SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2020 / Cilt: 30 - Sayı: 4

A study on coating with nanoclay on the production of flame retardant cotton fabrics

Nuriye KERTMEN
Eylen Sema DALBAŞI
Ayşegül KÖRLÜ
Arif ÖZGÜNEY
Saadet YAPAR
Pages
302–311
Publication Date
2020-12-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This result was attributed to the barrier effect of the nanoclay.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, flame retardant properties of 100% cotton fabrics were tried to be improved by using commercial nanoclay (Cloisite 20A) which is a clay based montmorillonite.
📊
Key Findings & Data:Fourier-transform infrared spectroscopy (FTIR) analysis was carried out for Cloisite 20A, untreated and coated fabrics.
💡
Conclusion & Impact:This result was attributed to the barrier effect of the nanoclay.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Pamuk · Nanokil · Kaplama

Abstract

In this study, flame retardant properties of 100% cotton fabrics were tried to be improved by using commercial nanoclay (Cloisite 20A) which is a clay based montmorillonite. Flame retardancy and thermal decomposition behavior of the samples were characterized by the vertical burning test, limiting oxygen index (LOI), and thermogravimetric analysis (TGA). The surface morphology of untreated and treated fabric was examined using a scanning electron microscope (SEM). Fourier-transform infrared spectroscopy (FTIR) analysis was carried out for Cloisite 20A, untreated and coated fabrics. The results of the tests showed that the coating treatment even at low nanoclay concentration is enough to have a considerable flame retardant effect. This result was attributed to the barrier effect of the nanoclay.

Özet

Bu çalışmada, kil bazlı montmorillonit olan ticari nanokil (Cloisite 20A) kullanılarak % 100 pamuklu kumaşların güç tutuşurluk özellikleri geliştirilmeye çalışılmıştır. Örneklerin güç tutuşurluk ve termal bozunma davranışları; dikey yanma testi, sınırlı oksijen indeksi testi (LOI) ve termogravimetrik analizlerle (TGA) karakterize edilmiştir. İşlem görmemiş ve işlem görmüş kumaşların yüzey morfolojisi bir tarama elektron mikroskobu (SEM) kullanılarak incelenmiştir. Cloisite 20A, işlem görmemiş ve kaplanmış kumaşların Fourier-dönüşümü kızılötesi spektroskopisi (FTIR) analizi yapılmıştır. Testlerin sonuçları, düşük nanokil konsantrasyonunda dahi kaplama işleminin önemli bir güç tutuşurluk etkisinin elde edilmesinde yeterli olduğunu göstermiştir. Bu sonuç, nanokilin bariyer etkisine dayandırılmıştır.

🔖

Cite This Article

KERTMEN, N., DALBAŞI, E. S., KÖRLÜ, A., ÖZGÜNEY, A., YAPAR, S. (2020). A study on coating with nanoclay on the production of flame retardant cotton fabrics. Tekstil ve Konfeksiyon, Cilt: 30 - Sayı: 4, 302–311. https://ajindex.com/articles/116905

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Liu HS, Zhang XL, Song LX. (2011) Comprehensive evaluation and prediction of fire accidents in China based on statistics. China Saf Sci J 21(6), p.54-59.
  2. Cordner A, Mulcahy M, Brown P. (2013). Chemical regulation on fire: rapid policy advances on flame retardants. Environ Sci Technol. https://doi.org/10.1021/es3036237.
  3. Gao D, Li R, Lv B, Ma J, Tian F, Zhang J. (2015). Flammability, thermal and physical-mechanical properties of cationic polymer/montmorillonite composite on cotton fabric. Composites Part B. https://doi.org/10.1016/j.compositesb.2015.03.061.
  4. Holder KM, Smith RJ, Grunlan JC. (2017). A review of flame retardant nanocoatings prepared using layer-by-layer assembly of polyelectrolytes. J Mater Sci. https://doi.org/10.1007/s10853-017-1390-1.
  5. Du L, Xu G, Zhang Y, Qian J, Chen J. (2011). Synthesis and properties of a novel intumescent flame retardant (IFR) and its application in halogen-free flame retardant ethylene propylene diene terpolymer (EPDM). Polym Plast Tech Eng. https://doi.org/10.1080/03602559.2010.543224.
  6. Yuan H, Xing W, Zhang P, Song L, Hu Y. (2012). Functionalization of cotton with UV cured flame retardant coatings. Indust Eng Chem Res. https://doi.org/10.1021/ie202468u.
  7. Zhang DQ, Williams BL, Shrestha SB, Nasir Z, Becher EM, Lofink BJ, Santos VH, Patel H, Peng XH, Sun LY. (2017). Flame retardant and hydrophobic coatings on cotton fabrics via sol-gel and self-assembly techniques. J Colloid Interface Sci. https://doi.org/10.1016/j.jcis.2017.06.087.
  8. Başyiğit ZO, Kut D. (2018). Formaldehyde-free and halogen-free flame retardant finishing on cotton fabric. Tekst Konfeksiyon. https://doi.org/10.32710/tekstilvekonfeksiyon.482884.
  9. Ghoranneviss M, Shahidi S. (2014). Flame retardant properties of plasma pretreated/metallic salt loaded cotton fabric before and after direct dyeing. J Fusion Energ. https://doi.org/10.1007/s10894-013-9642-9.
  10. Carosio F, Alongi J, Malucelli G. (2012). Layer by layer ammonium polyphosphate based coatings for flame retardancy of polyester-cotton blends. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2012.02.049.
  11. Shahidi S, Ghoranneviss M. (2014). Effect of plasma pretreatment followed by nanoclay loading on flame retardant properties of cotton fabric. J Fusion Energ. https://doi.org/10.1007/s10894-013-9645-6.
  12. Ghosh A. (2011). Nano-clay particle as textile coating. Int J Eng Technol IJET-IJENS 11(5), p.34-36.
  13. Uddin F. (2008). Clays, nanoclays and montmorillonite minerals. Metall Mater Trans A. https://doi.org/10.1007