SavedAdd your journal

Journals / International Journal of Applied Mathematics Electronics and Computers / 2026 / Volume: 4 Issue: 4

Determining Fire Door Resistance Through Infrared Thermography

Mustafa Altın
Pages
—
Publication Date
2016-12-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The utility of Infrared Thermography (IRT) method that is a contactless and distant measurement technique of temperature is shown to be used for fire tests with the traditional methods.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The resistance tests of two fire doors with standard opening single were made using the methods of thermocouples and infrared thermography according to the features stated in the regulations.
📊
Key Findings & Data:With the traditional fire mechanism stated in the regulation of TS EN 1634-1, a fire resistance test of 50 and 56 minutes was made.
💡
Conclusion & Impact:The utility of Infrared Thermography (IRT) method that is a contactless and distant measurement technique of temperature is shown to be used for fire tests with the traditional methods.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Thermal camera · image proses · fire doors

Abstract

The resistance tests of two fire doors with standard opening single were made using the methods of thermocouples and infrared thermography according to the features stated in the regulations. With the traditional fire mechanism stated in the regulation of TS EN 1634-1, a fire resistance test of 50 and 56 minutes was made. In the 32nd and 34th minutes of the experiment, opening was observed at the upper right-hand corners of standard opening single fire doors that were tested. Temperature values obtained from the measurement points stated in the regulation were controlled and with 200 thermal images that were obtained image process were applied. The utility of Infrared Thermography (IRT) method that is a contactless and distant measurement technique of temperature is shown to be used for fire tests with the traditional methods.

🔖

Cite This Article

Altın, M. (2016). Determining Fire Door Resistance Through Infrared Thermography. International Journal of Applied Mathematics Electronics and Computers, Volume: 4 Issue: 4. https://ajindex.com/articles/1273860

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. J. A. Capote, D. Alvear e.g. “Assessment of Physical Phenomena Associated to Fire Doors During Standard”, Tests Fire Technology, 2012, DOI: 10.1007/s10694-012-0270-0 [2] Bennetts I.D., Moinuddin K.A.M., Gohy C.C. and Thomas I.R., “Testing and factors relevant to the evaluation of the structural adequacy of steel members within fire-resistant elevator shafts”, Fire Safety Journal 40 (2005) 698–727 [3] Kılıç A.,http://www.yangin.org/dosyalar/yangin_kapilari. pdf [4] Barreira, E. and De Freitas, V.P., (2007). “Evaluation of building materials using infrared thermography”, Construction and Building Materials"; 21; 218–224. [5] Selek, M., Sahin, Ö.S., Kahramanlı, S., 2009. “Using artificial neural networks for realtime observation of the endurance state of a steel specimen under loading”, Expert Systems with Applications 36-4, 7400-7408.
  2. J. A. Capote, D. Alvear e.g. “Assessment of Physical Phenomena Associated to Fire Doors During Standard”, Tests Fire Technology, 2012, DOI: 10.1007/s10694-012-0270-0 [2] Bennetts I.D., Moinuddin K.A.M., Gohy C.C. and Thomas I.R., “Testing and factors relevant to the evaluation of the structural adequacy of steel members within fire-resistant elevator shafts”, Fire Safety Journal 40 (2005) 698–727 [3] Kılıç A.,http://www.yangin.org/dosyalar/yangin_kapilari. pdf [4] Barreira, E. and De Freitas, V.P., (2007). “Evaluation of building materials using infrared thermography”, Construction and Building Materials"; 21; 218–224. [5] Selek, M., Sahin, Ö.S., Kahramanlı, S., 2009. “Using artificial neural networks for realtime observation of the endurance state of a steel specimen under loading”, Expert Systems with Applications 36-4, 7400-7408.