Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2003 / Cilt: 5 Sayı: 3

REMOVAL OF MICA AND HEAVY MINERALS FROM ALBITE OF MUĞLA-MILAS DISTRICT BY FLOTATION

MUĞLA–MİLAS BÖLGESİ ALBİT CEVHERİNDEN AĞIR MİNERALLERİN FLOTASYON İLE UZAKLAŞTIRILMASI

Pages
171–180
Publication Date
2003-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

After flotation, a high quality product assaying 0.025% TiO2, 0.029% Fe2O3 and 11.71% Na2O was obtained for requirements of the glass and ceramic industries.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study is concerned with the beneficiation of Mugla-Milas albit deposits by froth flotation.
📊
Key Findings & Data:Due to the fact that physical, chemical and grinding performance of samples of A and B districts were similar, samples collected were mixed equally and blended.
💡
Conclusion & Impact:After flotation, a high quality product assaying 0.025% TiO2, 0.029% Fe2O3 and 11.71% Na2O was obtained for requirements of the glass and ceramic industries.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Feldspat · Kuvars · Feldspat flotasyonu

Abstract

This study is concerned with the beneficiation of Mugla-Milas albit deposits by froth flotation. The representative samples labeled A and B used in the experiments were taken from two different areas. Due to the fact that physical, chemical and grinding performance of samples of A and B districts were similar, samples collected were mixed equally and blended. Samples ground to minus 180-micron size with closed circuit reached liberation point (90%). A flotation schema consisting of two consecutive steps was applied. The first stage was the cationic flotation of mica in an acidic circuit by using amines. The second stage was anionic flotation to remove of heavy minerals in an acidic circuit by using petroleum sulfonates. Na-feldspar sample containing 0.26% TiO2, 0.25% Fe2O3 and 10.4% Na2O was subjected to flotation tests to determine optimum flotation conditions. After flotation, a high quality product assaying 0.025% TiO2, 0.029% Fe2O3 and 11.71% Na2O was obtained for requirements of the glass and ceramic industries.

Özet

Bu çalışma Muğla-Milas albit cevherinin flotasyon ile değerlendirilmesini içermektedir. İki farklı bölgeden toplanan albit cevheri A ve B şeklinde kodlanmış olup, bu örneklerin öğütülebilirlikleri, fiziksel ve kimyasal özellikleri benzer olduğundan eşit oranda karıştırılarak harmanlanmıştır. Albit cevheri, empüritelerden %90 oranında serbestleştiği boyut olan 180 μm’ye kapalı devre olarak öğütülmüştür. İki kademeli flotasyon işleminde anyonik ve katyonik reaktifler kullanılmıştır. Birinci aşama, asidik ortamda katyonik reaktiflerle (amin asetat) mika flotasyonu, ikinci aşama ise anyonik reaktiflerle (petrolyum sülfonatlar) ağır mineral flotasyonu şeklindedir. Optimum flotasyon şartlarını belirlemek amacıyla %10.4 Na2O, %0.25 Fe2O3 ve %0.26 TiO2 içeren cevher flotasyon testlerine tabi tutulmuştur. Flotasyon işleminden sonra %0.025 TiO2, %0.029 Fe2O3 ve 11.71% Na2O içeren seramik ve cam endüstrisinin istediği özellikte yüksek kaliteli albit konsantresi elde etmek mümkün olmuştur.

🔖

Cite This Article

Seyrankaya, A. (2003). REMOVAL OF MICA AND HEAVY MINERALS FROM ALBITE OF MUĞLA-MILAS DISTRICT BY FLOTATION. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 5 Sayı: 3, 171–180. https://ajindex.com/articles/1204205

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...