SavedAdd your journal

Journals / International Journal of Advances in Engineering and Pure Sciences / 2026 / Cilt: 27 Sayı: 0 Özel Sayı

Development of An Inline Quality Measurement System For Tufting Process

-

Mesut Çetin
Sven Schofer
Thomas Grıes
Pages
1–4
Publication Date
2015-07-09
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Missing carbon fibre reinforced plastic production facilities which are fully automated are hindering to the manufacture of large-scale CFRP-components.
📊
Key Findings & Data:A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales.
💡
Conclusion & Impact:Because the preforming process is only partly automatable, high costs arise.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Tufting Process · seam defects · inline quality measurement

Abstract

Missing carbon fibre reinforced plastic production facilities which are fully automated are hindering to the manufacture of large-scale CFRP-components. A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales. Starting point of the preform process are usually flat textiles structures such as woven or multiaxial. After a precut process they further processed in a sequence of handling, forming, joining and edging to complex, near-net-shape textile preform. Afterwards the preform is consolidated via a resin transfer moulding process. Because the preforming process is only partly automatable, high costs arise.

Özet

-

🔖

Cite This Article

Çetin, M., Schofer, S., Grıes, T. (2015). Development of An Inline Quality Measurement System For Tufting Process. International Journal of Advances in Engineering and Pure Sciences, Cilt: 27 Sayı: 0 Özel Sayı, 1–4. https://doi.org/10.7240/mufbed.34470

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. AVK - Industrievereinigung verstärkte Kunststoffe e.V.: Composites - Marktbericht: Marktentwicklungen, Herausforderungen und Chancen, 2010
  2. Ehrenstein, G.W.:
  3. Faserverbund-Kunststoffe.
  4. Werkstoffe – Verarbeitung – Eigenschaften, 2. Aufl.
  5. München, Wien: Carl Hanser Verlag, 2006
  6. Frauenhofer, M.; Dilger, K.; Böhm, S.; Ströhlein, T.: Induction technique in manufacturing preforms, Mechanics of Composite Materials, Vol. 44, No. 5, 2008
  7. Cetin M.; Klingele J.; Wellekötter J.; Samorey, T.; Gries T.: Innovative Use of Expanded Polystyrene (EPS) For Textile Preforming, 1st Joint Turkey-Japan Workshop on Polymeric Composite Materials, Sabancı University, Istanbul, Türkei, 2014
  8. Cetin, M.; Hinck, T.; Pohlmann E.-M.; Gries, T.: Tufting process for preform fixation on foams for safe handling operations, XIII. International Izmir Textile and Apparel Symposium, Belek, Turkey, 2014.