SavedAdd your journal

Journals / Politeknik Dergisi / 2021 / Cilt: 24 Sayı: 1

Frequency Response of an Initially Stressed Slab Made from Three Compressible Materials

Ahmet Daşdemir(KASTAMONU UNIVERSITY)0000-0001-8352-2020
Pages
275–282
Publication Date
2021-03-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Particularly, the effect the ratio of the layer length has on the frequency response of the slab was presented.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the frequency response of a pre-stressed slab, which stands on a rigid foundation, subject to a timely harmonic loading was considered.
📊
Key Findings & Data:The investigation is implemented according to the piecewise homogeneous body model utilizing the three-dimensional linearized theory of elastic waves in initially stressed bodies (TLTEWISB).
💡
Conclusion & Impact:Particularly, the effect the ratio of the layer length has on the frequency response of the slab was presented.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Complete contact condition · compressible material · dynamic response

Abstract

In this study, the frequency response of a pre-stressed slab, which stands on a rigid foundation, subject to a timely harmonic loading was considered. The investigation is implemented according to the piecewise homogeneous body model utilizing the three-dimensional linearized theory of elastic waves in initially stressed bodies (TLTEWISB). The considered body was designed joining to three discrete slabs side-by-side. It was assumed that there exists a rigidly clamping state at all interface planes on the system. A mathematical model of the problem is constructed and the system related to equations of motion is numerically solved using the finite element method (FEM). Particularly, the effect the ratio of the layer length has on the frequency response of the slab was presented.

Özet

In this study, the frequency response of a pre-stressed slab, which stands on a rigid foundation, subject to a timely harmonic loading was considered. The investigation is implemented according to the piecewise homogeneous body model utilizing the three-dimensional linearized theory of elastic waves in initially stressed bodies (TLTEWISB). The considered body was designed joining to three discrete slabs side-by-side. It was assumed that there exists a rigidly clamping state at all interface planes on the system. A mathematical model of the problem is constructed and the system related to equations of motion is numerically solved using the finite element method (FEM). Particularly, the effect the ratio of the layer length has on the frequency response of the slab was presented.

🔖

Cite This Article

Daşdemir, A., *, A. D. (2021). Frequency Response of an Initially Stressed Slab Made from Three Compressible Materials. Politeknik Dergisi, Cilt: 24 Sayı: 1, 275–282. https://doi.org/10.2339/politeknik.650808

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Guz A.N., “Fundamentals of the Three-dimensional Theory of Stability of Deformable Bodies”, (trans. from Russian by M. Kashtalian), Springer-Verlag, New York, (1999).
  2. Akbarov S.D., “Stability Loss and Buckling Delamination: Three-Dimensional Linearized Approach for Elastic and Viscoelastic Composites”, Springer-Verlag, New York, (2013).
  3. Akbarov S.D., “Dynamics of Pre-Strained Bi-Material Elastic Systems: Linearized Three-Dimensional Approach”, Springer-Verlag, New York, (2015).
  4. Wen-tao H., Tang-dai X., Wei-yun C., “Influence of lateral initial pressure on axisymmetric wave propagation in hollow cylinder based on first power hypo-elastic model”, Journal of Central South University, 21(2): 753-760, (2014).
  5. Daşdemir A., Eröz M., “Mathematical modeling of dynamical stress field problem for a pre-stressed bi-layered plate-strip”, Bulletin of the Malaysian Mathematical Sciences Society, 38(2): 733-760, (2015).
  6. Daşdemir A., “Dynamic response of a pre-stressed bi-layered plate-strip subjected to an arbitrary inclined time-harmonic force”, Creative Mathematics and Informatics, 26(3): 255-262, (2017).
  7. Daşdemir A., “Effect of initial stress on the dynamic response of a multi-layered plate-strip subjected to an arbitrary inclined time-harmonic force”, International Journal of Applied Mechanics and Engineering, 22(3): 521-537, (2017).
  8. Sergienko I.V., Deineka V.S., “Numerical solution of the dynamic problem of elasticity for bodies with concentrated masses”, International Applied Mechanics, 40(12): 1360-1370, (2004).
  9. Akbarov S.D., Zamanov A.D., Suleimanov T.R., “Forced vibration of a prestretched two-layer slab on a rigid foundation”, Mechanics of Composite Materials, 41(3): 229-240, (2005).
  10. Zhuk Y.A., Guz I.A., “Features of propagation of plane waves along to the layers of an initially stressed nanocomposite material”, International Applied Mechanics, 43(4): 3-26, (2007).
  11. Pandit M.K., Singh B.N., Sheikh A.H., “Buckling of laminated sandwich plates with soft core based on an improved higher order zigzag theory”, Thin-Walled Structures, 46(11): 1183-1191, (2008).
  12. Zienkiewicz O.C., Taylor R.L., “The Finite Element Method, Basic Formulation and Linear Problems”, McGraw-Hill, London, (1989).
  13. Uflyand Ya.S., “Integral Transformations in the Theory of Elasticity”, Nauka, Moscow-Leningrad, (1963).