Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2024 / Cilt: 26 Sayı: 76

Investigation of The Use of Spheroidal Tetrahedral Shaped Balls in Clinker Grinding

Klinker Öğütmede Küresel Bilyaya Alternatif Olarak Küresel Dörtyüzlü Bilya Kullanımının Değerlendirilmesi

Vedat Taylan Engin(DOKUZ EYLÜL ÜNİVERSİTESİ)0000-0002-7400-6208
Ufuk Malayoğlu(DOKUZ EYLÜL ÜNİVERSİTESİ)0000-0001-7788-050X
Pages
34–39
Publication Date
2024-01-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that breakage was related to grinding media charge rate and grinding time much more than ball shape.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, the effect of spheroidal tetrahedral shape balls on clinker grinding was investigated.
📊
Key Findings & Data:It was found that breakage was related to grinding media charge rate and grinding time much more than ball shape.
💡
Conclusion & Impact:Consequently, changing grinding media from spheroidal to spheroidal tetrahedral is unnecessary for present mills, but spheroidal tetrahedral balls can be determined for new building plants.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Öğünme karakteristiği · küresel dörtyüzlü bilya · küresel bilya

Abstract

In this paper, the effect of spheroidal tetrahedral shape balls on clinker grinding was investigated. It was found that breakage was related to grinding media charge rate and grinding time much more than ball shape. The effect on grinding products was investigated via grinding tests, for both ball shape types, depending on grinding time using spheroidal tetrahedral shape balls instead of spherical shape balls. Breakage characteristics were determined for two different media types. There were no significant differences between the two types of balls for the breaking process. Consequently, changing grinding media from spheroidal to spheroidal tetrahedral is unnecessary for present mills, but spheroidal tetrahedral balls can be determined for new building plants.

Özet

Bu çalışmada, küresel dörtyüzlü bilyaların klinker öğütmedeki etkisi araştırılmıştır. Boyut küçültmenin, bilyaların şeklinden çok değirmen hızı ve değirmen yapısı ile ilişkili olduğu saptanmıştır. Küresel dörtyüzlü bilyaların küresel bilyaların yerine kullanılarak öğütme ürünleri üzerindeki etkisi her iki bilya tipi için zamana bağlı öğütme testleri yapılarak araştırılmıştır. Her iki ortamda, benzer öğütme şartlarında, öğünme karakteristiği incelenmiştir. Öğütme işlemi açısından iki farklı ortam için çok önemli farklar olmadığı tespit edilmiştir. Dolayısıyla mevcut küresel ortamlarla çalışan sistemlerde değişikliğe gitmek riskli bir operasyon olmakla birlikte, yeni kurulacak olan sistemlerde diğer alternatiflerle beraber küresel dörtyüzlü bilyalar da öğütücü ortam olarak kullanılabilir.

🔖

Cite This Article

Engin, V. T., Malayoğlu, U. (2024). Investigation of The Use of Spheroidal Tetrahedral Shaped Balls in Clinker Grinding. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 26 Sayı: 76, 34–39. https://doi.org/10.21205/deufmd.2024267605

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Deniz, V., 2004. The Effect of Mill Speed on Kinetic Breakage Parameters of Clinker and Limestone, Cement and Concrete Research, Cilt. 34,, s. 1356-1371. DOI: 10.1016/j.cemconres. 2003.12.025
  2. Ipek, H. 2006. The Effects of Grinding Media Shapes on Breakage Rate: Technical Note, Minerals Engineering, Cilt. 19, s. 91-93. DOI: 10.1016/j.mineng. 2005.05.009
  3. Qian, H.Y., Kong, Q.G., Zhang, B.L. 2013. The Effects of Grinding Media Shapes on the Grinding Kinetics of Cement Clinker in Ball Mill, Powder Technology, Cilt. 235, s. 422-425. DOI: 10.1016/j.powtec.2012.10.057
  4. Seebach, M.V., Scheneider, L., Update on Finish Grinding Media Shapes on the Grinding with Improwed Energy Efficiency, IEEE Transactions on Industry Application, Cilt. IA23 No.3, 1987, s. 397-403
  5. Tzotzorkov, L., Penchev, T., Bodurov, P. Kuzev, L. 2010. Comparative Studies on Balls Versus Spheroidal Tetrahedrons Working Media to Ore Grinding in an Industrial Drum Mill. XXV. International Mineral Processing Congress (IMPC), 6-10 Eylül, Brisbane Qld, 1299-1307.
  6. Ipek, H. 2007. Effect of Grinding Media Shapes on Breakage Parameters, Particle and Particle System Characterization, Vol 24, s. 229-235.
  7. Shahbazi, B., Jafari M., Parian, M, Rosenkranz, J., Chehreh Chelgani, S. 2020. Study on impacts of media shapes on the performance of tumbling mills – A review, Minerals Engineering, Vol. 157, s. 1-10.
  8. Shi, F. 2004. Comparison of grinding media- Cylpebs versus balls, Minerals Engineering, Vol. 17, s. 1259-1268.
  9. Anonim, 2014. SGS Bulgaria Uzman Değerlendirme Raporu. Rapor No. 184001-SO1420-0018/1-2, Sofia-Bulgaristan.
  10. Kolev, N., Bodurov, P., Genchev, V., Simpson, B., Melero, M.G., Menéndez-Aguado, J.M., 2021. A Comparative Study of Energy Efficiency in Tumbling Mills with the Use of Relo Grinding Media, Metals, Vol. 11, Issue 5.
  11. Bodurov, P., Genchev, V. 2015. New and More Effective Grinding Bodies for Drum Mills Alternative of the Spherical Grinding Bodies, Journal of Multidisciplinary Science and Technology (JMEST), Vol. 2, İssue 9, p. 2516-2520.