Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2018 / Cilt: 23 Sayı: 3

Simulation of Phase Equilibria in High Chromium White Cast Irons

YÜKSEK KROMLU BEYAZ DÖKME DEMİRLERDE FAZ DENGESİNİN BENZETİMİ

Öncü Akyıldız(Department of Metallurgical and Materials Engineering, Hitit University, 19030, Corum, TURKEY)0000-0002-0081-1642
Duygu Candemir(Department of Metallurgical and Materials Engineering, Hitit University, 19030, Corum, TURKEY)
Hakan Yıldırım(Duduoğlu Steel Casting Industry and Trade Inc. Co., 19040, Corum, Turkey)
Pages
179–190
Publication Date
2018-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that theoretical predictions and experimental measurements are in accord and estimating phase equilibria in multi-component systems is of practical importance.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, using the Materials Calculator software program, the pseudo binary phase diagrams (i.e. isoplethal maps) of high chromium white cast irons (~19% in weight) with different molybdenum contents were simulated.
📊
Key Findings & Data:Simulated diagrams predicted an increase in the amount of secondary M 23 C 6 carbides with increasing molybdenum content.
💡
Conclusion & Impact:Results show that theoretical predictions and experimental measurements are in accord and estimating phase equilibria in multi-component systems is of practical importance.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Hesaplamalı termodinamik · MatCalc · Alaşım tasarımı

Abstract

In this study, using the Materials Calculator software program, the pseudo binary phase diagrams (i.e. isoplethal maps) of high chromium white cast irons (~19% in weight) with different molybdenum contents were simulated. In order to test the accuracy of the calculated phase diagrams, the transformation temperatures read from the diagrams at certain compositions were compared with the phase transformation temperatures measured using Differential Scanning Calorimetry (DSC) analysis of the samples produced by casting in the same composition followed by slow cooling. With the same purpose, low temperature phases read from the phase diagrams were compared with the crystalline phases determined by X-Ray Diffraction (XRD) of the casted samples. Simulated diagrams predicted an increase in the amount of secondary M 23 C 6 carbides with increasing molybdenum content. The validity of this prediction was tested by determining the phase distribution and phase compositions in the casted samples by means of metallographic examinations and Scanning Electron Microscopy (SEM) - Energy Dispersive Spectroscopy (EDS) analyzes. When the hardness values of the samples were taken into consideration, it was seen that the hardness increased from 44.90 to 51.05 HRC with a 1% increase in Mo content and a corresponding increase in the amount of secondary carbides without any heat treatments. Results show that theoretical predictions and experimental measurements are in accord and estimating phase equilibria in multi-component systems is of practical importance.

Özet

Bu çalışmada Materials Calculator yazılımı kullanılarak, farklı molibden içeriğine sahip yüksek kromlu beyaz d ö kme demirlerin (ağırlıkça ~%19) ikilimsi faz diyagramları (eşdeğer kesit haritaları) benzetilmiştir. Hesaplanan faz diyagramlarının doğruluğunu test etmek amacı ile, diyagramlardan belirli kompozisyonlarda okunan dönüşüm sıcaklıkları, aynı kompozisyonlarda döküm sonrası yavaşça soğutularak üretilen numunelerin diferansiyel taramalı kalorimetri (İng.: Differential Scanning Calorimetry, DSC) analizi ile ölçülen faz dönüşüm sıcaklıkları ile karşılaştırılmıştır. Yine aynı amaçla, faz diyagramlarından okunan düşük sıcaklık fazları ve döküm ile üretilen numunelerin içindeki, X-ışını kırınım yöntemi (İng.: X-Ray Diffraction, XRD) ile belirlenen, kristalin fazlar karşılaştırılmıştır. Benzetilen diyagramlar, artan molibden içeriği ile ikincil M 23 C 6 karbürlerin miktarında bir artış öngörmüştür. Bu öngörünün geçerliliği döküm ile üretilen numuneler içerisindeki faz dağılımı ve faz kompozisyonlarını metalografik muayene, taramalı elektron mikroskobu (İng.: Scanning Electron Microscopy, SEM) – enerji saçınım spektrometresi (İng.: Energy Dispersive Spectroscopy, EDS) analizleri ile belirleyerek test edilmiştir. Numunelerin sertlik değerlerine bakıldığında ise, herhangi bir ısıl işlem yapılmaksızın Mo içeriğindeki %1 'lik bir artış ve buna bağlı ikincil karbürlerin miktarındaki artış ile sertliğin 44,90'dan 51,05 HRC'ye yükseldiği görülmüştür. Elde edilen sonuçlar deneysel ölçümler ve teorik tahminlerin uyumlu olduğunu ve çok bileşenli sistemlerde faz dengesinin tahmin edilebilmesinin pratik önemini göstermiştir.

🔖

Cite This Article

Akyıldız, Ö., Candemir, D., Yıldırım, H. (2018). Simulation of Phase Equilibria in High Chromium White Cast Irons. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 23 Sayı: 3, 179–190. https://doi.org/10.17482/uumfd.333701

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (28)

  1. Abdel-Aziz, K., El-Shennawy, M., Omar, A. A. (2017) Microstructural Characteristics and Mechanical Properties of Heat Treated High-Cr White Cast Iron Alloys, International Journal of Apllied Engineering Research, 12, 4675–4686.
  2. Andersson, J. O., Helander, T., Höglund, L., Shi, P., & Sundman, B. (2002) Thermo-Calc & DICTRA, computational tools for materials science. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 26(2), 273–312. doi:10.1016/S0364-5916(02)00037-8
  3. Archard, J. F. (1953) Contact of rubbing flat surfaces, Journal of Applied Physics, 24, 981–988. doi: 10.1063/1.1721448
  4. ASTM A532 / A532M-10(2014), (2014). Standard Specification for Abrasion-Resistant Cast Irons, ASTM International, West Conshohocken, PA. doi: 10.1520/A0532_A0532M-10R14
  5. Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Hack, K., Petersen, S. (2009). FactSage thermochemical software and databases - recent developments, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 33(2), 295–311. doi: 10.1016/j.calphad.2008.09.009
  6. Bedolla-Jacuinde, A., Hernández, B., and Béjar-Gómez, L. (2005) SEM study on the M7 C3 carbide nucleation during eutectic solidification of high-chromium white irons, Zeitschrift Für Metallkunde, 96(12), 1380–1385. doi: 10.3139/146.101188
  7. Cao, W., Chen, S. L., Zhang, F., Wu, K., Yang, Y., Chang, Y. A., … Oates, W. A. (2009) PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 33(2), 328–342. doi: 10.1016/j.calphad.2008.08.004
  8. Çetinkaya, C. (2003) Yüksek kromlu beyaz dökme demir malzemelerin Al2O3 ile aşınma davranışlarının incelenmesi, Politeknik Dergisi, 6(3) 559-567.
  9. Correa, R., Bedolla‐Jacuinde, A., Mejía, I., Cardoso, E., and Hernández, B. (2011) Effect of boron on microstructure of directionally solidified high chromium white irons, International Journal of Cast Metals Research, 24(1), 37–44. doi: 10.1179/136404611X12965641181767
  10. Filipovic, M., Kamberovic, Z., & Korac, M. (2011) Solidification of High Chromium White Cast Iron Alloyed with Vanadium, Materials Transactions, 52(3), 386–390. doi: 10.2320/matertrans.M2010059
  11. Harding, R.A., Saunders, N.J. (1997) Theory and Practice of Computer Modelling of Phase Diagrams for Cast Irons, Trans. American Foundrymen's Society, 105, 451-457.
  12. Heino, V., Kallio, M., Valtonen, K., Kuokkala, V.-T. (2017) The role of microstructure in high stress abrasion of white cast irons, Wear, 388–389, 119–125. doi: 10.1016/j.wear.2017.04.029
  13. Higuera-Cobos, O. F. (2015) Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles, Facultad de Ingeniería, 25(41), 93–103.
  14. Imurai, S., Thanachayanont, C., Pearce, J. T. H., & Chairuangsri, T. (2015) Microstructure And Erosion-Corrosion Behaviour Of As-Cast High Chromium White Irons Containing Molybdenum In Aqueous Sulfuric-Acid Slurry, Archives of Metallurgy and Materials, 60(2), 919–923. doi: 10.1515/amm-2015-0230
  15. Jacuinde, A. B., & Rainforth, W. M. (2001) The wear behaviour of high-chromium white cast irons as a function of silicon and Mischmetal content, Wear, 250–251(PART 1), 449–461. doi: 10.1016/S0043-1648(01)00633-0
  16. Kattner, U. R. (2016) the Calphad Method and Its Role in Material and Process Development. Tecnologia Em Metalurgia Materiais e Mineração, 13(1), 3–15. doi: 10.4322/2176-1523.1059
  17. Kozeschnik E, Buchmayr B. (2001) MatCalc - a simulation tool for multicomponent thermodynamics, diffusion and phase transformation kinetics, Mathematical modelling of weld phenomena 5, London Institute of Materials, UK, 349-361.
  18. Li, D., Liu, L., Zhang, Y., Ye, C., Ren, X., Yang, Y., Yang, Q. (2009) Phase diagram calculation of high chromium cast irons and influence of its chemical composition, Materials and Design, 30(2), 340–345. doi: 10.1016/j.matdes.2008.04.061
  19. Mampuru, L. A., Maruma, M. G., & Moema, J. S. (2016) Grain refinement of 25 wt% high-chromium white cast iron by addition of vanadium, Journal of the Southern African Institute of Mining and Metallurgy, 116(10), 969–972. doi: 10.17159/2411-9717/2016/v116n10a12
  20. Medvedeva, N. I., Van Aken, D. C., & Medvedeva, J. E. (2015) Stability of binary and ternary M23C6carbides from first principles, Computational Materials Science, 96(PA), 159–164. doi: 10.1016/j.commatsci.2014.09.016
  21. Ogi K, Matsubara Y, and Matsuda K. (1982) Eutectic solidification of high chromium cast iron-eutectic mechanism of eutectic growth, AFS Transactions, 89, 197–204.
  22. Su, Y-L., Li, D., Zhang, X-E. (2006) Optimizing hardenability of high chromium white cast iron, China Foundry, 3(4), 284-287.
  23. Tabrett, C. P., Sare, I. R., & Ghomashchi, M. R. (1996) Microstructure-property relationships in high chromium white iron alloys, International Materials Reviews, 41(2), 59–82. doi: 10.1179/095066096790326075
  24. Wiengmoon, A., Chairuangsri, T., & Pearce, J. T. H. (2005) An unusual structure of an as-cast 30% Cr alloy white iron, ISIJ International, 45(11), 1658–1665. doi: 10.2355/isijinternational.45.1658
  25. Wiengmoon, A., Pearce, J. T. H., & Chairuangsri, T. (2011) Relationship between microstructure, hardness and corrosion resistance in 20 wt.%Cr, 27 wt.%Cr and 36 wt.%Cr high chromium cast irons, Materials Chemistry and Physics, 125(3), 739–748. doi: 10.1016/j.matchemphys.2010.09.064
  26. Yen, C. L., Liu, K. L., & Pan, Y. N. (2013) Simulation of the Phase Diagrams for High-Chromium White Cast Irons and Multi-Component White Cast Irons, Advanced Materials Research, 848, 39–45. doi: 10.4028/www.scientific.net/AMR.848.39
  27. Youping, M., Xiulan, L., Yugao, L., Shuyi, Z., & Xiaoming, D. (2012) Effect of Ti-V-Nb-Mo addition on microstructure of high chromium cast iron, China Foundry, 9(2), 148–153.
  28. Zumelzu, E., Opitz, O., Cabezas, C., Parada, A., & Goyos, L. (2003) High-chromium (22-34 percent) cast iron alloys and their simulated behaviour at the sugar industry, Journal of Scientific and Industrial Research, 62(6), 583–588.