Journals / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2019 / Cilt: 12 Sayı: 2

Hot Corrosion Behaviour of MCrAlY Based Coatings Fabricated by High Velocity Oxy-Fuel

Yüksek Hızlı Oksi- Yakıt Püskürtme Tekniği ile Üretilmiş MCrAlY Esaslı Kaplamaların Sıcak Korozyon Davranışı

Yılmaz Yalçın(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)
Ramazan Tuncer(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)
Muhammet Karabaş(HAKKARİ ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)
Yusuf Kayalı(AFYON KOCATEPE ÜNİVERSİTESİ, TEKNOLOJİ FAKÜLTESİ)
Pages
1174–1188
Publication Date
2019-08-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The formation of various metal vanadate corrosion products at 600 and 700 ºC temperature was determined.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, ductile cast irons (DCI) were coated with two different AMDRY 9624 Ni based and AMDRY 9951 Ni-Co based materials by HVOF method.
📊
Key Findings & Data:Hot corrosion behavior of DCI are investigated by using %50 V 2 O 5 + %50 Na 2 SO 4 salts.
💡
Conclusion & Impact:The formation of various metal vanadate corrosion products at 600 and 700 ºC temperature was determined.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Sıcak Korozyon · HVOF · Kaplama

Abstract

In this study, ductile cast irons (DCI) were coated with two different AMDRY 9624 Ni based and AMDRY 9951 Ni-Co based materials by HVOF method. Microstructure and phase analyzes of the coatings were performed to by using Scaning electron microscopy equipped with Energy-dispersive X-ray spectroscopy (SEM-EDX) and X-Ray difraction (XRD) methods. Hot corrosion behavior of DCI are investigated by using %50 V 2 O 5 + %50 Na 2 SO 4 salts. As a result of the characterization studies it was observed that a dense non-porous coating layer of about 80 μm thickness was obtained on the cast iron samples and continuous adhesion was provided between the coating and the substrate. It has been determined that the cast iron coated with AMDRY 9624 contains γ and β intermetallic phases and the coating produced with AMDRY 9951 commercial powder containsonly γ phase. After the hot corrosion tests, The characterization studies reveal that the reaction of the cast iron substrate with corrosive salts resulted in the formation of FeVO 4 corrosion product at all three temperatures. After coating application, no metal vanadate compound was formed by the reaction of salts with the coatings at 500 ºC. The formation of various metal vanadate corrosion products at 600 and 700 ºC temperature was determined.

Özet

Bu çalışmada küresel grafitli dökme demir (KGDD) altlıklar Yüksek Hızlı Oksi-Yakıt (HVOF) yöntemi ile Ni esaslı AMDRY 9624 ve Ni-Co esaslı AMDRY 9951 olmak üzere iki farklı malzeme ile kaplanmıştır. Kaplamaların mikroyapı ve faz analizleri enerji dağılımlı X-Ray spektrometreli taramalı elektron mikroskobu (SEM-EDX) ve X ışınları difraksiyonu (XRD) yöntemleri kullanılarak yapılmıştır. Bu kaplamaların, %50 V 2 O 5 + %50 Na 2 SO 4 korozif tuz karışımından oluşan ortamda ve üç farklı sıcaklıkta sıcak korozyon davranışları incelenmiştir. Karakterizasyon çalışmaları neticesinde dökme demir altlıklar üzerinde yaklaşık 80 µm kalınlığında yoğun, porozitesiz bir kaplama tabakası elde edildiği ve kaplama ile altlık malzeme arasında sürekli yapışma sağlandığı görülmüştür. AMDRY 9624 ile kaplanan dökme demirlerin γ ve β intermetalik fazlarını ihtiva ettiği, AMDRY 9951 ticari toz ile üretilen kaplamanın ise sadece γ fazını ihtiva ettiği tespit edilmiştir. Sıcak korozyon testleri sonrasında dökme demir altlığın korozyon tuzlarıyla reaksiyonu sonucu üç sıcaklıkta da FeVO 4 korozyon ürünü oluşmuştur. Kaplama uygulaması sonrası ise 500 ºC de tuzların etkisi ile herhangi bir metal vanadat bileşiği oluşmazken, 600 ve 700 ºC sıcaklıkta çeşitli metal vanadat korozyon ürünlerinin oluşumu belirlenmiştir.

🔖

Cite This Article

Yalçın, Y., Tuncer, R., Karabaş, M., Kayalı, Y. (2019). Hot Corrosion Behaviour of MCrAlY Based Coatings Fabricated by High Velocity Oxy-Fuel. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 12 Sayı: 2, 1174–1188. https://ajindex.com/articles/1246344

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. Cheng, X., Hu, S. B., Song, W. L., & Xiong, X. S. (2013). Improvement in corrosion resistance of a nodular cast iron surface modified by plasma beam treatment. Applied Surface Science, 286, 334-343. doi:10.1016/j.apsusc.2013.09.083
  2. Davis, J. R. (2004). Handbook of Thermal Spray Technology. ASM International, 338.
  3. Dudziak, T., Du, H. L., Datta, P. K., Wilson, A., Ross, I. M., Moser, M., & Braun, R. (2009). Sulphidation/oxidation behaviour of TiAlCr and Al2Au coated Ti45Al8Nb alloy at 750 degrees C. Corrosion Science, 51(5), 1189-1196. doi:10.1016/j.corsci.2009.02.015
  4. El-Kashif, E., El-Banna, E., & Riad, S. (2003). Stepped austempering of GGG 40 ductile cast iron. ISIJ international, 43(7), 1056-1062.
  5. Faizul Idham, M. A., Bulan & Syarif, Junaidi & Jaffar, Ahmed & Alias, Siti & Saad, Nor. (2003). Microstructure and XRD of Ductile Iron Using Annealing-Tempering Heat Treatment Process. Applied Mechanics and Materials, 393, 83-87.
  6. Fauchais, P., & Vardelle, A. (2012). Thermal sprayed coatings used against corrosion and corrosive wear. In Advanced plasma spray applications: InTech.
  7. Fernandes, F., Cavaleiro, A., & Loureiro, A. (2012). Oxidation behavior of Ni-based coatings deposited by PTA on gray cast iron. Surface & Coatings Technology, 207, 196-203. doi:10.1016/j.surfcoat.2012.06.070
  8. Grewal, P. S., Chawla, V., & Grewal, J. S. (2011). High Velocity Oxy-fuel Sprayed Coatings- a Review. Journal of the Australian Ceramic Society, 47(2), 30-36.
  9. Huang, Z. W., Wang, Z. G., Zhu, S. J., Yuan, F. H., & Wang, F. G. (2008). Effect of HVOF sprayed MCrAIY coating on thermomechanical and isothermal fatigue life of superalloy M963. Surface Engineering (Icse 2007), 373-374, 23-+. doi:DOI 10.4028/www.scientific.net/KEM.373-374.23
  10. Itoh, Y., Saitoh, M., & Tamura, M. (2000). Characteristics of MCrAIY coatings sprayed by high velocity oxygen-fuel spraying system. Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 122(1), 43-49. doi:Doi 10.1115/1.483173
  11. Jegadeeswaran, N., Ramesh, M., & Bhat, K. U. (2013). Combating Corrosion Degradation of Turbine Materials Using HVOF Sprayed 25%(Cr 3 C 2-25 (Ni20Cr))+ NiCrAlY Coating. International Journal of Corrosion.
  12. Joshi, S. V., & Sivakumar, R. (1991). Particle Behavior during High-Velocity Oxy Fuel Spraying. Surface & Coatings Technology, 50(1), 67-74. doi:Doi 10.1016/0257-8972(91)90195-3
  13. Koutsky, J. (2004). High Velocity Oxy-Fuel spraying. Journal of Materials Processing Technology, 157, 557-560. doi:10.1016/j.jmatprotec.2004.07.114
  14. Lestan, Z., Milfelner, M., Balic, J., Brezocnik, M., & Karabegovic, I. (2013). Laser deposition of Metco 15E, Colmony 88 and VIM CRU 20 powders on cast iron and low carbon steel. International Journal of Advanced Manufacturing Technology, 66(9-12), 2023-2028. doi:10.1007/s00170-012-4478-4
  15. Liu, J. L., Shi, G. Q., Ding, P. D., Ye, H., & Ou, Z. X. (1997). Features of laser alloying of grey cast iron. Lasers in Engineering, 6(2), 81-101.
  16. Maco, A. L., & Belzunce, F. J. (1998). Laser surface hardening of gray cast irons. Revista De Metalurgia, 34(2), 126-130. doi:DOI 10.3989/revmetalm.1998.v34.i2.674
  17. Montero, X., & Galetz, M. C. (2018). Sulfate–Vanadate-Induced Corrosion of Different Alloys. Oxidation of Metals, 89(3), 499-516. doi:10.1007/s11085-017-9831-4
  18. O'Rourke, R. (2001). Cast iron: The engineered metal. Advanced Materials & Processes, 159(1), 65-68.
  19. Ocelik, V., de Oliveira, U., de Boer, M., & de Hosson, J. T. M. (2007). Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties. Surface & Coatings Technology, 201(12), 5875-5883. doi:10.1016/j.surfcoat.2006.10.044
  20. Saeidi, S., Voisey, K. T., & McCartney, D. G. (2009). The Effect of Heat Treatment on the Oxidation Behavior of HVOF and VPS CoNiCrAlY Coatings. Journal of Thermal Spray Technology, 18(2), 209-216.
  21. Saeidi, S., Voisey, K. T., & McCartney, D. G. (2011). Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings. Journal of Thermal Spray Technology, 20(6), 1231-1243.
  22. Seiersten, M., & Kofstad, P. (1987). Sodium Vanadate-Induced Corrosion of Nickel and Mcraiy Coatings on Inconel-600. Materials Science and Technology, 3(7), 576-583. doi:Doi 10.1080/02670836.1987.11782270
  23. Seo, D., & Ogawa, K. (2012). Isothermal Oxidation Behavior of Plasma Sprayed MCrAlY Coatings. In Advanced Plasma Spray Applications: InTech.
  24. Shibata, M., Kuroda, S., Watanabe, M., & Sakamoto, Y. (2006). Oxidation property of CoNiCrAlY coatings prepared by various thermal spraying techniques. High-Temperature Oxidation and Corrosion 2005, 522-523, 339-344. doi:DOI 10.4028/www.scientific.net/MSF.522-523.339
  25. Singh, R. (2009). Cast Iron Metallurgy. Materials Performance, 48(9), 58-61.
  26. Taheri, M., Valefi, Z., & Zangeneh-Madar, K. (2012). Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings. Surface Engineering, 28(4), 266-272. doi:10.1179/1743294411Y.0000000024
  27. Vetter, J., Barbezat, G., Crummenauer, J., & Avissar, J. (2005). Surface treatment selections for automotive applications. Surface & Coatings Technology, 200(5-6), 1962-1968. doi:DOI 10.1016/j.surfcoat.2005.08.011
  28. Wright, I. G., & Pint, B. A. (2005). Bond coating issues in thermal barrier coatings for industrial gas turbines. Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy, 219(A2), 101-107. doi:10.1243/095765005x6836
  29. Yoganandh, J., Natarajan, S., & Babu, S. P. K. (2013). Erosion Behaviour of WC-Co-Cr Thermal Spray Coated Grey Cast Iron under Mining Environment. Transactions of the Indian Institute of Metals, 66(4), 437-443. doi:10.1007/s12666-013-0262-x