Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 3 Sayı: 1

Investigation of The Settling Efficiency at Inlet Weir of Sedimentation Tanks

Çöktürme Havuzlarında Giriş Yapılarının Çöktürme Verimine Olan Etkisinin İncelenmesi

Pages
41–46
Publication Date
2013-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The settling efficiency for the second type about 90% at the end of experiments

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Emerging environmental problems brought about by industrialization, increasing population and growing environmental pollution solutions are constantly renewed.
📊
Key Findings & Data:During experiments, potassium permanganate has used for determine flow regime and dispersion characteristics (500ppm) and Calcium carbonate for settling determinations at various concentrations.
💡
Conclusion & Impact:The settling efficiency for the second type about 90% at the end of experiments
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Çöktürme havuzu · çöktürme verimi · dispersiyon

Abstract

Emerging environmental problems brought about by industrialization, increasing population and growing environmental pollution solutions are constantly renewed. Emerging many scientific studies have been overcome, especially water and waste water treatment methods. The effect of inlet and outlet weir type of rectangular sedimentation tanks to the settling efficiency has investigated. During experiments, potassium permanganate has used for determine flow regime and dispersion characteristics (500ppm) and Calcium carbonate for settling determinations at various concentrations. It has been observed that especially the inlet weir type have an important role on the settling efficiency. The settling efficiency for the second type about 90% at the end of experiments

Özet

Gelişen sanayileşme artan nüfus ve beraberinde getirdiği çevre sorunları ile çevre kirliliği artmakta çözüm yolları sürekli yenilenmektedir. Gelişen birçok bilimsel çalışmalar ile özellikle su ve atık su arıtım yöntemlerinde ilerlemeler kaydedilmektedir. Bu çalışmada su ve atık su arıtma tesislerinin en önemli proseslerinden çöktürme havuzlarında verimin arttırılması için giriş yapılarının katkısı araştırılmıştır. Dikdörtgen planlı yatay akışlı bir çöktürme havuzunda giriş ve çıkış yapılarının, çökelme verimine etkisi incelenmiştir. Çalışma sırasında yapılan denemelerde kullanılan her havuz tipinde akım rejimi ve dispersiyon karakteristiğinin belirlenmesi için de çeşitli derişiklerde CaCO3 çözeltisi kullanılmıştır. Özellikle giriş yapılarının çökelme verimi üzerinde büyük etkilerinin olduğu görülmüş olup, 2.tip havuz tipinde % 90 üzerinde bir verime ulaşılmıştır

🔖

Cite This Article

Kocadağıstan, B., Kocadağıstan, E., İrdemez, Ş., Topçu, N. (2013). Investigation of The Settling Efficiency at Inlet Weir of Sedimentation Tanks. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 3 Sayı: 1, 41–46. https://ajindex.com/articles/1273275

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Dufresne, M.V, Vazguez, J., Terfous, A., Ghenaim, A., Poulet, J.B., 2009. Experimental investigation and CFD modelling of flow, sedimantion and solids separation in a combined sewer deten- tion tank. Computing Fluids, 38: 1042-1049.
  2. Eroğlu, V.,1995. Su tasfiyesi. İTÜ İnşaat Fakültesi Matbaası, İstan- bul.
  3. Goula, A.M., Kostoglou, M., Karapantsios, T.D., Zouboulis, A.I.A., 2008. CFD methotodology for the design of sedimantation tanks in potable water treatment case study: the influence of a feed flow control baffle. Chemical Engineering Journal, 140: 110-121.
  4. Krebs, P.,Vischer, D.,Gujer, W., 1995. Inlet structure design for final clarifiers. Journal of Enviromental Engineering 121(8): 558- 564.
  5. Tchobbanoglous,G., 1991. Wastewater engineering treatment dis- posal and reuse. McGraw-Hill, New York.
  6. Muslu, Y.,1995. Atıksuların arıtılması. İTÜ Matbaası, Ayazağa, İs- tanbul.
  7. Tokgöz, S., 2000. Yukarı akışlı anaerobik filtre model reaktöründe temiz yatak hidrolik özelliklerinin belirlenmesi. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Der- gisi, 2(3): 7-12.
  8. Toprak, H., Özer, A.,Uslu, O., 1989. Su ve atıksu arıtımında çökelt- me yüzdürme ve mekanik filtrasyon. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Matbaası, İzmir.
  9. Lynn, D.A, Stamou, A. I, Rodi, W., 1992. Density currents and shear-induced flocculation in sedimantion tanks. Journal of Hydro-Engineering ASCE, 118(6): 849-864.
  10. Sammarraee, M.A, Chan, A., Mahabaleswar, U.S., 2009. Large- eddy simulations of particle sedimentation in a longitudinal sedimentation basin of a water treatment plant: Part I: Particle settling performance. Chemical Engineering Journal, 152(2- 3): 307-314.
  11. Tchobbanoglous,G., 1991. Wastewater engineering treatment dis- posal and reuse. McGraw-Hill, New York.