SavedAdd your journal

Journals / Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2018 / Cilt: 20 Sayı: 2

Investigation of fracture properties of cord fabric reinforced polyester composites

Kord bezi ile takviye edilmiş polyester kompozitlerin kırılma özelliklerinin incelenmesi

İlyas Kartal0000-0001-9677-477X
Pages
396–400
Publication Date
2018-12-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the increase in fiber ratio resulted in a great increase in mechanical properties and that orthogonal reinforced composite had superior mechanical properties when compared with unidirectionally reinforced composites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, thermoset composite materials reinforced with cord fabric were prepared at different rates.
📊
Key Findings & Data:The preparation of unidirectionally and orthogonally reinforced polyester matrix based composite materials by hand lay-up method and the fracture characteristics according to fiber ratio / orientation change were examined.
💡
Conclusion & Impact:The results showed that the increase in fiber ratio resulted in a great increase in mechanical properties and that orthogonal reinforced composite had superior mechanical properties when compared with unidirectionally reinforced composites.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Kord bezi · Polyester · kırılma

Abstract

In this study, thermoset composite materials reinforced with cord fabric were prepared at different rates. The preparation of unidirectionally and orthogonally reinforced polyester matrix based composite materials by hand lay-up method and the fracture characteristics according to fiber ratio / orientation change were examined. The results showed that the increase in fiber ratio resulted in a great increase in mechanical properties and that orthogonal reinforced composite had superior mechanical properties when compared with unidirectionally reinforced composites.

Özet

Bu çalışmada farklı oranlarda kord bezi ile takviye edilmiş termoset kompozit malzemeler hazırlanmıştır. Tek yönlü ve ortogonal olarak takviye edilmiş polyester matris esaslı kompozit malzemenin elle yatırma yöntemi ile hazırlanması ve lif oranındaki değişim/yönlenmedeki değişime göre kırılma özellikleri incelenmiştir. Sonuçlar lif oranının artmasıyla mekanik özelliklerde büyük bir artış sağlamış, ortogonal olarak takviyelendirilmiş kompozitlerin tek yönlü olarak takviyelendirilmiş kompozitlerle kıyaslandığında daha üstün mekanik özelliklere sahip olduğunu gösterdi.

🔖

Cite This Article

Kartal, İ. (2018). Investigation of fracture properties of cord fabric reinforced polyester composites. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 20 Sayı: 2, 396–400. https://doi.org/10.25092/baunfbed.468557

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Miravete, A., 3-D Textile reinforcements in composite materials, Woodhead Publishing (1999)
  2. Ratna, D., Handbook of Thermoset Resins, Smithers Rapra, (2009)
  3. Kartal İ., Boztoprak, Y. ve Çakır, M., Cam kürecik takviyeli polyester kompozit malzemenin kırılma morfolojisinin incelenmesi, 18. Ulusal Elektron Mikroskopi Kongresi, (2007)
  4. Gay, D., Hoa, S.V. ve Tsai, S.W., Composite materials design and applications, CRC Press, (2003)
  5. Mazumdar, S.K., Composites manufacturing materials, product, and process engineering, CRC Press, (2002)
  6. Suong V.H., Principles of the manufacturing of composite materials, Destech Publications, (2009)
  7. Çakır, M., Kartal, İ., Demirer, H. ve Taşyürek, Ş., Akrilik elyaf takviyeli polyester kompozitlerin mekanik özelliklerinin incelenmesi, 6. Uluslararası İleri Teknolojiler Sempozyumu, (2011)
  8. Luo, Y., Lihua, L.V., Sun, B., Qiu, Y. ve Gu, B., Transverse impact behavior and energy absorption of three-dimensional orthogonal hybrid woven composites, 81(2), Composite Structures, (2007)