SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2026 / Cilt: 25 Sayı: 1

INVESTIGATION OF THE EFFECT OF FUSIBLE INTERLINING ON STIFFNESS AND DRAPABILITY OF WOOLLEN FABRICS

Yapışkan Telanın Yünlü Kumaşların Sertlik ve Dökümlülük Özellikleri Üzerine Etkisinin İncelenmesi

Ayca Gurarda(ULUDAĞ ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ)0000-0002-7317-8163
Pages
187–202
Publication Date
2020-04-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the fabric weigth, cover factor and weave structure of woollen woven fabrics effect fabric stiffness and drapability.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Woollen fabric most popular tailored clothing material because of the fabric excellent and natural properties.
📊
Key Findings & Data:In woollen garments, upper back, sleeve holes, collars, lapels, patch and welt pockets, and sleeve cuffs are the areas to apply interlining for more rigid appearance.
💡
Conclusion & Impact:The results showed that the fabric weigth, cover factor and weave structure of woollen woven fabrics effect fabric stiffness and drapability.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Yapışkan tela · sertlik · dökümlülük

Abstract

Woollen fabric most popular tailored clothing material because of the fabric excellent and natural properties. In woollen garments, upper back, sleeve holes, collars, lapels, patch and welt pockets, and sleeve cuffs are the areas to apply interlining for more rigid appearance. Interlining is a layer fabric sticked on the fabrics of the garment to give form and to improve stiffness of garment. In this study, the effect of fusible interlining on stiffness and drapability of woollen woven fabrics with different structural properties were investigated. For this purpose, eight woollen woven fabric samples having different structural properties were obtained. Same kind of fusible interlining applied all of these fabric samples. Therefore, woollen fabric samples without fusible interlining and with fusible interlining were obtained. The results showed that the fabric weigth, cover factor and weave structure of woollen woven fabrics effect fabric stiffness and drapability. All woollen fabrics with fusible interlining had significantly higher stiffness and drape coefficient values than woollen fabrics without fusible interlining.

Özet

Yünlü kumaş, mükemmelliği ve doğal özellikleri ile en popüler giysi malzemesidir. Yünlü giysilerde, sırt kısmı, kol evleri, yakalar, takma ve peto cepler, klapalar ve kol manşetleri, daha sert bir görünüm için tela uygulanan bölümlerdir. Tela, giysiye form vermek ve onun rijitliğini arttırmak için giysinin kumaşına yapıştırılan bir kat kumaştır. Bu çalışmada, yapışkan telanın farklı yapısal özelliklere sahip yünlü dokuma kumaşların sertliği ve dökümlülüğü üzerine etkisi araştırılmıştır. Bu amaçla, farklı yapısal özelliklere sahip sekiz yünlü dokuma kumaş numunesi seçilmiştir. Tüm bu kumaş numunelerine aynı yapışkan tela uygulanmıştır. Böylece yapışkan tela içermeyen ve içeren yünlü kumaş numuneleri elde edilmiştir. Sonuçlar, yünlü dokuma kumaşların gramajının, örtme faktörünün ve dokuma yapısının kumaş sertliğini ve dökümlülüğünü etkilediğini göstermiştir. Yapışkan tela içeren tüm yünlü kumaşlar, yapışkan tela içermeyen yünlü kumaşlara göre önemli ölçüde daha yüksek sertlik ve dökümlülük katsayısı değerlerine sahiptir.

🔖

Cite This Article

Gurarda, A. (2020). INVESTIGATION OF THE EFFECT OF FUSIBLE INTERLINING ON STIFFNESS AND DRAPABILITY OF WOOLLEN FABRICS. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 25 Sayı: 1, 187–202. https://doi.org/10.17482/uumfd.671222

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. Amar Z. and Al-Gamal G. (2015) Effect of different types and orientations of fusible interlinings on men striped shirt cuffs, Journal of American Science, 11(3), 66-72.
  2. ASTM D 3776-09a (2017) Standard Test Method for Mass per Unit Area of Fabrics, Annual Book of ASTM Standard, USA.
  3. ASTM D 3775-17 (2017) Standard Test Method for End and Pick Count of Woven Fabrics, Annual Book of ASTM Standard, USA.
  4. ASTM D 1388-64 (2002) Standard Test Methods for Stiffness of Fabrics, Annual Book of ASTM Standard, USA.
  5. Cheng K.P.S. How Y.L. and Yick K.L. (1996) The application of fabric objective measurement in shirt manufacture. International of Clothing Science and Technology, 8(4), 44-64. Doi.org/10.1108/09556229610124008
  6. Chung J. (1999) The effect of assembly methods of a garment on fabric drape. PhD Thesis, Institute of Textiles and Clothing. The Hong Kong Polytechnic University.
  7. Fan J, Yu W. and Hunter L. ( 2004) Clothing Appearance and Fit: Science and Technology, Woodhead Publishing, England.
  8. Gurarda A. (2009) The effects of seam parameters on the stiffness of woven fabrics.Journal of Textile & Clothing, 19(3), 242-247.
  9. Hu J. (2008). Fabric Testing, The Textile Institute, England.
  10. Hu J. Chung S. and Lo M.T. (1997) Effect of seams on fabric drape. Int. Journal of Clothing Science and Technology, 9(3), 220-227. Doi: 10.1108/09556229710168351
  11. Hu J. and Chan Y.F. (1998) Effect of fabric mechanical properties on drape, Textile Research Journal, 68 (1), 57- 64. Doi.org/10.1177/004051759806800107
  12. ISO 9073-9. (2008). Textiles-Test Methods for Nonwovens-Part 9: Determination of Drapability Including Drape Coefficient.
  13. Kenkare N. and Plumlee-May T. (2005) Fabric drape measurement: a modified method using digital ımage processing, Journal of Textile and Apparel Technology and Management, 4(3), 1-8.
  14. Kim KO., Inui S. and Takatera M. ( 2011) Verification of prediction for bending rigidity of woven fabric laminated with ınterlining by adhesive bonding, Textile Research Journal, 81(6), 598-607. Doi: 10.1177/0040517510387212
  15. Kim KO., Sonahara S. and Takatera M. (2015) Quantifying the appearance of jackets with adhesive interlinings, International Journal of Clothing Science and Technology, 28(1), 18-35.
  16. Matusiak M. (2017) Influence of the structural parameters of woven fabrics on their drapeability, Fibres & Textiles in Eastern Europe, 25,1(121), 56-64. Doi: 10.5604/12303666.1227883
  17. Peirce F.T. (1937) Cloth Geometry, Journal of the Textile Institute, 28(3), 45-96.
  18. Qian Z., Cheekooi C. and Wai K.C. (2016) The coefficient analysis between interlining physical properties and low-stress mechanical properties in terms of fusible interlinings and woolen fabric bonded interlinings, International Journal of Advances in Science and Technology, 4 (4), 20-23.
  19. Sanad R.A. and Cassidy T. (2016) Fabric objective measurement and drape, Textile Progress, 47(4), 317-406.
  20. Sharma K.R., Behera B.K., Roedel H. and Schenk A. (2004). Fabric low-stress mechanical properties and drapability. Indian Journal of Fibre & Textile Research, 29, 57-61.
  21. Seram N. and Rupasinghe W.(2013) The Influence of Bending Rigidity on Drape Coefficient of Selected Light Weight Woven Fabrics With Seams. International Journal of General Engineering and Technology, 2(1), 25-32.
  22. https://sdlatlas.com/products/fabric-stiffness-tester (Accessed: 31.11.2019)
  23. TS 1409, Turkish Standard (1973) Stiffness Determination of Woven Textiles.
  24. Yükselkaya M.E., Howard T. and Adanur S. ( 2008) Influence of the fabric properties on fabric stiffness for the ındustrial fabrics, Textile and Apparel, 18 (4), 263-267.
  25. https://sdlatlas.com/products/fabric-stiffness-tester (Accessed: 31.11.2019)