SavedAdd your journal

Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 17 - Sayı: 1

The Effect of Addition of ZnO to Granite Body on Sintering and Mechanical Properties

Savaş ELMAS
Pages
51–57
Publication Date
2020-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the analysis of the sample with 3% added ZnO with XRD, it was observed that the solubility of quartz was increased, mullite formation was prevented; besides 27.4 wt.% spinel phase and 13.8 wt.% albite formation was observed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In granite body, 1-3-5 wt% ZnO was replaced instead of feldspar and fired in an industrial continuous production kiln.
📊
Key Findings & Data:The fired strength values of the standard and 3% ZnO added body are 399.94kg/cm2, 510.50 kg / cm2, respectively.
💡
Conclusion & Impact:In the analysis of the sample with 3% added ZnO with XRD, it was observed that the solubility of quartz was increased, mullite formation was prevented; besides 27.4 wt.% spinel phase and 13.8 wt.% albite formation was observed.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:porcelain stoneware · ceramics · ZnO

Abstract

In granite body, 1-3-5 wt% ZnO was replaced instead of feldspar and fired in an industrial continuous production kiln. Physical properties of the tiles were determined including dried strength, fired strength, water absorption, fired loss, and colorimeter values. X-Ray Diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-Ray (EDX) measurements for distinctive microstructural changes and phases formed were done. The fired strength values of the standard and 3% ZnO added body are 399.94kg/cm2, 510.50 kg / cm2, respectively. Water absorption and firing shrinkage values are close to each other. In the analysis of the sample with 3% added ZnO with XRD, it was observed that the solubility of quartz was increased, mullite formation was prevented; besides 27.4 wt.% spinel phase and 13.8 wt.% albite formation was observed.

🔖

Cite This Article

ELMAS, S. (2020). The Effect of Addition of ZnO to Granite Body on Sintering and Mechanical Properties. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 17 - Sayı: 1, 51–57. https://ajindex.com/articles/116482

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. TSF2019 Faaliyet Raporu. https://serfed.com/upload/raporlar/TSF%202019%20FAAL%C4%B0YET%20RAPORU%20SON.pdf (accessed at 15.10.2020
  2. Paganelli M. and Sighinolfi D., 2009.Effect of Quartz Particle Size on Porcelain Stoneware Sintering by Means of Optical Dilatometry. Ceramic Forum International, Volume 86
  3. Biesuz, M., Abate W.D., Sglavo V., 2018. Porselem stoneware consolidation by flash sintering. Journal of American Ceramic Society, Volume 101, pp.71-81
  4. Mahdi O.S., 2018. Study the Influence of Sintering on the Properties of Porcelain Stoneware Tiles. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6, pp. 3248-3254
  5. Zanelli C., Raimondo M., Guarini G. and Dondi M., 2011. The vitreous phase of porcelain stoneware: Composition, evolution during sintering and physical properties. Journal of Non-crystalline Solids, Volume 357, pp. 3251-3260
  6. Fortuna D., 2000, Ceramic Technology-Sanitaryware. Gruppo Editoriale Faenza Editrice
  7. Ryan W., Radford C., 1987. Whitewares Productions, Testing and Quality Control. The Institute of Ceramics, Pergamon Press
  8. Lundin S. T., 1964. Microstructure of Porcelain pp.93-106 in Microstructure of Ceramic Materials, Proceedings of the American Ceramic Society Symposium, National Bureau of Standards Miscellanesous Publications No.257. National Bureau of Standard, Gaithersburg, MD
  9. Vari A. Drying and Firing of Ceramic Tiles, Modena-Italia, S.A.L.A.srl, via carlo Zucchi,21 A/B
  10. Worral W.E., 1975. Clay and Ceramic Raw Materials, New York, Elsevier Applied Science Publishers
  11. Norton F.H., 1970. Fine Ceramics Technology and Applications,Florida, Robert E.Krieger Publishing Comp,INC
  12. Iqbal Y., Lee W. E., 2000, Microstructural Evolution in Triaxial Porcelain, J.Am. Ceram. Soc., 83 [12] 3121-27
  13. Bhattacharyya S., Snehesh T.S., 2015. Improvement of fired properties in porcelain system by the addition of transition metal oxides, Journal of The Australian Ceramic Society, Volume 51[1], 8-15
  14. Bhattacharya S., Snehish T.S., 2015. Effect of cobalt oxide additive on the fired properties of tri-axial ceramic, Ceramics International 41, 61-67. 15.Bhattacharyya S., Das S.K., Mıtra N.K., 2005. Effect of titania on fired characteristics of triaxial porcelain, Bull. Mater. Sci., Vol. 28, No. 5, August, pp. 445–452. © Indian Academy of Sciences. 16.S.P., 1974. Ceram.Bull.53, 169
  15. Iya S.G.D, Noh M.Z., Razak S.N.A., Sharip N., Kutty A.A., 2019. Effect of Iron (111) Oxi