SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2026 / Cilt: 26 Sayı: 76

The Mechanical and Durability Properties of Cement Mortars with Different Types of Fibers and Chemical Admixtures

Farklı Tip Lif ve Kimyasal Katkı İçeren Çimento Harçlarının Mekanik ve Dayanıklılık Özellikleri

Dilan Çankal(MANİSA CELÂL BAYAR ÜNİVERSİTESİ)0000-0002-8263-4167
Ali Uğur Öztürk(MANİSA CELÂL BAYAR ÜNİVERSİTESİ)0000-0003-1747-2576
Gökhan Kaplan(ATATÜRK ÜNİVERSİTESİ)0000-0001-6067-7337
Pages
98–104
Publication Date
2024-01-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Beside the positive results obtained in the mechanical properties, the effects of the fibers in the abrasion and acid resistance (10% hydrochloric acid solution during 30 days) have given positive results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Improving the mechanical and durability properties of cement-based materials such as concrete is very important.
📊
Key Findings & Data:Basalt and glass fibers were used instead of the aggregate in the mixture as 0.8 and 1% by weight.
💡
Conclusion & Impact:Beside the positive results obtained in the mechanical properties, the effects of the fibers in the abrasion and acid resistance (10% hydrochloric acid solution during 30 days) have given positive results.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Çimento harcı · Eğilme dayanımı · Durabilite

Abstract

Improving the mechanical and durability properties of cement-based materials such as concrete is very important. The use of fibers is a good alternative in cement-based materials production. This study investigated workability, some mechanical and durability properties of cement mortar in cooperation with glass and basalt fiber. Basalt and glass fibers were used instead of the aggregate in the mixture as 0.8 and 1% by weight. The compatibility of the polycarboxylate-based water reducer and the modified phosphonate-based water reducer as chemical admixtures in selected ratios and fibers was tested. Experiments were carried out after 7 and 28 days of water cure and the effect of the curing periods were also determined. Flexural strength values of basalt fiber reinforced samples in all sets were found to be more than glass fiber reinforced samples. However, high compressive strength are obtained in glass fiber reinforced samples. Beside the positive results obtained in the mechanical properties, the effects of the fibers in the abrasion and acid resistance (10% hydrochloric acid solution during 30 days) have given positive results.

Özet

Beton gibi çimento esaslı malzemelerin mekanik ve dayanıklılık özelliklerinin iyileştirilmesi çok önemlidir. Çimento esaslı malzeme üretiminde lif kullanımı önemli bir alternatiftir. Bu çalışmada, çimento harcında cam ve bazalt lifi kullanılarak işlenebilirlik, bazı mekanik ve dayanıklılık özellikleri incelenmiştir. Karışımda agrega yerine ağırlıkça %0,8 ve %1 oranında bazalt ve cam lifi kullanılmıştır. Ayrıca, polikarboksilat esaslı hiperakışkanlaştırıcı ve modifiye fosfonat esaslı süper akışkanlaştırıcının çeşitli oranlarda liflerle uyumluluğu test edilmiştir. 7 ve 28 günlük su küründen sonra deneyler yapılmış ve kür sürelerinin etkisi de belirlenmiştir. Bazalt lifi içerikli eğilme dayanımı değerleri, cam lifi içerikli numunelere göre daha fazla bulunmuştur. Ancak cam lifi içerikli numunelerde yüksek basınç dayanımı elde edilmiştir. Mekanik özelliklerde elde edilen olumlu sonuçların yanı sıra, liflerin aşınma ve asit direnci (30 gün boyunca %10 hidroklorik asit çözeltisi) üzerindeki etkileri de olumlu sonuçlar sağlamıştır.

🔖

Cite This Article

Çankal, D., Öztürk, A. U., Kaplan, G. (2024). The Mechanical and Durability Properties of Cement Mortars with Different Types of Fibers and Chemical Admixtures. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 26 Sayı: 76, 98–104. https://doi.org/10.21205/deufmd.2024267612

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (43)

  1. Labib, W.A. 2018. Fibre Reinforced Cement Composites. Cement Based Materials, 31. https://dx.doi.org/10.5772/intechopen.75102
  2. Dong, Z., Wu, G., Zhao, X.L., Zhu, H., Lian, J.L. 2020. The Durability of Seawater Sea-sand Concrete Beams Reinforced with Metal Bars or Non-Metal Bars in the Ocean Environment, Advances in Structural Engineering, 23(2), 334-347. https://doi.org/10.1177/1369433219870580
  3. Pradeep, P., Dhas, E.R. 2015. Characterization of Chemical and Physical Properties of Palm Fibers, Advances in Materials Science and Engineering: An International Journal (MSEJ), 2(4), 1-6. http://dx.doi.org/10.5121/msej.2015.2401
  4. Pereira, M.V., Fujiyama, R., Darwish, F., Alves, G.T. 2015. On the Strengthening of Cement Mortar by Natural Fibers, Materials Research, 18, 177-183. https://doi.org/10.1590/1516-1439.305314
  5. Iyer, P., Kenno, S.Y., Das, S. 2015. Mechanical Properties of Fiber-reinforced Concrete Made with Basalt Filament Fibers, Journal of Materials in Civil Engineering, 27(11), 04015015. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001272
  6. Tassew, S.T., Lubell, A.S. 2014. Mechanical Properties of Glass Fiber Reinforced Ceramic Concrete, Construction and Building Materials, 51, 215-224. https://doi.org/10.1016/j.conbuildmat.2013.10.046
  7. Gjørv, O.E. 2011. Durability of Concrete Structures, Arabian Journal for Science and Engineering, 36, 151-172.
  8. Onuaguluchi, O., Banthia, N. 2017. Durability Performance of Polymeric Scrap Tire Fibers and ıts Reinforced Cement Mortar, Materials and Structures, 50, 158. https://doi.org/10.1617/s11527-017-1025-7
  9. Zhang, P., Li, Q., Chen, Y., Shi, Y. and Ling, Y.F. 2019. Durability of Steel Fiber-reinforced Concrete Containing SiO2 Nano-Particles, Materials, 12(13), 2184. https://doi.org/10.3390/ma12132184
  10. Booya, E., Gorospe, K., Ghaednia H., Das, S. 2019. Durability Properties of Engineered Pulp Fibre Reinforced Concretes Made with and without Supplementary Cementitious Materials, Composites Part B: Engineering, 172, 376-386. https://doi.org/10.1016/j.compositesb.2019.05.070
  11. Aziminezhad, M., Mardi, S., Hajikarimi, P., Nejad, F.M., Gandomi, A. H. 2020. Loading Rate Effect on Fracture Behavior of Fiber Reinforced High Strength Concrete Using A Semi-Circular Bending Test, Construction and Building Materials, 240, 117681. https://doi.org/10.1016/j.conbuildmat.2019.117681
  12. Shafei, B., Kazemian, M., Dopko, M., Najimi, M. 2021. State-of-the-art Review of Capabilities and Limitations of Polymer and Glass Fibers Used for Fiber-Reinforced Concrete, Materials, 14(2), 409. https://doi.org/10.3390/ma14020409
  13. Görhan, G., Kavasoğlu, E. 2022. Effect of Fly Ash on Mechanical and Durability Properties of Mortar Containing Microfibers with Different length, European Journal of Environmental and Civil Engineering, 26(4), 1283-1299. https://doi.org/10.1080/19648189.2019.1707713
  14. Kherbache, S., Bouzidi, N., Bouzidi, M.A., Moussaceb, K., Tahakourt, A. K. 2016. The Behavior of the Concretes and Mortars Reinforced by Metallic Fibers Wastes as Substitution of Cement, Journal of Materials and Environmental Science, 7(1), 18-29.
  15. Oltulu, M., Oktan, H. 2019. Effect of Aspect Ratio of Basalt Fiber on the Mechanical Properties of Concrete, Journal of the Institute of Science and Technology, 13(4), 870–879. https://doi.org/10.21597/jist.450272
  16. Al-Ghaban, A., Jaber, H., Shaher, A. 2018. Investigation of Addition Different Fibers on the Performance of Cement Mortar, Engineering and Technology Journal, 36. https://doi.org/10.30684/etj.36.9A.3
  17. Alzoubi, H.H., Albiss, B.A. 2020. Performance of Cementitious Composites with Nano PCMs and Cellulose Nano Fibers, Construction and Building Materials, 236, 117483. https://doi.org/10.1016/j.conbuildmat.2019.117483
  18. Öz, A., Bayrak, B., Aydin, A.C. 2021. The Effect of Trio-fiber Reinforcement on the Properties of Self-compacting Fly Ash Concrete, Construction and Building Materials, 274, 121825. https://doi.org/10.1016/j.conbuildmat.2020.121825
  19. Smarzewski, P., Barnat-Hunek, D. 2017. Effect of Fiber Hybridization on Durability Related Properties of Ultra-high-performance Concrete, International Journal of Concrete Structures and Materials, 11, 315-325. https://doi.org/10.1007/s40069-017-0195-6
  20. Song, P.S., Hwang, S., Sheu, B.C. 2005. Strength Properties of Nylon-and polypropylene-fiber-reinforced Concretes, Cement and Concrete Research, 35(8), 1546-1550. https://doi.org/10.1016/j.cemconres.2004.06.033
  21. Mahdi, R.S. 2014. Experimental Study Effect of Using Glass Fiber on Cement Mortar, Journal of Babylon University/Engineering Sciences, 22(1), 162-181.
  22. He, J., Chen, W., Zhang, B., Yu, J., Liu, H. 2021. The Mechanical Properties and Damage Evolution of UHPC Reinforced with Glass Fibers and High-performance Polypropylene Fibers, Materials, 14(9), 2455. https://doi.org/10.3390/ma14092455
  23. Bayraktar, O. Y., Kaplan, G., Gencel, O., Benli, A., Sutcu, M. 2021. Physico-mechanical, Durability and Thermal Properties of Basalt Fiber Reinforced Foamed Concrete Containing Waste Marble Powder and Slag, Construction and Building Materials, 288, 123128. https://doi.org/10.1016/j.conbuildmat.2021.123128
  24. Gencel, O., Nodehi, M., Bayraktar, O.Y., Kaplan, G., Benli, A., Gholampour, A., Ozbakkaloglu, T. 2022. Basalt Fiber-reinforced foam Concrete Containing Silica Fume: An Experimental Study, Construction and Building Materials, 326, 126861. https://doi.org/10.1016/j.conbuildmat.2022.126861
  25. Mirdarsoltany, M., Rahai, A., Hatami, F., Homayoonmehr, R., Abed, F. 2021. Investigating Tensile Behavior of Sustainable Basalt–carbon, Basalt–steel, and Basalt–steel-wire Hybrid Composite Bars, Sustainability, 13(19), 10735. https://doi.org/10.3390/su131910735
  26. Girgin, Z.C. and Yildirim, M.T. 2016. Usability of Basalt Fibres in Fibre Reinforced Cement Composites, Materials and Structures, 49(8), 3309-3319. https://doi.org/10.1617/s11527-015-0721-4
  27. Dhand, V., Mittal, G., Rhee, K.Y., Park, S.J., Hui, D. 2015. A Short Review on Basalt Fiber Reinforced Polymer Composites, Composites Part B: Engineering, 73, 166-180. https://doi.org/10.1016/j.compositesb.2014.12.011
  28. Mahmood, H.F., Dabbagh, H., Mohammed, A.A. 2021. Comparative Study on Using Chemical and Natural Admixtures (Grape and Mulberry Extracts) for Concrete, Case Studies in Construction Materials, 15, e00699. https://doi.org/10.1016/j.cscm.2021.e00699
  29. TS EN 197-1. 2018. Cement- Part 1: General Cements Composition, Properties and Conformity Criteria, Turkish Standards Institute, Ankara.
  30. ASTM, C136. 2002. Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, American Society for Testing and Materials.
  31. TS EN 196-1. 2016. Methods of Testing Cement, Turkish Standards Institute, Ankara.
  32. ASTM C230/C 230M. 2008. Standard Specification for Flow Table for Use in Tests of Hydraulic Cement, American Society for Testing and Materials.
  33. ASTM C348-14. 2017. Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, American Society for Testing and Materials, American Society for Testing and Materials.
  34. ASTM C349-14. 2017. Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), American Society for Testing and Materials.
  35. ASTM C109/C 109M-99. 2012. Standard Test Method for Compressive Strength of Hydraulic Cement Mortar, American Society for Testing and Materials.
  36. TS 2824 EN 13387AC. 2009. Concrete Paving Blocks – Requirements and Test Methods.
  37. Zivica, V., Bajza, A. 2002. Acidic Attack of Cement-based Materials—A Review Part 2. Factors of Rate of Acidic Attack and Protective Measures, Construction and Building Materials, 16(4), 215-222. https://doi.org/10.1016/S0950-0618(02)00011-9
  38. Jiang, C. H., McCarthy, T. J., Chen, D., Dong, Q. Q. 2010. Influence of Basalt Fiber on Performance of Cement Mortar, Key Engineering Materials, 426, 93-96. https://doi.org/10.4028/www.scientific.net/KEM.426-427.93
  39. Ralegaonkar, R., Gavali, H., Aswath, P., Abolmaali, S. 2018. Application of Chopped Basalt Fibers in Reinforced Mortar: A review, Construction and Building Materials, 164, 589-602. https://doi.org/10.1016/j.conbuildmat.2017.12.245
  40. Han, J., Zhao, M., Chen, J., Lan, X. 2019. Effects of Steel Fiber Length and Coarse Aggregate Maximum Size on Mechanical Properties of Steel Fiber Reinforced Concrete, Construction and Building Materials, 209, 577-591. https://doi.org/10.1016/j.conbuildmat.2019.03.086
  41. Shoaei, P., Ghassemi, P., Ameri, F., Musaeei, H.R., Ban, C.C., Ozbakkaloglu, T. 2021. Comparative Study on the Effect of Fiber Type and Content on the Fire Resistance of Alkali-activated Slag Composites, Construction and Building Materials, 288, 123136. https://doi.org/10.1016/j.conbuildmat.2021.123136
  42. Zhou, B., Zhang, M., Wang, L., Ma, G. 2021. Experimental Study on Mechanical Property and Microstructure of Cement Mortar Reinforced with Elaborately Recycled GFRP Fiber, Cement and Concrete Composites, 117, 103908. https://doi.org/10.1016/j.cemconcomp.2020.103908
  43. Kim, Y.H., Yu, J.O., Jung, K.S., Moon, K.M., Park, C.W., Bae, C.W. 2018. Environmental Resistance and Mechanical Properties of Glass, Basalt and Slag Fibers, International Journal of Modern Physics B, 32(19), 1840061. https://doi.org/10.1142/S0217979218400611