Journals / Mediterranean Agricultural Sciences / 2001 / Volume: 14 Issue: 2

Effect of Forward Speed and Seed Spacing on Seeding Uniformity of A Precision Vacuum Metering Unit for Melon and Cucumber Seeds

Hava Emişli Bir Tek Dane Ekici Düzen İle Kavun Ve Hıyar Ekiminde Sıra Üzeri Uzaklık ve İlerleme Hızının Ekim Düzgünlüğüne Etkisi

Pages
63–67
Publication Date
2001-12-02
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In terms of seeding uniformities the most suitable forward speeds were determined as 1.0, and 1.5 m/s, and the most suitable seed spacing was determined as 64 cm for melon and cucumber seeding.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this research is to examine the melon and cucumber seeding by the precision vacuum seeder at different forward speeds and seed spacings.
📊
Key Findings & Data:The trials were carried out in laboratory conditions at the forward speeds of 0.5, 1.0, 1.5, and 2.0 m/s, and seed spacings of 40, 55, and 64 cm.
💡
Conclusion & Impact:In terms of seeding uniformities the most suitable forward speeds were determined as 1.0, and 1.5 m/s, and the most suitable seed spacing was determined as 64 cm for melon and cucumber seeding.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:tek dane ekim · kavun · hıyar

Abstract

The purpose of this research is to examine the melon and cucumber seeding by the precision vacuum seeder at different forward speeds and seed spacings. The trials were carried out in laboratory conditions at the forward speeds of 0.5, 1.0, 1.5, and 2.0 m/s, and seed spacings of 40, 55, and 64 cm. According to results, the differences among seeding uniformities were statistically important for different forward speeds and seed spacings. In terms of seeding uniformities the most suitable forward speeds were determined as 1.0, and 1.5 m/s, and the most suitable seed spacing was determined as 64 cm for melon and cucumber seeding.

Özet

Bu araştırma kavun ve hıyar tohumlarının hava emişli bir tek dane ekici düzen ile ekiminde ilerleme hızı ve sıra üzeri uzaklığın ekim kalitesine etkisini belirlemek amacıyla yapılmıştır. Laboratuvar koşullarında yapılan araştırma 4 farklı ilerleme hızı (0,5, 1,0, 1,5 ve 2,0 m/s) ve üç farklı sıra üzeri uzaklıkta gerçekleştirilmiştir. Araştırma sonuçlarına göre ilerleme hızı ve sıra üzeri uzaklığın istatistiksel olarak ekim kalitesini etkilediği ve genelde her iki tohum içinde en iyi ekim kalitesinin 1,0 ve 1,5 m/s ilerleme hızlarında ve 64 cm sıra üzeri uzaklıkta elde edildiği saptanmıştır.

🔖

Cite This Article

Karayel, D., Özmerzi, A. (2001). Effect of Forward Speed and Seed Spacing on Seeding Uniformity of A Precision Vacuum Metering Unit for Melon and Cucumber Seeds. Mediterranean Agricultural Sciences, Volume: 14 Issue: 2, 63–67. https://ajindex.com/articles/1170720

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Barut, Z. B. ve Özmerzi, A., 1994. Domates Tohumunun Hava Akımlı Ekim Makinası İle Doğrudan Ekim Olanakları. Tar, Mek, 15. Ulusal Kong,, 20 22 Eylül, Antalya, 67-75.
  2. Bracy, R. P. and Parish, R. L., 1998. Seeding Uniformity of Precision Seeders. Horttechnology 8(2), 3-15.
  3. Hudspeth, E. B. and Wanjura, D. F., 1970. A Planter for Precision Depth and Placement of Cotton Seed. Transactions of ASAE, 13(2), 153-154.
  4. Kachman, S. D. and Smith, J. A., 1995. Alternative measures of accuracy in plant spacing for planters using single seed metering. Transaction of the ASAE, 38(2), 379 387.
  5. Öğüt, H., 1991. Türk-Koop Pnömatik Hassas Ekim Makinasında Mısır İçin Optimum İlerleme Hızı ve Sıra Üzeri Aralığın Belirlenmesi. Doğa-Turkish Journal of Agriculture and Foresty (15), 423-431.
  6. Özmerzi, A., Barut, Z. B. ve Yaldız, O., 1992. Antalya’da Bazı İlçelerdeki Tarla Sebze Üretiminin Mekanizasyonuna Yönelik Sorunlar. Batı Akdeniz Bölgesi I. Tarım Kongresi, 4-6 Kasım, Antalya, 78-87.
  7. Parish, R. L., 1972. Development of a narrow-row, vertical plate planter. Transactions of ASAE, 15(4), 636–637.
  8. Soos, P. and Szüle, Z. S. A., 1989. A Comparative Evaluation of Modern Sugar Beet Drills. Bulleting, of the University of Agricultural Sciences, Gödöllo, No.1, 166-170.