numerical simulations are performed for the turbulent premixed propane flames by using a coherent flame model under steady-state conditions. Results show that the flame location moves toward the inlet of the diffuser combustor with an increase in turbulence intensity for moderate and high turbulence length scales. The behavior of the flame location is different for the low turbulence length scale. The flame location initially decreases with an increase in turbulence intensity and subsequently stabilizes. Furthermore, the maximum flame area density is shown to increase with an increase in the turbulence intensity and the turbulence length scale, as the flame moves toward the inlet in these cases. It is clearly documented how turbulence intensity and turbulence length scale simultaneously influence the flame area density, flame shape, and flame location in a diffuser- type burner.

Özet

Bu makalenin amacı, ön karışımlı yanma sonucu oluşan alevin, çeşitli türbülans yoğunluklarına ve türbülans uzunluk ölçeğine maruz kalması sonucu oluşan alev yeri değişikliğini incelemektir. Yakıtın yanma odasına giriş hızını değiştirmeden, sadece türbülans yoğunluğunun ve türbülans uzunluk ölçeğinin alev yeri üstüne etkisini görebilmek için araştırmalar difüzör tipi yanma odasında gerçekleştirilmiştir. Propanın türbülanslı ön karışımlı yanma simulasyonları tutarlı alev modeli (coherent flame model) kullanılarak kararlı akış rejiminde gerçekleştirilmiştir. Orta ve yüksek türbülans uzunluk ölçeği kullanıldığında türbülans yoğunluğundaki artış ile alevin difüzörün girişine doğru hareket ettiği gözlemlenmiştir. Düşük uzunluk ölçeği kullanılarak gerçekleştirilen simulasyonlarda, alev türbülans yoğunluğunun artması ile girişe doğru yaklaştığı ancak türbülans yoğunluğunun daha da arttılmasına rağmen alev konumunda kayda değer bir değişiklik olmadığı gözlemlenmiştir. Sonuçlar, türbülans yoğunluğu ve türbülans uzunluk ölçeğindeki artışın, maksimum alev alan yoğunluğunu arttırdığını göstermektedir. Dahası türbülans yoğunluğunun ve uzunluk ölçeğinin alev alan yoğunluğu, alevin şekli ve konumu üzerinde aynı anda etkili olduğu gösterilmiştir.

🔖

Cite This Article

NAZZAL, I., ERTUNÇ, Ö. (2018). NUMERICAL INVESTIGATION OF THE FLAME LOCATION OF TURBULENT PREMIXED COMBUSTION IN A DIFFUSER BURNER EXPOSED TO VARIOUS TURBULENCE INTENSITIES AND TURBULENCE LENGTH SCALES. Isı Bilimi ve Tekniği Dergisi, Cilt: 38 - Sayı: 1, 55–64. https://ajindex.com/articles/133355

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Abdel-Gayed R. G., Bradley D., and Lung F. K.-K., 1989, Combustion Regimes and the Straining of Turbulent Premixed Flames, Combustion and Flame, 76, 213–218.
  2. Bagdanavicius A., Bowenb P. J., Bradleyc D., Lawes M. and Mansour M. S., 2015, Stretch Rate Effects and Flame Surface Densities in Premixed Turbulent Combustion up to 1.25 MPa, Combustion and Flame, 162, 4158-4166. Borghi R., 1989,
  3. Turbulent Combustion Modelling, Progress in Energy and combustion, 14, 145-295.
  4. Boudier P., Henriot S., Poinsot T. and Baritaud T., A, 1992, Model for Turbulent Flame Ignition and Propagation in Spark Ignition Engines, Proceedings of the Combustion Institute, 24, 503-510.
  5. Bray, K. N C, Moss and J. B., 1977, a Unified Statistical Model of the Premixed Turbulent Flame, Acta Astronautica, 4, 291-219.
  6. Cant R. S., Pope S. B., and Bray K. N. C., 1990, Modelling of Flamelet Surface-to-Volume Ratio in Turbulent Premixed Combustion, Twenty-Third Symposium Internationational on Combustion/The Combustion Institute, Cornell University, New York, 809–815. CD-adapco, 2016, STAR CCM+ Documentation and User Guide, Version 11.02.009-R8, Melville, USA. Chakraborty N., and Cant R. S., 2006, Statistical Behavior and Modeling of Theflame Normal Vectorin Turbulent Premixed Flames, Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 50, 623–643.
  7. Clavin, P., and G. Joulin., 1983, Premixed Flames in Large Scale and High-Intensity Turbulent Flow, Journal de Physique Lettres, 44, 1–12.
  8. Duclos J M, Veynante D., and Poinsot T., 1993, A Comparison of Flamelet Models for Premixed Turbulent Combustion, Combustion and Flame, 7, 101–117. Echekki T. and Mastorakos E., 2011, Turbulent Combustion Modeling (First Ed.) Springer-Verlag Berlin Heidelberg, New York:. Fru G., Thévenin D., and Janiga G., 2011, Impact of Turbulence Intensity and Equivalence Ratio on the Burning Rate of Premixed Methane-Air Flames, Energies, 4, 878–893. Gülder Ö. L., 1990, Turbulence Premixed Flame Propagation Models for Different Combustion Regimes, 23rd Symposium International on Combustion, the Combustion Institute, 23, 743-750.
  9. Gülder, Ö. L., and Smallwood G. L., 2007, Flame Surface Densities in Premixed Combustion at Medium To High Turbulence Intensities, Combustion Science and Technology, 179, 191–206. Han Insuk, and Huh K. Y., 2008, Roles of Displacement Speed on Evolution of Flame Surface Density for Different Turbulent Intensities and Lewis Numbers in Turbulent Premixed Combu