Journals / Politeknik Dergisi / 2026 / Cilt: 8 Sayı: 1

Development and Testing of a Cutting Force Dynamometer for Milling

Pages
61–64
Publication Date
2005-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Although the dynamometer was developed primarily for milling operations, it can be used to measure cutting forces during nearly all machining operations (turning, drilling, grinding, shaping etc.)

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The cutting forces generated in metal cutting have a direct influence on heat generation, tool wear or failure, quality of machined surface and accuracy of the workpiece.
📊
Key Findings & Data:In this study, a milling dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer respectively has been designed and developed.
💡
Conclusion & Impact:Although the dynamometer was developed primarily for milling operations, it can be used to measure cutting forces during nearly all machining operations (turning, drilling, grinding, shaping etc.)
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Dynamometer · Strain gauge · Data acquisition

Abstract

The cutting forces generated in metal cutting have a direct influence on heat generation, tool wear or failure, quality of machined surface and accuracy of the workpiece. In this study, a milling dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer respectively has been designed and developed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize crosssensitivity. The developed dynamometer is connected to a data acquisition system. Cutting force signals were captured and transformed into numerical form and processed using a data acquisition system consisting of necessary hardware and software running on MS-Windows based personal computer. The obtained results of machining tests performed at different cutting parameters showed that the dynamometer could be used reliably to measure cutting forces. Although the dynamometer was developed primarily for milling operations, it can be used to measure cutting forces during nearly all machining operations (turning, drilling, grinding, shaping etc.)

Özet

The cutting forces generated in metal cutting have a direct influence on heat generation, tool wear or failure, quality of machined surface and accuracy of the workpiece. In this study, a milling dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer respectively has been designed and developed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize cross-sensitivity. The developed dynamometer is connected to a data acquisition system. Cutting force signals were captured and transformed into numerical form and processed using a data acquisition system consisting of necessary hardware and software running on MS-Windows based personal computer. The obtained results of machining tests performed at different cutting parameters showed that the dynamometer could be used reliably to measure cutting forces. Although the dynamometer was developed primarily for milling operations, it can be used to measure cutting forces during nearly all machining operations (turning, drilling, grinding, shaping etc.)

🔖

Cite This Article

Yaldız, S. (2005). Development and Testing of a Cutting Force Dynamometer for Milling. Politeknik Dergisi, Cilt: 8 Sayı: 1, 61–64. https://ajindex.com/articles/1303229

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...