SavedAdd your journal

Journals / Selcuk Dental Journal / 2024 / Volume: 11 Issue: 3

Effects of Mouthwashes and Surface Treatments on the Color Stability and Surface Roughness of a Three-Dimensional Printed Interim Crown Material

Ağız Gargaraları ve Yüzey İşlemlerinin Üç Boyutlu Baskılı Geçici Kron Materyalinin Renk Stabilitesi ve Yüzey Pürüzlülüğü Üzerindeki Etkileri

Gonca Deste Gökay(Bursa Uludağ Üniversitesi Diş Hekimliği Fakültesi)0000-0002-5481-0063
Seda Üstün Aladağ(Bursa Uludağ Üniversitesi)0000-0002-6990-4660
Pages
—
Publication Date
2024-12-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Keywords: Mouthwashes, Surface Properties, Temporary Dental Restoration, Tooth Discoloration

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Background: To evaluate the color stability and surface roughness of a 3D-printed interim crown material subjected to different surface treatments while immersed in various mouthwashes.
📊
Key Findings & Data:Methods: The specimens (n=56) were manufactured with a digital light processing 3D printer.
💡
Conclusion & Impact:Keywords: Mouthwashes, Surface Properties, Temporary Dental Restoration, Tooth Discoloration
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Keywords: Mouthwashes · Surface Properties · Temporary Dental Restoration

Abstract

Background: To evaluate the color stability and surface roughness of a 3D-printed interim crown material subjected to different surface treatments while immersed in various mouthwashes. Methods: The specimens (n=56) were manufactured with a digital light processing 3D printer. Half of the specimens were coated with one layer of Ultra Glaze varnish, and other half were polished with OptraGloss. After the initial color and surface roughness values were measured, specimens were immersed in different solutions [3 mouthwashes (Andorex, Tantum Verde and Listerine) and distilled water] for 24 hours. After solution exposures, color and surface roughness measurements were repeated, and the color change (ΔE) was calculated. Two-way ANOVA and Tukey’s test were performed to analyze the color difference and surface roughness of the specimens (p .05). After solution immersion, all groups showed greater surface roughness, except for the polish group, which was immersed in Tantum Verde (p< .05). Conclusion: Mouthwashes negatively impacted the surface roughness and color stability of 3D-printed resin. The use of glazes for 3D-printed interim crowns can be recommended for long-term use. Keywords: Mouthwashes, Surface Properties, Temporary Dental Restoration, Tooth Discoloration

Özet

Amaç: Bu çalışmanın amacı, farklı yüzey işlemlerine tabi tutulmuş üç boyutlu (3B) baskılı geçici kron materyallerinin çeşitli gargaralara batırıldığında renk stabilitesini ve yüzey pürüzlülüğünü değerlendirmektir. Gereç ve Yöntemler: Örnekler (n=56) dijital ışık işlemeli 3B yazıcı ile üretildi. Örneklerin yarısına tek kat Ultra Glaze verniği uygulandı, diğer yarısına ise OptraGloss polisaj kiti ile polisaj uygulandı. Başlangıç renk ve yüzey pürüzlülük değerleri ölçüldükten sonra numuneler 24 saat boyunca farklı solüsyonlarda [3 gargara (Andorex, Tantum Verde ve Listerine) ve distile su] bekletildi. Solüsyona maruz bırakıldıktan sonra renk ve yüzey pürüzlülüğü ölçümleri tekrarlanarak numunelerin renk değişimi (ΔE) hesaplandı. Örneklerin renk değişimi ve yüzey pürüzlülüğünü analiz etmek için iki yönlü ANOVA ve post hoc Tukey testi yapıldı (p .05). Solüsyona batırıldıktan sonra, Tantum Verde'ye batırılan polisaj grubu dışında tüm gruplar önemli ölçüde daha yüksek yüzey pürüzlülüğü gösterdi (p< .05). Sonuçlar: Gargaralar, 3B baskılı geçici kron rezininin yüzey pürüzlülüğünü ve renk stabilitesini olumsuz yönde etkilemiştir. Uzun süreli kullanılması planlanan 3B baskılı geçici kuronlar için glaze ile yüzey işlemi uygulanması tavsiye edilebilir. Anahtar Kelimeler: Dişte Renk Değişikliği, Gargaralar, Geçici Diş Restorasyonu, Yüzey Özellikleri

🔖

Cite This Article

Gökay, G. D., Aladağ, S. Ü. (2024). Effects of Mouthwashes and Surface Treatments on the Color Stability and Surface Roughness of a Three-Dimensional Printed Interim Crown Material. Selcuk Dental Journal, Volume: 11 Issue: 3. https://doi.org/10.15311/selcukdentj.1514810

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (37)

  1. Yıldırım M, Aykent F, Özdoğan MS. Comparison of fracture strength, surface hardness, and color stain of conventionally fabricated, 3D printed, and CAD-CAM milled interim prosthodontic materials after thermocycling. J Adv Prosthodont. 2024;16(2):115-125.
  2. Rutkunas V, Sabaliauskas V, Mizutani H. Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials. Dent Mater J. 2010; 29:167-176.
  3. Shin JW, Kim JE, Choi YJ, et al. Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study. Materials (Basel). 2020;13(23):5359.
  4. Tahayeri A, Morgan MC, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater. 2018;34(2):192-200.
  5. Ghasemi S, Mahboub F, Babaloo A, Zohdi M, Etemadpour A, Yasamineh N. Evaluating the color stability of temporary crowns fabricated by 3-dimensional printing and manual methods. Gen Dent. 2024;72(2):40-46.
  6. Martín-Ortega N, Sallorenzo A, Casajús J, Cervera A, Revilla-León M, Gómez-Polo M. Fracture resistance of additive manufactured and milled implant-supported interim crowns. J Prosthet Dent. 2022;127(2):267-274.
  7. Della Bona A, Cantelli V, Britto VT, Collares KF, Stansbury JW. 3D printing restorative materials using a stereolithographic technique: a systematic review. Dent Mater. 2021;37(2):336-350.
  8. Gürgan S, Onen A, Köprülü H. In vitro effects of alcohol-containing and alcohol-free mouthrinses on microhardness of some restorative materials. J Oral Rehabil. 1997;24(3):244-246.
  9. Gürdal P, Akdeniz BG, Hakan Sen B. The effects of mouthrinses on microhardness and color stability of aesthetic restorative materials. J Oral Rehabil 2002;29(9):895-901.
  10. Soygun K, Varol O, Ozer A, Bolayir G. Investigations on the effects of mouthrinses on the color stability and surface roughness of different dental bioceramics. J Adv Prosthodont. 2017;9(3):200-207.
  11. Baig AR, Shori DD, Shenoi PR, Ali SN, Shetti S, Godhane A. Mouthrinses affect color stability of composite. J Conserv Dent. 2016;19(4):355-359.
  12. Sayed ME, Jain S, Ageeli AA, et al. Influence of Chairside Simulated Adjustment (Finishing and Polishing) Protocol and Chlorhexidine Mouthwash Immersion on Color Stability and Translucency of 2 and 3 Preshaded Multilayered Monolithic Zirconia. Med Sci Monit. 2024;30: e943404.
  13. Eskitaşçıoğlu M. The effects of whitening mouthrinses on the color stability of CAD/CAM resin matrix ceramics. Medical Science and Discovery. 2022;9(9):505-511.
  14. Hazar A, Hazar E. Effects of different antiviral mouthwashes on the surface roughness, hardness, and color stability of composite CAD/CAM materials. J Appl Biomater Funct Mater. 2024; 22:22808000241248886.
  15. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006; 95:137-142.
  16. Goiato MC, Dos Santos DM, Andreotti AM, et al. Effect of beverages and mouthwashes on the hardness of polymers used in intraoral prostheses. J Prosthodont. 2014;23(7):559-564.
  17. Yao Q, Morton D, Eckert GJ, Lin WS. The effect of surface treatments on the color stability of CAD-CAM interim fixed dental prostheses. J Prosthet Dent. 2021;126(2):248-253.
  18. Monterubbianesi R, Tosco V, Orilisi G, Grandini S, Orsini G, Putignano A. Surface evaluations of a nanocomposite after different finishing and polishing systems for anterior and posterior restorations. Microsc Res Tech. 2021;84(12):2922-2929.
  19. Ozen F, Demirkol N, Parlar Oz O. Effect of surface finishing treatments on the color stability of CAD/CAM materials. J Adv Prosthodont. 2020;12(3):150-156.
  20. Almejrad L, Yang CC, Morton D, Lin WS. The effects of beverages and surface treatments on the color stability of 3D-printed interim restorations. J Prosthodont. 2022;31(2):165-170.
  21. Sultan MS. Effect of hydrogen peroxide versus charcoal-based whitening mouthwashes on color, surface roughness, and color stability of enamel. BMC Oral Health. 2024;24(1):897.
  22. Kuzu TE, Karataş Ö. AĞIZ GARGARALARI VE ANTİSEPTİKLERİNİN FARKLI KOMPOZİT REZİNLERİN RENK STABİLİTESİNE ETKİSİ. Ata Diş Hek Fak Derg. 2021;31(1):71-76.
  23. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010;38 Suppl 2: e57-e64.
  24. Özarslan MM, Büyükkaplan UŞ, Barutcigil Ç, Arslan M, Türker N, Barutcigil K. Effects of different surface finishing procedures on the change in surface roughness and color of a polymer infiltrated ceramic network material. J Adv Prosthodont. 2016;8(1):16-20.
  25. Sari T, Usumez A, Strasser T, Şahinbas A, Rosentritt M. Temporary materials: comparison of in vivo and in vitro performance [published correction appears in Clin Oral Investig. 2021;25(9):5577]. Clin Oral Investig. 2020;24(11):4061-4068.
  26. Karaokutan I, Sayın Ozel G. Farklı Tekniklerle Üretilmiş Geçici Materyallerine Uygulanan Yüzey Polisaj İşlemlerinin Renk Değişimi Üzerine Etkisi. Selcuk Dent J. 2022;9(2):364-371.
  27. Lima AF, Soares GP, Vasconcellos PH, et al. Effect of surface sealants on microleakage of Class II restorations after thermocycling and long-term water storage. J Adhes Dent. 2011;13(3):249-254.
  28. Gruber S, Kamnoedboon P, Özcan M, Srinivasan M. CAD/CAM Complete Denture Resins: An In Vitro Evaluation of Color Stability. J Prosthodont. 2021;30(5):430-439.
  29. Valenti C, Isabella Federici M, Masciotti F, et al. Mechanical properties of 3D printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies. J Prosthet Dent. 2024;132(2):381-391.
  30. Barcelos LM, Borges MG, Soares CJ, et al. Effect of the photoinitiator system on the polymerization of secondary methacrylamides of systematically varied structure for dental adhesive applications. Dent Mater. 2020;36(3):468-477.
  31. Schneider LF, Cavalcante LM, Prahl SA, Pfeifer CS, Ferracane JL. Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide. Dent Mater. 2012;28(4):392-397.
  32. Grymak A, Aarts JM, Cameron AB, Choi JJE. Evaluation of wear resistance and surface properties of additively manufactured restorative dental materials. J Dent. 2024; 147:105120.
  33. Jones CS, Billington RW, Pearson GJ. The in vivo perception of roughness of restorations. Br Dent J. 2004;196(1):42-31.
  34. Turgut S, Bagis B, Ayaz EA, et al. Discoloration of Provisional Restorations after Oral Rinses. Int J Med Sci. 2013;10(11):1503-1509.
  35. Morais Sampaio GA, Rangel Peixoto L, Vasconcelos Neves G, Nascimento Barbosa DD. Effect of mouthwashes on color stability of composite resins: A systematic review. J Prosthet Dent. 2021;126(3):386-392.
  36. Bagis B, Baltacioglu E, Özcan M, Ustaomer S. Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study. Quintessence Int. 2011;42(3):213-223.
  37. Münchow EA, Ferreira AC, Machado RM, Ramos TS, Rodrigues-Junior SA, Zanchi CH. Effect of acidic solutions on the surface degradation of a microhybrid composite resin. Braz Dent J. 2014;25(4):321-326.