Journals / Gazi University Journal of Science / 2026 / Volume: 22 Issue: 3

Electronic Cam Motion Generation by Using Stepper Motors and Pinion Gears

Pages
—
Publication Date
2010-03-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

With this method, one can obtain a high-speed, reliable and application-oriented motion, just as obtained from a mechanical cam system.                                                        Key Words : Electronic Cam, GUI, Programming, Stepper Motor, Pinion Gear.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electronic cam is a combination of a computer program for motion definition and a high performance servo mechanism.
📊
Key Findings & Data:In this study a new method for generating electronic cam motion is introduced.
💡
Conclusion & Impact:With this method, one can obtain a high-speed, reliable and application-oriented motion, just as obtained from a mechanical cam system.                                                        Key Words : Electronic Cam, GUI, Programming, Stepper Motor, Pinion Gear.
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Electronic cam is a combination of a computer program for motion definition and a high performance servo mechanism. In this study a new method for generating electronic cam motion is introduced. The proposed method, based on a Graphical User Interface (GUI), uses a stepper motor and a rack-pinion system. The proposed electronic cam allows the user to create any type of non-linear motion in setup limitations. The GUI offers to enter parameters of the stepper motor which will be used as an actuator, takes data of the cam from defined position, plots the basic graphs on cam-follower mechanism, gets parameters of the pinion gear converting the rotary motion into the linear motion, sets up the computer connection and runs the stepper motor in real time by using a PC’s parallel port. Besides, it allows the user to animate both classical and proposed cam mechanisms. With this method, one can obtain a high-speed, reliable and application-oriented motion, just as obtained from a mechanical cam system.                                                        Key Words : Electronic Cam, GUI, Programming, Stepper Motor, Pinion Gear.

🔖

Cite This Article

Altıntas, A. (2010). Electronic Cam Motion Generation by Using Stepper Motors and Pinion Gears. Gazi University Journal of Science, Volume: 22 Issue: 3. https://ajindex.com/articles/1270039

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Kim, D.H., Tsao, T.C., “Robust performance control of electrohydraulic actuators for electronic cam motion generation”, IEEE Trans. on Control Syst. Technol., 8(2): 220-227 (2000).
  2. Chung-Shu, L., Shyr-Long, J., Wei-Hua, C.,
  3. “Electronic cam motion generation with special reference to constrained velocity, acceleration, and jerk”, ISA Transactions, 43(3): 427-443 (2004).
  4. Yang-Hung, C., Wei-Hua, C., Chung-Shu, L., Shyr-Long, J., “A novel master switching method for electronic cam control with special reference to multi-axis coordinated trajectory Control Engineering Practice, 14(2): 107-120 (2006). following”,
  5. Kenjo, T., Sugawara, A., “Stepping motors and their microprocessor controls”, 2.ed., Oxford University Press, England (1994).
  6. Acarnley, P., Stepping motors: “A guide to theory and practice”, IEE Control Engineering Series 63, 4.ed., The Institution of Electrical Engineers, London (2002). [6] Rogers, D.F., Adams, J.A., “Mathematical Elements for Computer Graphics”, 2.ed., McGraw- Hill Publication Company, New York (1990).