SavedAdd your journal

Journals / Karaelmas Fen ve Mühendislik Dergisi / 2026 / Cilt: 8 Sayı: 1

Experimental Investigation of Variations of Mechanical Properties of 6x19 Standard Steel Wire Rope Subjected to Different Damages

Farklı Hasarlara Maruz Bırakılan 6x19 Standart Çelik Tel Halatın Mekanik Özelliklerindeki Değişimlerin Deneysel İncelenmesi

Yusuf Aytaç Onur(Bülent Ecevit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Zonguldak, Türkiye)
Osman Aycan(Bülent Ecevit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Zonguldak, Türkiye)
Pages
181–187
Publication Date
2018-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The most critical failure type has been found as 16h corrosion for rope investigated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Steel wire ropes in elevators are subjected to different damage types having different extents depending on operating conditions.
📊
Key Findings & Data:In this study, 6x19 Standard steel wire rope with independent wire rope core IWRC which is also appropriate for elevator systems has been used.
💡
Conclusion & Impact:The most critical failure type has been found as 16h corrosion for rope investigated.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Asansör halatları · Çekme dayanımı · Çelik tel halat

Abstract

Steel wire ropes in elevators are subjected to different damage types having different extents depending on operating conditions. In this study, variations in axial lifting capacities of damaged samples have been investigated. Three different damages have been created on the rope specimens at laboratory environment by considering discard criteria of elevator ropes. The tensile strength loss amounts of damaged rope samples have been determined by conducting tensile tests. In this study, 6x19 Standard steel wire rope with independent wire rope core IWRC which is also appropriate for elevator systems has been used. The obtained data have formed a source based on experimental results helping about to select rope, the periodic maintenance of ropes and the discard criteria for elevators. The most critical failure type has been found as 16h corrosion for rope investigated.

Özet

Asansörlerde kullanılan çelik tel halatlar, zaman içerisinde işletme koşullarına bağlı olarak farklı hasar türlerine, farklı derecelerde maruz kalırlar. Bu çalışmada, hasar görmüş halat numunelerinin eksenel kaldırma kapasitelerindeki değişimler incelenmiştir. Asansör halatlarını servis dışına bırakma kriterleri göz önüne alınarak, laboratuvar ortamında halat numunelerine 3 farklı hasar verilmiştir. Halat numunelerine çekme testleri yapılarak, halatların çekme mukavemetlerindeki düşüş miktarları tespit edilmiştir. Bu çalışmada, asansör sistemleri için de uygun olan 6x19 Standart bağımsız tel halat özlü tel halat kullanılmıştır. Elde edilen veriler, asansörler için halat seçimi, halatların periyodik bakımı ve gerekirse halatları servis dışı bırakma gibi konularda yardımcı olacak deneysel sonuçlara dayalı bir kaynak oluşturmuştur. İncelenen halat için en kritik hasar tipi, 16 saat süresince korozyona maruz kalma olarak tespit edilmiştir

🔖

Cite This Article

Onur, Y. A., Aycan, O. (2018). Experimental Investigation of Variations of Mechanical Properties of 6x19 Standard Steel Wire Rope Subjected to Different Damages. Karaelmas Fen ve Mühendislik Dergisi, Cilt: 8 Sayı: 1, 181–187. https://ajindex.com/articles/1152571

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Balan, KP. 2002. Failure Analysis of a Wire Rope. ASM Int., 3:71-74.
  2. Basak, D., Pal, S., Patranabis, DC. 2009. Inspection of 6x19 Seale Preformed Haulage Rope by Nondestructive Technique. Russ. J. Nondestruct+, 45(2):143-147.
  3. Chen, Y., Meng, F., Gong, X. 2016. Interwire Wear and Its Influence on Contact Behavior of Wire Rope Strand Subjected to Cyclic Bending Load. Wear, 368-368:470-484.
  4. de Silva, ART., Fong, LW. 2002. Effect of Abrasive Wear on the Tensile Strength of Steel Wire Rope. Eng. Fail. Anal., 9:349- 358.
  5. Fontanari, V., Benedetti, M., Monelli, BD. 2015. Elasto-Plastic Behavior of a Warrington-Seale Rope: Experimental Analysis and Finite Element Modeling. Eng. Struct., 82:113-120.
  6. Giglio, M., Manes, A. 2005. Life Prediction of a Wire Rope Subjected to Axial and Bending Loads. Eng. Fail. Anal., 12:549-568.
  7. Jun, M., Shi-rong, G., De-kun, Z. 2008. Distribution of Wire Deformation within Strands of Wire Ropes. J. China Uni. Mining Tech., 18:475-478.
  8. Kashyap, SK., Laxminarayna, G., Tewari, S., Sinha, A. 2005. Non-Destructive Testing of Steel Wire Ropes and Their Discard Criteria. The 8th Int. Conf. of the Sloven. Soc. for Nondestruc+, 229-235.
  9. Krishnadev, M., Larouche, M., Lakshmanan, VI., Sridhar, R. 2010. Failure Analysis of Failed Wire Rope. ASM Int., 10:341-348.
  10. Meknassi, M., Tijani, A., Mouhib, N., El Ghorba, M. 2016. Experimental Study on Corrosion of Wire Rope Strands under Sulfuric Acid Attack. Int. J. Eng. Sci. (IJES), 5(6):40-45.
  11. Singh, RP., Mallick, M., Verma, MK. 2016. Studies on Failure Behaviour of Wire Rope Used in Underground Coal Mines. Eng. Fail. Anal., 70:290-304.
  12. Urchegui, MA., Tato, W., Gomez, X. 2007. Wear Evolution in a Stranded Rope Subjected to Cyclic Bending. ASM Int., 15:1007-1017.
  13. Zhang, DK., Ge, SR., Qiang, YH. 2003. Research and Fatigue and Fracture Behavior due to Fretting Wear of Steel Wire in Hoisting Rope. Wear, 255:1233-1237.
  14. Hoist Rope. Eng. Fail. Anal., 4(1):25-38.