SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2026 / Cilt: 27 Sayı: 80

Fabrication and Characterisation of YIG Doped Hydroxyapatite Composites

YIG Katkılanmış Hidroksiapatit Kompozitlerinin Üretimi ve Karakterizasyonu

Selim Demirci(MARMARA UNIVERSITY, FACULTY OF ENGINEERING)0000-0003-3482-7957
Pages
284–289
Publication Date
2025-05-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These new composites show potential for biomedical applications, especially for bone regeneration and cancer treatment.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the fabrication and characterization of Yttrium Iron Garnet (YIG) doped hydroxyapatite (HAp) composites were carried out.
📊
Key Findings & Data:Then, commercial HAp powders and YIG powders were mixed with 1, 2 and 3 wt. % of commercial HAp powders to obtain pellets and these pellets were sintered at 1200 °C for 3 hours.
💡
Conclusion & Impact:These new composites show potential for biomedical applications, especially for bone regeneration and cancer treatment.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Itriyum demir Garnet (YIG) · Hidroksiapatit (HAp) · Biyoseramik Kompozitler

Abstract

In this study, the fabrication and characterization of Yttrium Iron Garnet (YIG) doped hydroxyapatite (HAp) composites were carried out. HAp is a bioceramic material known for its biocompatibility and osteogenic properties and is widely used in bone tissue engineering. However, the low mechanical strength and brittleness of HAp limit the use of this material in load-bearing applications. In order to overcome these deficiencies, it is aimed to improve both mechanical properties and magnetic properties of the material by adding YIG to HAp material. In the study, YIG powders were synthesized with the help of citric acid by sol-gel method using yttrium (Y) and iron (Fe) salts. Then, commercial HAp powders and YIG powders were mixed with 1, 2 and 3 wt. % of commercial HAp powders to obtain pellets and these pellets were sintered at 1200 °C for 3 hours. The produced composites were characterized by thermalgravimetric analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, magnetic and wettability tests. In addition, the mechanical properties of the composites were analyzed by hardness measurements. Significant improvements in both the magnetic and mechanical properties of the obtained composites were observed with increasing YIG content. These new composites show potential for biomedical applications, especially for bone regeneration and cancer treatment.

Özet

Bu çalışmada, itriyum demir garnet (YIG) katkılı hidroksiapatit (HAp) kompozitlerinin üretimi ve karakterizasyonu gerçekleştirilmiştir. HAp, biyouyumluluğu ve osteojenik özellikleri ile bilinen bir biyoseramik malzeme olup, kemik doku mühendisliğinde yaygın olarak kullanılmaktadır. Ancak HAp'in düşük mekanik mukavemeti, bu malzemenin yük taşıyan uygulamalarda kullanımını kısıtlamaktadır. Bu eksiklikleri gidermek amacıyla HAp malzemesine YIG eklenerek, hem mekanik özelliklerin iyileştirilmesi hemde malzemeye manyetik özelliklerin kazandırılması hedeflenmiştir. Çalışmada, YIG tozları itriyum (Y) ve demir (Fe) tuzları kullanılarak sitrik asit yardımıyla sol-jel yöntemiyle sentezlenmiştir. Daha sonra, ticari HAp tozlarıyla elde edilen YIG tozları ağırlıkça % 1, 2 ve 3 oranlarda olacak şekilde karıştırılarak peletler elde edilmiştir ve bu peletler 1200°C'de 3 saat süreyle sinterlenmişlerdir. Üretilen kompozitler, termalgravimetrik analiz (TG/DTA), X ışını kırınımı (XRD), taramalı elektron mikroskobu (SEM), Raman spektroskopisi, manyetik ve ıslatılabilirlik testleri ile karakterize edilmişlerdir. Ayrıca üretilen kompozitlerin mekanik özellikleri sertlik ölçümleriyle incelenmiştir. Elde edilen kompozitlerin hem manyetik özelliklerinde hem de mekanik özelliklerinde YIG miktarının artmasıyla belirgin iyileşmeler olduğu gözlenmiştir. Bu yeni kompozitler, biyomedikal uygulamalarda, özellikle kemik rejenerasyonu ve kanser tedavisinde kullanılmak üzere potansiyel vadetmektedir.

🔖

Cite This Article

Demirci, S. (2025). Fabrication and Characterisation of YIG Doped Hydroxyapatite Composites. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 27 Sayı: 80, 284–289. https://doi.org/10.21205/deufmd.2025278015

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Sarath, C.V., Da, R.K., Jongjun, K., Honglae, S., Sung, Y.Y. 2019. Controlled nanoparticle synthesis of Ag/Fe co-doped hydroxyapatite system for cancer cell treatment, Materials Science & Engineering C, Cilt. 98, s. 311-323. DOI: 10.1016/j.msec.2018.12.148
  2. Idil, U., Bengi, Y., Zafer E. 2021. Zn-doped hydroxyapatite in biomedical applications, Journal of the Australian Ceramic Society, Cilt. 57, s. 869-897. DOI: 10.1007/s41779-021-00583-4
  3. Erdem, U., Dogan, D., Bozer, B. M., Turkoz, M. B., Yıldırım, G., Metin, A. U. 2022. Fabrication of mechanically advanced polydopamine decorated hydroxyapatite/polyvinyl alcohol bio-composite for biomedical applications: In-vitro physicochemical and biological evaluation. Journal of the Mechanical Behavior of Biomedical Materials, Cilt. 136, s. 105517. DOI: 10.1016/j.jmbbm.2022.105517
  4. Stasys, T., Kunio, I., Rimantas, R., Aivaras, K. 2020. Zinc and chromium co-doped calcium hydroxyapatite: Sol-gel synthesis, characterization, behaviour in simulated body fluid and phase transformations, Journal of Solid State Chemistry, Cilt. 284, s. 121202. DOI: 10.1016/j.jssc.2020.121202.
  5. Rushikesh, F., Varun, S., Papori, S., Borah, J.P., Lalit, M.P. 2020. Yttrium iron garnet for hyperthermia applications: Synthesis, characterization and in-vitro analysis, Materials Science and Engineering: C, Cilt. 116, s. 111163. DOI: 10.1016/j.msec.2020.111163
  6. Ying, L., Haibo, Y., Jianfeng, Z., Fen, W. 2010. Magnetic and Dielectric Properties of YIG/HDPE Composites for High-Frequency Applications, International Journal of Polymeric Materials and Polymeric Biomaterials, Cilt. 59, s. 570-576. DOI: 10.1080/00914031003760675
  7. Liming, D., Dongling, Y., Zujian, W., Rongbing, S., Xifa, L., Xiaoming, Y., Chao, H. 2024. Effect of Gadolinium Addition on Magnetic and Magneto-Optical Properties of Yttrium Iron Garnet Crystal, Crystal Growth& Design, Cilt. 24, s. 4437-4442. DOI: 10.1021/acs.cgd.4c00098
  8. Chia, Y.O., Mohd, H., Singh, R. 2007. Properties of hydroxyapatite produced by annealing of bovine bone, Ceramics International, Cilt. 33, s. 1171-1177. DOI: 10.1016/j.ceramint.2006.04.001
  9. Aymen, A., Jamel, B. 2022. Preparation and Microstructural Characterization of Natural Hydroxyapatite Extracted from Animal Bones, JOM, Cilt. 74, s. 3119–3132. DOI: 10.1007/s11837-022-05364-3
  10. Hassan, N., Rasoul, S.M., Mohammad, H.K., Maria, C.P., Mahdieh, S., Reza, Z.E., Reza, F. 2020. Characterization of hydroxyapatite-reduced graphene oxide nanocompositesconsolidated via high frequency induction heat sintering method, Journal of Asian Ceramic Societies, Cilt. 8, s. 1296–1309. DOI:10.1080/21870764.2020.1842119
  11. Tamás, U. 2004. Microstructural parameters from X-ray diffraction peak broadening, Scripta Materialia, Cilt. 51, s. 777-781. DOI: 10.1016/j.scriptamat.2004.05.007
  12. Miriam, M. Ramón, T., Adolfo I. F. 2020. Reactivity of Ca and P precursors to form hydroxyapatite and its influence on the properties of the obtained powders, Ceramics International, Cilt. 46, s. 27860-27865. DOI: 10.1016/j.ceramint.2020.07.284
  13. Aiyah, S.N., Mustafa, F.K., Shather, A.H., Haider, A. A., Mustafa, M. 2024. Silver and magnesium co-doped β-TCP nanoparticles as potential materials for bone tissue engineering, Applied Physics A, Cilt. 130, s.242. DOI: 10.1007/s00339-024-07395-w
  14. Chee, H.L, Andanastuti, M., Chou, Y.T., Masfueh, R., Noor, F. A. 2014. Sintering of Hydroxyapatite/Yttria Stabilized Zirconia Nanocomposites under Nitrogen Gas for Dental Materials, Advances in Materials Science and Engineering, Cilt. 2014. DOI:10.1155/2014/367267
  15. Songlin, D., Pei, F., Chengde, G., Tao, X., Kun, Y., Cijun, S., Shuping, P. 2015. Microstructure Evolution and Mechanical Properties Improvement in Liquid-Phase-Sintered Hydroxyapatite by Laser Sintering, Materials, Cilt. 8, s. 1162-1175. DOI: 10.3390/ma8031162
  16. Sandra, M.L.R., Cristian, F.R.G., Alicia, R., Efrain, R.R., Mario, E. R. G. 2016. Study of bovine hydroxyapatite obtained by calcination at low heating rates and cooled in furnace air, Journal of Materials Science, Cilt. 51, s. 4431–4441. DOI: 10.1007/s10853-016-9755-4
  17. Sandra, M.L.R., Luis, F.Z.O., Rodrigo, J.C., Maria, A.M., Mario, E.R.G. 2019. Effect of the crystal size on the infrared and Raman spectra of bio hydroxyapatite of human, bovine, and porcine bones, The Journal of Raman Spectroscopy, Cilt. 50, s. 1120-1129. DOI: 10.1002/jbm.b.35118
  18. Govindan, S.K., Gopalu, K., Easwaradas, K.G., Evgeny, K., Nguyen, V.M., Mikhail, V.G., Denis, K. 2018. Size and morphology-controlled synthesis of mesoporous hydroxyapatite nanocrystals by microwave-assisted hydrothermal method, Ceramics International, Cilt. 44, s. 11257-11264. DOI: 10.1016/j.ceramint.2018.03.170
  19. Susneha, T., Someshwar, P. & Prasad, N.V. 2024. Electrical, magnetic, and Raman spectroscopic studies on Bi-modified YIG ceramics. J Mater Sci: Mater Electron, Cilt. 35, s. 968. DOI: 10.1007/s10854-024-12655-9
  20. Noam, E., Sharon, S., Irena, S., Dafna, B., Daniel, A., Gil, R. 2009. The effect of surface treatment on the surface texture and contact angle of electrochemically deposited hydroxyapatite coating and on its interaction with bone-forming cells, Acta Biomaterialia, Cilt. 5, s. 3178-3191. DOI: 10.1016/j.actbio.2009.04.005
  21. Cosmin, M.C., Alina, V., Mihaela, D., Diana, M.V. 2018. Influence of deposition temperature on the properties of hydroxyapatite obtained by electrochemical assisted deposition, Ceramics International, Cilt. 44, s. 669-677. DOI: 10.1016/j.ceramint.2017.09.227
  22. Zheng, P.Y., Xue, Y.G., Chun, J.Z. 2010. Recyclable Fe3O4/hydroxyapatite composite nanoparticles for photocatalytic applications, Chemical Engineering Journal, Cilt. 165, s.117-121. DOI:10.1016/j.cej.2010.09.001
  23. Subha, B., Varun, P.P., Ravichandran, K., Sankara, N.N., Suresh, S., Suriati, P., Faruq, M., Hamad, A. A., Prasanna, K.O., Won, C.O. 2021. Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite, Ceramics International, Cilt. 47, s. 5061-5070. DOI:10.1016/j.ceramint.2020.10.084
  24. Junfeng, N., Jian, Z., Xiaoguang, H., Lin, W., Guizhen, L., Jiping, C. 2019. Effect of TiO2 doping on densification and mechanical properties of hydroxyapatite by microwave sintering, Ceramics International, Cilt. 45, s. 13647-13655. DOI: 10.1016/j.ceramint.2019.04.007