Journals / Gazi University Journal of Science / 2020 / Volume: 33 Issue: 4

Failure Analysis of a Drop Tested Wall-Mounted Air Conditioner Indoor Unit: Simulation and Experimental Analysis

Paşa Yayla(Marmara University)0000-0002-1787-9475
Mehmet Fazlı Tekneci(Turkish Airlines Technic INC)
Pages
—
Publication Date
2020-12-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The approach presented with this work can be a reference guide for assessing the dynamic response of impact sensitive home and industrials applicants.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Dynamic behavior of a wall-mounted air conditioner indoor unit is analyzed under drop impact condition.
📊
Key Findings & Data:Physical drop tests are performed according to ASTM D5276 and ASTM D880 standards and strain gauges are used to measure the effective strains by attaching to specific areas subjected to excessive deformation.
💡
Conclusion & Impact:The approach presented with this work can be a reference guide for assessing the dynamic response of impact sensitive home and industrials applicants.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Drop test · Failure analysis

Abstract

Dynamic behavior of a wall-mounted air conditioner indoor unit is analyzed under drop impact condition. For simulation analysis, a finite element analysis code, known as Ansys Autodyn, is used. Physical drop tests are performed according to ASTM D5276 and ASTM D880 standards and strain gauges are used to measure the effective strains by attaching to specific areas subjected to excessive deformation. By recording drop test with high speed camera, the impact contact duration is also detected. By comparing experimental and numerical results, the validation of finite element analysis is performed. Product improvements are made for the damaged areas and validated by drop test. Conducting physical drop tests with strain gauges together with finite element analysis decreases product development lead time, reduces development costs and eliminates the product’s potential risks in advance. The approach presented with this work can be a reference guide for assessing the dynamic response of impact sensitive home and industrials applicants.

🔖

Cite This Article

Yayla, P., Tekneci, M. F. (2020). Failure Analysis of a Drop Tested Wall-Mounted Air Conditioner Indoor Unit: Simulation and Experimental Analysis. Gazi University Journal of Science, Volume: 33 Issue: 4. https://doi.org/10.35378/gujs.673742

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (19)

  1. ASTM D5276 (1998). Standard test method for drop test of loaded containers by free fall. American Society for Testing and Materials, West Conshohocken, PA, USA
  2. ASTM D880 (2002). Standard test method for impact testing for shipping containers and systems. American Society for Testing and Materials, West Conshohocken, PA, USA
  3. Asa, T., “Modelling the drop test of household oven with finite element method”. MSc Thesis, Istanbul Technical Univ., Istanbul, Turkey, 2015
  4. Kim, W.J., Lee, B.Y., Son, B.S., “Drop-impact analysis and design of a package of a microwave oven”, Trans. Korean Soc. Mech. Eng., 33 (2009) 536-543
  5. Kim, C.S., Bae, B.K., Sung, D.Y., “Drop analysis of a package and cushion performance of drum washing machine”, Trans. Korean Soc. Mech. Eng., 34 (2010), 1733-1740
  6. Mulkoglu, O., Guler, M.A., Demirbag, H., “Drop test simulation and verification of a dishwasher mechanical structure”, Tenth European LS-DYNA Conference, Würzburg, Germany, 2015
  7. Eraslan, S., “Modeling and drop test analysis of the built-in dish washer”, MSc Thesis, Istanbul Technical Univ., Istanbul, Turkey, 2015
  8. Hong, S., Choi, Y.C., Eom, S.U., Kim, H.L., Hyun, H.C., “Finite element analysis of dynamic deformation of refrigerator’s lower hinge during drop test”, Trans. Korean Soc. Mech. Eng., 3 (2015) 37-44, 2015
  9. Oh, W., Lim, S., Park, K.S., Park, N.C., Park, Y.P., Lee, J.S., Lee, H.B., “Design of modified shock isolators for the optical pickup in an ADD by analytical and experimental Methods”, Microsystem Technol. 19 (2013) 1615-1623
  10. Lee, Y., Jung, U.J., Park, G.J., Han, I.S., Kim, T.K., “Optimization of the television packing system using equivalent static loads” Trans. Korean Soc. Mech. Eng. 39 (2015) 311-318
  11. Low, K.H., Wang, Y., Hoon, K.H., Vahdati, N., “Initial global-local analysis for drop-impact effect study of TV products”, Advances in Engineering Software 35 (2004) 179–190
  12. Yeh, M.K., Huang, T.H., “Drop test and finite element analysis of test board”, Procedia Engineering, 79 (2014) 238-243
  13. Zhou, C.Y., Yu, T.X., Lee, R.S.W., “Drop/impact tests and analysis of typical portable electronic devices”, International Journal of Mechanical Sciences, 50 (2008) 905–917
  14. Lacroix, C., Safran, G., “Modelisation of screen rupture during a mobile phone free fall”, Sixth European LS-DYNA Conference, Gothenburg, Germany, 2007
  15. Wu, I.C., Wang, M. H., Jang, L.S., “Experimental location of damage in microelectronic solder joints after a board level reliability evaluation”, Engineering Failure Analysis, 83 (2018) 131-140
  16. ABS XG570, http://www.lgchem.com.tr/products/01122012-143947-astm-abs-xg570_eng.pdf, Access date: 10.01.2020
  17. BASF Inc., Packaging with Strafor, Access address: http://styropor.basf.us/files/pdf/Packaging_with_Styropor.pdf, Access date:: 10.01.2020
  18. Wu, I.C., Wang, M. H., Jang, L.S., “Experimental location of damage in microelectronic solder joints after a board level reliability evaluation”, Engineering Failure Analysis, 83 (2018) 131-140
  19. ABS XG570, http://www.lgchem.com.tr/products/01122012-143947-astm-abs-xg570_eng.pdf, Access date: 10.01.2020