SavedAdd your journal

Journals / Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi / 2009 / Cilt: 25 Sayı: 1

HEAT TRANSFER IN A CROSS-FLOW HEAT RECOVERY VENTILATOR WITH FIN

KANATÇIKLI ÇAPRAZ AKIŞLI ISI GERİ KAZANIM VANTİLATÖRÜNDE ISI TRANSFERİ

Isak Kotcioglu
Sinan Caliskan
Muammer Zırzakıran
Pages
272–286
Publication Date
2009-02-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results obtained, the effectiveness of heat recovery ventilator (HRV) was calculated and discussed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a heat recovery ventilator was designed and constructed.
📊
Key Findings & Data:Experimental procedure consisted of measuring of supply and exhaust air outlet temperatures.
💡
Conclusion & Impact:According to the results obtained, the effectiveness of heat recovery ventilator (HRV) was calculated and discussed.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Isı geri kazanımı · Vantilatör · Çapraz akış

Abstract

In this study, a heat recovery ventilator was designed and constructed. Experimental procedure consisted of measuring of supply and exhaust air outlet temperatures. According to the results obtained, the effectiveness of heat recovery ventilator (HRV) was calculated and discussed. From the data including supply and exhaust air outlet temperatures obtained from this experimental work, the effectiveness of HRV was calculated for the several inlet flow conditions. In addition, variation of effectiveness ( ε ) with the number of transfer units (NTU) of heat recovery unit was calculated

Özet

Bu çalışmada, bir ısı geri kazanım sistemi tasarlandı ve imal edildi. Deneysel işlem egzoz ve taze hava sıcaklıklarının ölçümlerinden oluşmaktadır. Elde edilen sonuçlara göre ısı geri kazanım ventilatörünün etkenliği hesaplandı ve tartışıldı. Bu deneysel çalışmadan toplanan egzoz ve taze hava akışının çıkış sıcaklık verileri ve HRV nin etkenliği birçok giriş akış şartları için hesaplandı. İlave olarak etkenliğin ısı geri kazanım sisteminin NTU değeri ile değişimi hesaplandı.

🔖

Cite This Article

Kotcioglu, I., Caliskan, S., Zırzakıran, M. (2009). HEAT TRANSFER IN A CROSS-FLOW HEAT RECOVERY VENTILATOR WITH FIN. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi, Cilt: 25 Sayı: 1, 272–286. https://ajindex.com/articles/1267280

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Bergles A.E., Enhancement of Heat Transfer, Int.J.Heat Transfer, 6, 89-168, 1978.
  2. Bergles A.E., Augmentation of Heat Transfer, Heat Exchanger Design Handbook.2, Hemisphere Washington B.C. 1983.
  3. Mendes P.S., Sparrow E.M., Periodically Converging – Diverging Tubes and Their Turbulent Heat Transfer, Pressure Drop, Fluid Flow and Enhancement Characteristics, Int. J. Heat Transfer, 106, 55- 63, 1984.
  4. Kays W.M., London A.L., Compact Heat exchangers, third ed., McGraw-Hill, New York, 1984.
  5. Kotcioglu I, Caliskan S., Experimental Investigation of a Cross Flow Heat Exchanger with Wing -Type Vortex Generators, Journal of Enhanced Heat Transfer, 15, 2, 113-127, 2008.
  6. Bergles A.E., Heat transfer enhancement-the encouragement and accommodation of high heat fluxes J. Heat Transfer (Trans. ASME), 119, 8–19, 1997.
  7. Konak I., A Master Thesis in Mechanical Engineering the University of Gaziantep, An Experimental Study on Heat Recovery Ventilator, 2001.
  8. Soylemez M.S., On the optimum heat exchanger sizing for heat recovery, Energy Conversion & Management, 41,1419 -27, 2000.
  9. Sohankar A., Heat transfer augmentation in a rectangular channel with a vee-shaped vortex generator, International Journal of Heat and Fluid Flow, 28, 306-17, 2007.
  10. Kotcioglu I., Ayhan T., Olgun H., Ayhan B., Heat Transfer and Flow Structure in a Rectangular Channel with Wing-Type Vortex Generator, Tr.J.of Engineering and Environmental Science TUBITAK, 22, 185-95, 1998.
  11. Mendes P.S., Sparrow E.M., Periodically Converging – Diverging Tubes and Their Turbulent Heat Transfer, Pressure Drop, Fluid Flow and Enhancement Characteristics, Int. J. Heat Transfer, 106, 55- 63, 1984.
  12. Sohankar A., Heat transfer augmentation in a rectangular channel with a vee-shaped vortex generator, International Journal of Heat and Fluid Flow, 28, 306-17, 2007.