SavedAdd your journal

Journals / Gazi University Journal of Science / 2026 / Volume: 39 Issue: 3

3D Concrete Printing for Façade Retrofitting: A Parametric Approach to Thermal and Indoor Acoustic Performance in a Residential Unit

Çağatay Takva(GAZI UNIVERSITY)0000-0002-0494-9972
Sena Nur Öz(GAZI UNIVERSITY)0009-0006-6785-9794
Hüseyin İlcan(HACETTEPE UNIVERSITY)0000-0002-7853-1907
Zeynep Yeşim İlerisoy(GAZI UNIVERSITY)0000-0003-1903-9119
Mustafa Şahmaran(HACETTEPE UNIVERSITY)0000-0002-7549-096X
Pages
—
Publication Date
2026-09-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results demonstrate that 3DCP facade panels constitute a viable, multi-functional retrofit layer that simultaneously enhances thermal performance, interior acoustics, and architectural expression through a single intervention, offering a replicable methodology for performance-driven envelope renewal in the existing building stock .

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A large share of the existing residential stock, particularly in countries that adopted mandatory thermal insulation codes relatively late, exhibits simultaneously poor thermal and acoustic performance.
📊
Key Findings & Data:Although 3D Concrete Printing (3DCP) technology has been independently studied for thermal and acoustic applications, the potential to combine these two applications in a facade system constitutes a research gap.
💡
Conclusion & Impact:The results demonstrate that 3DCP facade panels constitute a viable, multi-functional retrofit layer that simultaneously enhances thermal performance, interior acoustics, and architectural expression through a single intervention, offering a replicable methodology for performance-driven envelope renewal in the existing building stock .
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:3D concrete printing · Facade retrofitting · Thermal performance

Abstract

A large share of the existing residential stock, particularly in countries that adopted mandatory thermal insulation codes relatively late, exhibits simultaneously poor thermal and acoustic performance. Although 3D Concrete Printing (3DCP) technology has been independently studied for thermal and acoustic applications, the potential to combine these two applications in a facade system constitutes a research gap. This study presents a case-study application of prefabricated 3DCP cladding panels, featuring a ribbed, geometrically complex surface texture, to the facade of a 50 m² precast Reinforced Concrete (RC) residential unit in Ankara, Türkiye, without major structural intervention. The facade panels are manufactured from geopolymer material based on Construction and Demolition Waste (CDW). A parametric workflow integrating Autodesk Revit with Dynamo-based Sabine acoustic analysis and an ISO 6946 DesignBuilder thermal simulation pipeline is employed to quantify pre- and post-retrofit performance. The 3DCP cladding reduces the composite wall U-value from 0.714 to 0.346 W/m²K (−51.5%) and lowers the mid-frequency reverberation time (RT60) from 1.54 s to 0.88 s (−42.9%), while the existing single-glazed windows are retained as a fixed boundary condition. A diagnostic sub-analysis isolates the acoustic contribution of the unchanged glazing, confirming that the 3DCP surface texture is the dominant driver of absorption improvement. The results demonstrate that 3DCP facade panels constitute a viable, multi-functional retrofit layer that simultaneously enhances thermal performance, interior acoustics, and architectural expression through a single intervention, offering a replicable methodology for performance-driven envelope renewal in the existing building stock .

🔖

Cite This Article

Takva, Ç., Öz, S. N., İlcan, H., İlerisoy, Z. Y., Şahmaran, M. (2026). 3D Concrete Printing for Façade Retrofitting: A Parametric Approach to Thermal and Indoor Acoustic Performance in a Residential Unit. Gazi University Journal of Science, Volume: 39 Issue: 3. https://doi.org/10.35378/gujs.1937791

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (41)

  1. Awan, A., Kocoglu, M., Subhan, M., Utepkaliyeva, K., and Hossain, M.E., ‘‘Assessing energy efficiency in the built environment: A quantile regression analysis of CO2 emissions from buildings and manufacturing sector’’, Energy and Buildings, 338: 115733, (2025). DOI: https://doi.org/10.1016/j.enbuild.2025.115733
  2. Pessoa, S., Guimarães, A.S., Lucas, S.S., and Simões, N., ‘‘3D printing in the construction industry-A systematic review of the thermal performance in buildings’’, Renewable and Sustainable Energy Reviews, 141: 110794, (2021). DOI: https://doi.org/10.1016/j.rser.2021.110794
  3. Nemova, D., Kotov, E., Andreeva, D., Khorobrov, S., Olshevskiy, V., Vasileva, I., Zaborova, D., and Musorina, T., ‘‘Experimental study on the thermal performance of 3D-printed enclosing structures’’, Energies, 15: 4230, (2022). DOI: https://doi.org/10.3390/en15124230
  4. Edelenbosch, O. Y., Rovelli, D., Levesque, A., Marangoni, G., and Tavoni, M., ‘‘Long term, cross-country effects of buildings insulation policies’’, Technological Forecasting and Social Change, 170: 120887, (2021). DOI: https://doi.org/10.1016/j.techfore.2021.120887
  5. Churkina, G., Organschi, A., Reyer, C. P. O., Ruff, A., Vinke, K., Liu, Z., Reck, B. K., Graedel, T. E., and Schellnhuber, H. J., ‘‘Buildings as a global carbon sink’’, Nature Sustainability, 3: 269–276, (2020). DOI: https://doi.org/10.1038/s41893-019-0462-4
  6. Liu, C., Sharples, S., and Mohammadpourkarbasi, H., ‘‘A review of building energy retrofit measures, passive design strategies and building regulation for the low carbon development of existing dwellings in the hot summer–cold winter region of China’’, Energies, 16(10): 4115, (2023). DOI: https://doi.org/10.3390/en16104115
  7. Iavorschi, E., Milici, L. D., Ifrim, V. C., Ungureanu, C., and Bejenar, C., ‘‘A literature review on the European legislative framework for energy efficiency, nearly zero-energy buildings (nZEB), and the promotion of renewable electricity generation’’, Energies, 18(6): 1436, (2025). DOI: https://doi.org/10.3390/en18061436
  8. Procaccini, G., Prieto, A., Knaack, U., Monticelli, C., and Konstantinou, T., ‘‘Textile membrane for façade retrofitting: Exploring fabric potentialities for the development of innovative strategies’’, Buildings, 14(1): 86, (2023). DOI: https://doi.org/10.3390/buildings14010086
  9. Jabłońska, J., Teleska, M., Adamska, A., and Gronostajska, J., ‘‘The architectural typology of contemporary façades for public buildings in the European context’’, Arts, 11(1): 11, (2022). DOI: https://doi.org/10.3390/arts11010011
  10. Streicher, K. N., Mennel, S., Chambers, J., Parra, D., and Patel, M. K., ‘‘Cost-effectiveness of large-scale deep energy retrofit packages for residential buildings under different economic assessment approaches’’, Energy and Buildings, 215: 109870, (2020). DOI: https://doi.org/10.1016/j.enbuild.2020.109870
  11. Procaccini, G., and Monticelli, C., ‘‘Building façade retrofit: A comparison between current methodologies and innovative membranes strategies for overcoming the existing retrofit constraints’’, In International Conference on Technological Imagination in the Green and Digital Transition, Springer International Publishing, 735-744, (2022). DOI: https://doi.org/10.1007/978-3-031-29515-7_66
  12. Yang, S., Yi, W., and Zong, H., ‘‘A systematic review of retrofitting buildings for sustainability from a lifecycle perspective’’, Sustainable Cities and Society, 106702, (2025). DOI: https://doi.org/10.1016/j.scs.2025.106702
  13. Baraboi, D. R., Scutaru, L. M., Dragomir, G., Brezeanu, A. I., Calotă, R., Pavel, M., and Năstase, G., ‘‘Smart 3D-printed facades: a review of innovations, materials, and sustainable performance’’, Frontiers in Sustainable Cities, 7: 1610729, (2025). DOI: https://doi.org/10.3389/frsc.2025.1610729
  14. Ezz, M. S., Odah, E., Baharetha, S., Al Sayed, A. A. K. A., and Salem, D. A., ‘‘Analytical examination of dynamic elements in modern architectural facades for advanced structural aesthetics’’, Frontiers in Built Environment, 10: 1302380, (2024). DOI: https://doi.org/10.3389/fbuil.2024.1302380
  15. Akgün, Y., Erkarslan, Ö. E., and Kavuncuoğlu, C., ‘‘Tectonics of kinetic architecture: Moving envelope, changing space and the shades of the shed’’, Frontiers in Built Environment, 8: 1006300, (2022). DOI: https://doi.org/10.3389/fbuil.2022.1006300
  16. Azeem, M., Amor, N., Kashif, M., Tabassum, W. A., and Noman, M. T., ‘‘A systems approach to thermal bridging for a net zero housing retrofit: United Kingdom’s perspective’’, Sustainability, 17(24): 11325, (2025). DOI: https://doi.org/10.3390/su172411325
  17. Sarihi, S., Saradj, F. M., and Faizi, M., ‘‘A critical review of façade retrofit measures for minimizing heating and cooling demand in existing buildings’’, Sustainable Cities and Society, 64: 102525, (2021). DOI: https://doi.org/10.1016/j.scs.2020.102525
  18. Brito-Coimbra, S., and Aelenei, D., Gloria Gomes, M., Moret Rodrigues, A., ‘‘Building façade retrofit with solar passive technologies: A literature review’’, Energies, 14(6): 1774, (2021). DOI: https://doi.org/10.3390/en14061774
  19. Qi, S., Utaberta, N., Kiet, A. L. K., Yanfang, X., and Xiyao, H., ‘‘Effects of green façade retrofitting on thermal performance and energy efficiency of existing buildings in northern China: An experimental study’’, Energy and Buildings, 335, 115550, (2025). DOI: https://doi.org/10.1016/j.enbuild.2025.115550
  20. Nair, G., Verde, L., and Olofsson, T., ‘‘A review on technical challenges and possibilities on energy efficient retrofit measures in heritage buildings’’, Energies, 15(20): 7472, (2022). DOI: https://doi.org/10.3390/en15207472
  21. Cuce, P. M., ‘‘Sustainable insulation technologies for low-carbon buildings: From past to present’’, Sustainability, 17(11): 5176, (2025). DOI: https://doi.org/10.3390/su17115176
  22. Barreira, E., and de Freitas, V. P., ‘‘External thermal insulation composite systems: Critical parameters for surface hygrothermal behaviour’’, Advances in Materials Science and Engineering, 2014(1): 650752, (2014). DOI: https://doi.org/10.1155/2014/650752
  23. Parracha, J. L., Veiga, R., Flores-Colen, I., and Nunes, L., ‘‘Toward the sustainable and efficient use of External Thermal Insulation Composite Systems (ETICS): a comprehensive review of anomalies, performance parameters, requirements and durability’’, Buildings, 13(7): 1664, (2023). DOI: https://doi.org/10.3390/buildings13071664
  24. Das, P. P., Chaudhary, V., Ahmad, F., Manral, A., Gupta, S., and Gupta, P., ‘‘Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications’’, Polymer Composites, 43(3): 1221-1237, (2022). DOI: https://doi.org/10.1002/pc.26455
  25. Korjakins, A., Sahmenko, G., and Lapkovskis, V., ‘‘A short review of recent innovations in Acoustic materials and panel design: emphasizing wood composites for enhanced performance and sustainability’’, Applied Sciences, 15(9): 4644, (2025). DOI: https://doi.org/10.3390/app15094644
  26. Buswell, R. A., De Silva, W. L., Jones, S. Z., and Dirrenberger, J., ‘‘3D printing using concrete extrusion: A roadmap for research’’, Cement and concrete research, 112: 37-49, (2018). DOI: https://doi.org/10.1016/j.cemconres.2018.05.006
  27. Hassan, H., Rodriguez-Ubinas, E., Al Tamimi, A., Trepci, E., Mansouri, A., and Almehairbi, K., ‘‘Towards innovative and sustainable buildings: A comprehensive review of 3D printing in construction’’, Automation in Construction, 163: 105417, (2024). DOI: https://doi.org/10.1016/j.autcon.2024.105417
  28. Marais, H., Christen, H., Cho, S., De Villiers, W., and Van Zijl, G., ‘‘Computational assessment of thermal performance of 3D printed concrete wall structures with cavities’’, Journal of Building Engineering, 41: 102431, (2021). DOI: https://doi.org/10.1016/j.jobe.2021.102431
  29. Tamimi, A. A., Hassan, H., Rodriguez-Ubinas, E., Alhaidary, H., and Mansouri, A., ‘‘Thermal performance of 3D concrete printed walls: Calculated and in-situ measured U-values’’, Journal of Asian Architecture and Building Engineering, 23(6): 1903-1915, (2024). DOI: https://doi.org/10.1080/13467581.2023.2278467
  30. de Rubeis, T., Ciccozzi, A., Giusti, L., and Ambrosini, D., ‘‘On the use of 3D printing to enhance the thermal performance of building envelope–A review’’, Journal of Building Engineering, 95: 110284, (2024). DOI: https://doi.org/10.1016/j.jobe.2024.110284
  31. Setaki, F., Tian, F., Turrin, M., Tenpierik, M., Nijs, L., and Van Timmeren, A., ‘‘3D-printed sound absorbers: Compact and customisable at broadband frequencies’’, Architecture, Structures and Construction, 3(2): 205-215, (2023). DOI: https://doi.org/10.1007/s44150-023-00086-9
  32. Li, X., Chua, J. W., Yu, X., Li, Z., Zhao, M., Wang, Z., and Zhai, W., ‘‘3D‐printed lattice structures for sound absorption: current progress, mechanisms and models, structural‐property relationships, and future outlook’’, Advanced Science, 11(4): 2305232, (2024). DOI: https://doi.org/10.1002/advs.202305232
  33. Leschok, M., Cheibas, I., Piccioni, V., Seshadri, B., Schlüter, A., Gramazio, F., and Dillenburger, B., ‘‘3D printing facades: Design, fabrication, and assessment methods’’, Automation in Construction, 152: 104918, (2023). DOI: https://doi.org/10.1016/j.autcon.2023.104918
  34. Mishra, S. K., Snehal, K., Das, B. B., Chandrasekaran, R., and Barbhuiya, S., ‘‘From printing to performance: A review on 3D concrete printing processes, materials, and life cycle assessment’’, Journal of Building Pathology and Rehabilitation, 10(2): 117, (2025). DOI: https://doi.org/10.1007/s41024-025-00626-4
  35. Shen, W., Jiang, X., and Qin, H., ‘‘Acoustic absorption performance investigation in standard and custom infill patterns for FFF 3D printing with PLA material’’, Manufacturing Letters, 44: 1113-1122, (2025). DOI: https://doi.org/10.1016/j.mfglet.2025.06.131
  36. İlcan, H., Koca, E., Özçelikci, E., Sevim, Ö., Şahmaran, M., and Lachemi, M., ‘‘Circular binder design using CDW and conventional precursors: Engineering and environmental performance assessment’’, Environmental Research, 123350, (2025). DOI: https://doi.org/10.1016/j.envres.2025.123350
  37. İlerisoy, Z. Y., Takva, Ç., Top, S. M., Gökgöz, B. İ., Gebel, Ş., İlcan, H., and Şahmaran, M., ‘‘The effectiveness of 3D concrete printing technology in architectural design: Different corner-wall combinations in 3D printed elements and geometric form configurations in residential buildings’’, Architectural Science Review, 1-17, (2025). DOI: https://doi.org/10.1080/00038628.2025.2543003
  38. Shaqour, E. N., Alshafei, I. A., Abu Taqa, A., Senouci, A., and Hassan, A. M. S., ‘‘Energy simulation-based assessment of traditional and modern wall materials for thermal performance: A case study of a traditional house in Jordan’’, Energies, 18(20): 5336, (2025). DOI: https://doi.org/10.3390/en18205336
  39. Briels, D., Renz, M., Nouman, A. S., Straßer, A., Hechtl, M., Dahlenburg, M., and Auer, T., ‘‘Monolithic AM façade: Multi-objective parametric design optimization of additively manufactured insulating wall elements’’, Frontiers in Built Environment, 9: 1286933, (2023). DOI: https://doi.org/10.3389/fbuil.2023.1286933
  40. Binyaseen, A. M., ‘‘Improving thermal performance of existing uninsulated RC domes through passive cooling measures using polyurethane foam in double skin layer in hot climate’’, Case Studies in Construction Materials, 16: e00866, (2022). DOI: https://doi.org/10.1016/j.cscm.2021.e00866
  41. Ali, A., Issa, A., and Elshaer, A., ‘‘A comprehensive review and recent trends in thermal insulation materials for energy conservation in buildings’’, Sustainability, 16(20): 8782, (2024). DOI: https://doi.org/10.3390/su16208782