SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2024 / Cilt: 26 Sayı: 76

Corrosion Performance of Electrodeposited Ni Nanocomposite Coatings Reinforced with Metal Oxide Particles

Elektrokimyasal Olarak Çöktürülmüş Metal Oksit Takviyelendirilmiş Ni Nanokompozit Kaplamaların Korozyon Performansı

Funda Ak Azem(DOKUZ EYLUL UNIVERSITY, FACULTY OF ENGINEERING)0000-0002-4446-1437
Işıl Birlik(DOKUZ EYLUL UNIVERSITY, FACULTY OF ENGINEERING)0000-0003-3098-2001
Tülay Koç Delice(DOKUZ EYLUL UNIVERSITY, INSTITUTE OF SCIENCE)0000-0003-3476-129X
Ramazan Dalmış(DOKUZ EYLUL UNIVERSITY, FACULTY OF ENGINEERING)0000-0002-5508-2539
Pages
28–33
Publication Date
2024-01-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, introducing SiO 2 nanoparticles to Ni matrix improves both mechanical and electrochemical properties of produced nanocomposite coatings.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The properties of traditional nickel coatings were enhanced by preparing Ni nanocomposite coatings reinforced with metal oxide nanoparticles by using electrodeposition technique.
📊
Key Findings & Data:The impact of applied current density was investigated by changing SiO2 nanoparticle concentration.
💡
Conclusion & Impact:As a result, introducing SiO 2 nanoparticles to Ni matrix improves both mechanical and electrochemical properties of produced nanocomposite coatings.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Nanokompozit Kaplamalar · SiO 2Nanopartikül · Elektrokimyasal Çöktürme

Abstract

The properties of traditional nickel coatings were enhanced by preparing Ni nanocomposite coatings reinforced with metal oxide nanoparticles by using electrodeposition technique. The impact of applied current density was investigated by changing SiO2 nanoparticle concentration. Phase structure study and morphological investigation of the samples were performed by X-Ray Diffractometer and Scanning Electron Microscopy, respectively. Vickers indentation method was utilized to determine the mechanical properties of obtained nanocomposite coatings. Potentiodynamic polarization technique was performed to evaluate electrochemical behavior of nanocomposite coatings. As a result, introducing SiO 2 nanoparticles to Ni matrix improves both mechanical and electrochemical properties of produced nanocomposite coatings.

Özet

Geleneksel nikel kaplamaların özellikleri, elektrokimyasal çöktürme yöntemi kullanılarak üretilen metal oksit nanopartiküller ile güçlendirilmiş Ni nanokompozit kaplamalar hazırlanarak geliştirilmiştir. Uygulanan akım yoğunluğunun etkisi, SiO 2 nanopartikül konsantrasyonu değiştirilerek incelenmiştir. Nanokompozit kaplamaların faz yapısı çalışması ve morfolojik incelemeleri sırasıyla XIşını Difraktometre ve Taramalı Elektron Mikroskobu ile yapılmıştır. Elde edilen nanokompozit kaplamaların mekanik özelliklerini belirlemek için Vickers indentasyon yöntemi kullanılmıştır. Nanokompozit kaplamaların elektrokimyasal davranışını değerlendirmek için potansiyodinamik polarizasyon tekniği uygulanmıştır. Sonuç olarak, Ni matrisine SiO 2 nanopartiküllerinin ilavesi, üretilen nanokompozit kaplamaların hem mekanik hem de elektrokimyasal özelliklerini iyileştirmektedir.

🔖

Cite This Article

Azem, F. A., Birlik, I., Delice, T. K., Dalmış, R., *, F. A. A. (2024). Corrosion Performance of Electrodeposited Ni Nanocomposite Coatings Reinforced with Metal Oxide Particles. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 26 Sayı: 76, 28–33. https://doi.org/10.21205/deufmd.2024267604

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (35)

  1. S. Ghaziof, W. Gao, 2015. Zn-Ni-Al2O3nano-composite coatings prepared by sol-enhancedelectroplating, Appl Surf Sci., Cilt. 351, s. 869–879, DOI: 10.1016/j.apsusc.2015.06.010
  2. R. Li, Y. Hou, B. Liu, D. Wang, J. Liang, 2016. Electrodeposition of homogenous Ni/SiO2 nanocomposite coatings from deep eutectic solvent with in-situ synthesized SiO2 nanoparticles, Electrochim Acta. Cilt. 222, s. 1272-1280, DOI: 10.1016/j.electacta.2016.11.101
  3. P. Narasimman, M.Pushpavanam, V.M. Periasamy, 2011. Synthesis, characterization and comparison of sediment electro-codeposited nickel–micro and nano SiC composites, Appl Surf Sci. Cilt. 258,s. 590-598, DOI: 10.1016/j.apsusc.2011.08.038
  4. P. Makkarn, D.D. Mishra, R.C. Agarwala, V. Agarwala, 2014, A novel electroless plating of Ni–P–Al–ZrO2 nanocomposite coatings and their properties, Ceram Int., Cilt. 40, s. 12013-12021, DOI: 10.1016/j.ceramint.2014.04.040
  5. K. Lukaszkowicz, 2011. Review of Nanocomposite Thin Films and Coatings Deposited by PVD and CVD Technology, in: Mohammed Muzibur Rahman (Eds.) Nanotechnology and Nanomaterials "Nanomaterials", InTech, s.145-162, DOI: 10.5772/25799
  6. S. Mirzamohammadi, R. Kiarasi, M. K. Aliov, A. R. Sabur & A. Hassanzadeh Tabrizi, 2010. Study of corrosion resistance and nano structure for tertiary Al2O3/Y2O3/CNT pulsed electrodeposited Ni based nanocomposite, Trans IMF, Cilt. 88, s. 93-99, DOI: 10.1179/174591910X12646052777817
  7. P. Narasimman, M. Pushpavanam, V.M. Periasamy, 2011. Synthesis, characterization and comparison of sediment electro-codeposited nickel–micro and nano SiC composites, Appl Surf Sci., Cilt 258, s.590-598, DOI: 10.1016/j.apsusc.2011.08.038
  8. E. García-Lecina, I. García-Urrutia, J.A. Díez, J. Morgiel, P. Indyka, 2012. A comparative study of the effect of mechanical and ultrasound agitation on the properties of electrodeposited Ni/Al2O3 nanocomposite coatings, Surf Coat Tech. Cilt. 206, s. 2998-3005, 10.1016/j.surfcoat.2011.12.037
  9. S. Ghaziof, W. Gao, 2014. Electrodeposition of single gamma phased Zn–Ni alloy coatings from additive-free acidic bath, Appl Surf Sci. Cilt. 311, s. 635-642, DOI: 10.1016/j.apsusc.2014.05.127
  10. N. P. Wasekar, P. Haridoss, S.K. Seshadri, G. Sundararajan, 2016. Influence of mode of electrodeposition, current density and saccharin on the microstructure and hardness of electrodeposited nanocrystalline nickel coatings, Surf Coat Tech. Cilt. 291, s. 130-140, DOI: 10.1016/j.surfcoat.2016.02.024
  11. R. Sen, S. Das, K.Das, 2011. The effect of bath temperature on the crystallite size and microstructure of Ni–CeO2 nanocomposite coating, Mater Charact. Cilt. 62, s. 257-262, DOI: 10.1016/j.matchar.2011.01.013
  12. E. Beltowska-Lehman, P. Indyka, A. Bigos, M.J. Szczerba, J. Guspiel, H. Koscielny, M. Kot, 2016. Effect of current density on properties of Ni–W nanocomposite coatings reinforced with zirconia particles, Mater Chem Phys. Cilt. 173, s. 524-533, DOI: 10.1016/j.matchemphys.2016.02.050
  13. P. Gyftou, E.A. Pavlatou, N. Spyrellis, 2008. Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC composites, Appl Surf Sci. Cilt. 254, s. 5910-5916, DOI: 10.1016/j.apsusc.2008.03.151 10.1016/j.matchemphys.2016.02.050
  14. C. Zanella, M. Lekka, P. L. Bonora, 2009. Influence of the particle size on the mechanical and electrochemical behaviour of micro and nano-nickel matrix composite coatings, J Appl Electrochem. Cilt 39, s. 31–38, DOI 10.1007/s10800-008-9635-y
  15. M.H. Sarafrazi, M. Alizadeh, 2017. Improved characteristics of Ni-electrodeposited coatings via the incorporation of Si and TiO2 particulate reinforcements, J Alloy Compd. Cilt. 720, s. 289-299, DOI: 10.1016/j.jallcom.2017.05.223
  16. E. Beltowska-Lehman, P. Indyka, A. Bigos, M.J. Szczerba, M. Kot, 2016. Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites, J Electro anal Chem. Cilt. 775, s. 27-36. DOI: 10.1016/j.jelechem.2016.05.003
  17. I Haq, T. I. Khan, 2011. Tribological behavior of electrodeposited Ni-SnO2 nanocomposite coatings on steel, Surf Coat Tech. Cilt. 205, s. 2871-2875, DOI: 10.1016/j.surfcoat.2010.10.059
  18. S. Mohajeri, A. Dolati, S. Rezagholibeiki, 2011. Electrodeposition of Ni/WC nano composite in sulfate solution, Mater Chem Phys. Cilt. 129, s. 746-750, DOI: 10.1016/j.matchemphys.2011.04.053
  19. L. I. U. Yan, S. R. Yu, J. D.Liu, Z. W.Han, D. S. Yuan, 2011. Microstructure and wear resistance of electrodeposited Ni-SiO2 nano-composite coatings on AZ91HP magnesium alloy substrate, T Nonferr Metal Soc. Cilt. 21, s.483-488. DOI: 10.1016/S1003-6326(11)61629-4
  20. M. Srivastava, J. N. Balaraju, B. Ravishankar, K. S. Rajam, 2010. Improvement in the properties of nickel by nano-Cr2O3 incorporation, Surf Coat Tech. Cilt. 205, s. 66-75, DOI: 10.1016/j.surfcoat.2010.06.004
  21. F. Xia, W. Jia, C.Ma, J. Wang, 2018. Synthesis of Ni–TiN composites through ultrasonic pulse electrodeposition with excellent corrosion and wear resistance, Ceram Int. Cit. 44, s. 766-773, DOI: 10.1016/j.ceramint.2017.09.245
  22. F. Bahrami, R. Amini, A. H. Taghvaei, 2017. Microstructure and corrosion behavior of electrodeposited Ni-based nanocomposite coatings reinforced with Ni60Cr10Ta10P16B4 metallic glass particles, J Alloy Compd. Cilt. 714, s. 530-536, DOI: 10.1016/j.jallcom.2017.04.069
  23. R. Abdel-Karim, 2016. Electrochemical Synthesis of Nanocomposites, A. M. A. Mohamed, Teresa D. Golden (Eds.), Electrodeposition of Composite Materials, Publıshed By Intech, Chapter 1, DOI: 10.5772/62189
  24. Y. Wang, Q. Zhou, K. Li., Q. Zhong, Q. B. Bui, 2015. Preparation of Ni–W–SiO2 nanocomposite coating and evaluation of its hardness and corrosion resistance, Ceram Int. Cilt. 41, s. 79-84, DOI: 10.1016/j.ceramint.2014.08.034
  25. M. Srivastava, V.E. Selvi, V.W. Grips, K.S. Rajam, 2006. Corrosion resistance and microstructure of electrodeposited nickel–cobalt alloy coatings, Surf Coat Tech. Cilt 201, s. 3051-3060, DOI: 10.1016/j.surfcoat.2006.06.017
  26. M. Masoudi, M. Hashim, H. M. Kamari, 2014. Characterization of novel Ni-Al2O3-SiC nanocomposite coatings synthesized by co-electrodeposition, Appl Nanosci. Cit. 4, s. 649-656, DOI: 10.1007/s13204-013-0250-9
  27. C. Wang, Lida Shen, M. Qiu, Z. Tian, W. Jiang, 2017. Characterizations of Ni-CeO2 nanocomposite coating by interlaced jet electrodeposition, J Alloy Compd. Cilt. 727, s. 269-277, DOI: 10.1016/j.jallcom.2017.08.105
  28. L. Benea, P. L. Bonora, A. Borello, S. Martelli, F. Wenger, P. Ponthiaux, J. Galland, 2002. Preparation and investigation of nanostructured SiC-nickel layers by electrodeposition, Mater Res Soc Symp P. Cilt.151, s. 89-95, DOI: 10.1016/S0167-2738(02)00586-6
  29. E. Beltowska-Lehman, P. Indyka, A. Bigos, M.J. Szczerba, M. Kot, 2015. Ni–W/ZrO2 nanocomposites obtained by ultrasonic DC electrodeposition, Materials & Design, Cilt. 80, s. 1-11, DOI: 10.1016/j.matdes.2015.04.049
  30. S. T. Aruna, S. Diwakar, A. Jain, K. S. Rajam, 2005. Comparative study on the effect of current density on Ni and Ni-Al2O3 nanocomposite coatings produced by electrolytic deposition, Surf Eng. Cilt. 21, s. 209-214, DOI: 10.1179/174329405X50037
  31. L. Chen, L. Wang, Z. Zeng, J. Zhang, 2006. Effect of surfactant on the electrodeposition and wear resistance of Ni-Al2O3 composite coatings, Mat Sci Eng A. Cilt. 434, s. 319-325, DOI: 10.1016/j.msea.2006.06.098
  32. C. R. Raghavendra, S. Basavarajappa, I. Sogalad, & V. K. Saunshi, 2021. Study on surface roughness parameters of nano composite coatings prepared by electrodeposition process. Materials Today: Proceedings, Cilt. 38, s. 3110-3115, DOI: 10.1016/j.matpr.2020.09.493
  33. B. Li, D. Li,W. Chen, Y. Liu, J. Zhang, Y. Wei,. & W. Jia, 2019. Effect of current density and deposition time on microstructure and corrosion resistance of Ni-W/TiN nanocomposite coating. Ceramics International. Cilt. 45(4), s. 4870-4879, DOI: 10.1016/j.ceramint.2018.11.184
  34. P. Vanysek, 2002. Handbook of Chemistry and Physics, P.Electrochemical Series. In CRC, 83rd ed.; Lide, D. R., Ed.; CRC Press: Boca Raton,; 8-31s.
  35. Z. Song, H. Zhang, X. Fu, J. Lin, M. Shen, Q. Wang, & S. Duan, 2020. Effect of Current Density on the Performance of Ni-P-ZrO2-CeO2 Composite Coatings Prepared by Jet-Electrodeposition, Coatings. Cilt.10(7), s. 616, DOI: 10.3390/coatings10070616