SavedAdd your journal

Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 11 Sayı: 3

Production and Electrochemical Properties of Maricite NaFePO4 Cathode Material

Maricite NaFePO4 Katot Malzemesinin Üretimi ve Elektrokimyasal Özellikleri

Serdar Altın(inönü üniversitesi)0000-0002-4590-907X
Abdurrahman Yolun(inönü üniversitesi)0000-0001-5938-3534
Erdinç Öz(Bilkent üniversitesi)0000-0003-4321-8264
Sebahat Altundağ(inönü üniversitesi)0000-0002-4777-8376
Pages
1970–1979
Publication Date
2021-09-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that the initial discharge capacity of this battery was 26.29 mAh g-1 and the capacity value increased %10.99 at the end of the 100th cycle.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The use of energy generation and storage technologies has gained great importance in recent years.
📊
Key Findings & Data:In this study, NaFePO4 cathode material was produced by applying two-steps heat treatments with solid state reaction method.
💡
Conclusion & Impact:It was observed that the initial discharge capacity of this battery was 26.29 mAh g-1 and the capacity value increased %10.99 at the end of the 100th cycle.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Şarj edilebilir pil · katot malzemesi · sodyum

Abstract

The use of energy generation and storage technologies has gained great importance in recent years. Considering the developments in the field of sodium ion batteries (Na-ion), because of their low cost, these materials will be an alternative to lithium ion (Li-ion) batteries in the near future. The important reasons that make Na-ion batteries so attractive are that they have similar chemical properties with lithium and their production costs are lower. In this study, NaFePO4 cathode material was produced by applying two-steps heat treatments with solid state reaction method. For the structural characterization of produced materials XRD, SEM, FTIR were used and their magnetic properties were investigated by χ-T analyzes. Cyclic voltammetry (CV) and capacity measurements were made to investigate the battery performance and electrochemical properties of cathode materials. There was not observed impurity phases in XRD analysis in the structure of the NaFePO4 cathode material. The capacity of cathode materials has been measured for 100 cycles in the 1.5-4.0 V range. It was observed that the initial discharge capacity of this battery was 26.29 mAh g-1 and the capacity value increased %10.99 at the end of the 100th cycle.

Özet

Enerji üretimi ve depolama teknolojilerinin kullanımı son yıllarda büyük bir önem kazanmıştır. Sodyum iyon piller (Na-iyon) alanındaki gelişmelere bakıldığında düşük maliyetlerinden dolayı lityum iyon (Li-iyon) pillere alternatif olarak yakın gelecekte ümit vadetmektedir. Na-iyon pilleri bu kadar cazip hale getiren başlıca nedenler lityum ile benzer kimyasal özelliklere sahip olması ve üretim maliyetlerinin daha düşük olmasıdır. Bu çalışmada NaFePO4 katot malzemesinin üretiminde iki kademeli ısıl işlem ile katı hal reaksiyon yöntemi uygulanmıştır. Üretilen malzemelerin fiziksel karekterizasyonları için XRD, SEM, FTIR kullanılmış, manyetik özellikleri ise χ-T analizleri ile incelenmiştir. Pillerin performansını ve elektrokimyasal özelliklerini araştırmak için üretilen katot malzemeleri CR2032 düğme pil haline getirilerek döngüsel voltametri (CV) ve kapasite ölçümleri yapılmıştır. NaFePO4 katot malzemesinin XRD analizlerinde safsızlık fazları gözlenmemiştir. Pil haline getirilmiş katot materyallerinin 1,5-4,0 V aralığında 100 döngülük kapasite değeri ölçülmüş, ilk deşarj kapasitesinin 26,29 mAh g-1 olduğu ve 100. döngü sonunda kapasite değerinin ilk döngüye oranla %10.99 arttığı gözlemlenmiştir.

🔖

Cite This Article

Altın, S., Yolun, A., Öz, E., Altundağ, S. (2021). Production and Electrochemical Properties of Maricite NaFePO4 Cathode Material. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 11 Sayı: 3, 1970–1979. https://doi.org/10.21597/jist.856515

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. Altundağ S, Altin S, Yolun A, Canbay CA, 2020. Na0.67Mn0.5Fe0.5O2 Katot Malzemelerinin Üretimi, Yapısal ve Elektrokimyasal Özelliklerinin İncelenmesi. Fırat Üniversitesi Fen Bilimleri Dergisi. 32(2): 21-30.
  2. Avdeev M, Mohamed Z, Ling DC, Lu J, Tamaru M, Yamada A, Barpanda P, 2013. Magnetic Structures of NaFePO4 Maricite and Triphylite Polymorphs for Sodium-Ion Batteries. Inorganic Chemistry, 52(15): 8685-8693.
  3. Ellis B L, Makahnouk WRM, Makimura Y, Toghill K, Nazar LF, 2007. A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries. Nature Materials, 6: 749-753.
  4. Fernandez-Ropero AJ, Saurel D, Acebedo B, Rojo T, Casas-Cabanas M, 2014. Electrochemical characterization of NaFePO4 as positive electrode in aqueous sodium-ion batteries. Journal of Power Sources, 291: 40-45.
  5. He M, Kravchyk K, Walter M, Kovalenko M. V, 2014. Monodisperse Antimony Nanocrystals for High-Rate Li-ion and Na- ion Battery Anodes: Nano versus Bulk. Nano Letters, 14: 1255−1262.
  6. Heubner C, Heiden S, Schneider M, Michaelis A, 2017. Electrochimica Acta In-situ preparation and electrochemical characterization of submicron sized NaFePO4 cathode material for sodium-ion batteries. Electrochimica Acta, 233:78–84.
  7. Hwang J, Matsumoto K, Orikasa Y, Katayama M, InadaY, NohiraT, Hagiwara R, 2018. Crystalline maricite NaFePO4 as a positive electrode material for sodium secondary batteries operating at intermediate temperature. Journal of Power Sources, 377: 80–86.
  8. Hwang J Y, Myung S T, Sun Y K, 2017. Sodium-ion batteries: Present and Future. International Chemical Society Reviews, 46(12): 3529–3614.
  9. Jana S, Lingannan G, Ishtiyak M, Panigrahi G, Sonachalam A, Prakash J, 2020. Syntheses, crystal structures, optical, Raman spectroscopy, and magnetic properties of two polymorphs of NaMnPO4. Materials Research Bulletin, 126: 110835
  10. Jin T, Li H, Zhu K, Wang P. F, Liu P, Jiao L, 2020. Polyanion-type cathode materials for sodium-ion batteries. Chemical Society Reviews, 49(8): 2342–2377.
  11. Kapaev R R, Chekannikov A A, Novikova S A, Kulova T L, Skundin M, Yaroslavtsev A B, 2017. Activation of NaFePO4 with maricite structure for application as a cathode material in sodium-ion batteries. Italian Oral Surgery, 27(3): 263–264.
  12. Kim J, Seo D, Kim H, Park I, Yoo J, 2015. Unexpected discovery of low-cost maricite NaFePO4 as a high-performance electrode for Na-ion batteries, Energy Environmental Science, 8: 540-545.
  13. Kosova N V, Podugolnikov V R, Devyatkina E T, Slobodyuk A B, 2014. Structure and electrochemistry of NaFePO4 and Na2FePO4F cathode materials prepared via mechanochemical route. Materials Research Bulletin, 60: 849–857.
  14. Li C, Miao X, Chu W, Wu P, Tong D. G, 2015. Hollow amorphous NaFePO4 nanospheres as a high-capacity and high-rate cathode for sodium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 3: 8265–8271.
  15. Liu Y, Zhang N, Wang F, Liu X, Jiao L, Fan L, 2018. Approaching the Downsizing Limit of Maricite NaFePO4 toward High-Performance Cathode for Sodium-Ion Batteries. Advanced Functional Materials, 28(30): 1801917
  16. Masias A, Marcicki J, Paxton W A, 2021. Opportunities and Challenges of Lithium Ion Batteries in Automotive Applications. ACS Energy Letters, 6(2): 621-630.
  17. Massot L, Chamelot P, Cassayre L, Taxil P, 2009. Electrochemical study of the Eu(III)/Eu(II) system in molten fluoride media. Electrochemica Acta, 54(26): 6361-6366.
  18. Mukherjee S, Bin Mujib S, Soares D, Singh G, 2019. Electrode Materials for High-Performance Sodium-Ion Batteries. Materials, 12(12): 1952.
  19. Murugesan C, Lochab S, Senthilkumar B, Barpanda P, 2018. Earth-Abundant Alkali Iron Phosphates ( AFePO4 ) as Efficient Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Solution, ChemCatChem 10: 1122 – 1127.
  20. Oh S M, Myung S T, Hassoun J, Scrosati B, Sun Y K, 2012. Reversible NaFePO4 electrode for sodium secondary batteries. Electrochemistry Communications, 22(1): 149–152.
  21. Priyanka V, Subadevi R, Sivakumar M, 2017. Synthesis And Structural Analysis of NaFePO4 Nanocomposite For Sodium Ion Batteries. International Research Journal of Engineering and Technology, 4(9): 3–6.
  22. Rahman M, Sultana I, Mateti S, Liu J, Sharma N, Chen Y, 2017. Maricite NaFePO4/C/graphene: a novel hybrid cathode for sodium-ion batteries. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 5: 16616–16621.
  23. Tang W, Song X, Du Y, Peng C, Lin M, Xi S, Tian B, Zheng J, Wu Y, Pan F, Loh K. P, 2016. High-performance NaFePO4 formed by aqueous ion-exchange and its mechanism for advanced sodium ion batteries. Journal of Materials Chemistry A, 4(13): 4882–4892.
  24. Trottier J, Hovington P, Brochu F, Rodrigues I, Zaghib K, Mauger A, Julien C. M, 2011. NaFePO4 Olivine as Electrode Materials for Electrochemical Cells. ECS Transactions, 35(34), 123–128.
  25. Wang D, Wu Y, Lv J, Wang R, Xu S, 2019. Carbon encapsulated maricite NaFePO4 nanoparticles as cathode material for sodium-ion batteries. Colloids and Surfaces A, 583: 123957.
  26. Wang J, Sun X, 2015. Olivine LiFePO4: The remaining challenges for future energy storage. International Energy and Environmental Science 8(4): 1110–1138.
  27. Zhao L, Zhou D, Huang W, Kang X, Shi Q, Deng Z, Yan X, Yu Y, 2017. Electrochemical performances of maricite NaFePO4/C as cathode material for sodium-ion and lithium-ion batteries. International Journal of Electrochemical Science, 12(4): 3153–3165.
  28. Fernandez-Ropero AJ, Saurel D, Acebedo B, Rojo T, Casas-Cabanas M, 2014. Electrochemical characterization of NaFePO4 as positive electrode in aqueous sodium-ion batteries. Journal of Power Sources, 291: 40-45.
  29. Jana S, Lingannan G, Ishtiyak M, Panigrahi G, Sonachalam A, Prakash J, 2020. Syntheses, crystal structures, optical, Raman spectroscopy, and magnetic properties of two polymorphs of NaMnPO4. Materials Research Bulletin, 126: 110835