SavedAdd your journal

Journals / Bartın Orman Fakültesi Dergisi / 2018 / Cilt: 20 - Sayı: 2

Investigation of The Effect of Aging Time, Sanding and Cross Section on The Surface Quality of Fir Wood

Göknar Odunun Yüzey Kalitesi Üzerine Yaşlandırma Süresi, Zımparalama ve Kesit Yönü Etkisinin Araştırılması

Ferhat ÖZDEMİR
Doğu RAMAZANOĞLU
Ahmet TUTUŞ
Pages
194–204
Publication Date
2018-08-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the obtained data, the smoothest surfaces in the radial and tangential sections were observed in the samples exposed to iron acetate for 15 minutes, respectively, which were sanded with sanders 150 and 80, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, artificial aging with iron acetate ((CH3COO)2Fe) solution was applied to Fir wood and it was aimed to investigate effects of aging time, sanding number and cross section directions on surface roughness and color changes.
📊
Key Findings & Data:The surface roughness parameter values ​​were measured according to ISO 4287 standard and color measurement analyzes was performed according to ISO 2469 standard.
💡
Conclusion & Impact:According to the obtained data, the smoothest surfaces in the radial and tangential sections were observed in the samples exposed to iron acetate for 15 minutes, respectively, which were sanded with sanders 150 and 80, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Artificial Aging · Cross Section · Sanding

Abstract

In this study, artificial aging with iron acetate ((CH3COO)2Fe) solution was applied to Fir wood and it was aimed to investigate effects of aging time, sanding number and cross section directions on surface roughness and color changes. The surface roughness parameter values ​​were measured according to ISO 4287 standard and color measurement analyzes was performed according to ISO 2469 standard. According to the obtained data, the smoothest surfaces in the radial and tangential sections were observed in the samples exposed to iron acetate for 15 minutes, respectively, which were sanded with sanders 150 and 80, respectively.

Özet

Bu çalışmada, Göknar odununa demir asetat ((CH3COO)2Fe) çözeltisi ile yapay yaşlandırma işlemi uygulanmış ve yaşlandırma işlemine maruz bırakılma süresi, zımpara numarası ve kesit yönlerinin yüzey pürüzlülüğü ve renk değişimleri üzerine olan etkilerinin araştırılması amaçlanmıştır. Yüzey pürüzlülük parametre değerleri ISO 4287 standardına, renk ölçüm analizleri ISO 2469 standardına göre gerçekleştirilmiştir. Elde edilen verilere göre, radyal ve teğet kesitlerdeki en düzgün yüzeyler sırasıyla 150 ve 80 numaralı zımparalar ile zımpara işlemi uygulanan 15 dakika demir asetata maruz bırakılan numunelerde gözlemlenmiştir.

🔖

Cite This Article

ÖZDEMİR, F., RAMAZANOĞLU, D., TUTUŞ, A. (2018). Investigation of The Effect of Aging Time, Sanding and Cross Section on The Surface Quality of Fir Wood. Bartın Orman Fakültesi Dergisi, Cilt: 20 - Sayı: 2, 194–204. https://ajindex.com/articles/114337

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Yoshimoto T (1972). Photochemical Analysis of Wood and Related Substances. The Japan Wood Research Society (18):45–49.
  2. Winkelmann H, Badisch E, Roy M, Danninger H (2009b). Corrosion Mechanisms in the Wood İndustry, Especially Caused by Tannins Mater Corrosion, 60(1): 40-48.
  3. Tolvaj L, Molna´r S (2008). Photodegradation and Thermal Degradation of Outdoor Wood. In: Gril J (ed) Wood Science for Preservation of Cultural Heritage: Mechanical and Biological Factors. Braga, Portugal, 67–72.
  4. Unger A, Schniewind AP, Unger W (2001). Conservation of wood artifacts. Springer, Berlin. 26.Wagenfu¨hr R (2007). Holzatlas (Wood atlas), 6th edn. Fachbuchverlag, Leipzig. Winkelmann H, Badisch, E, Ilo S, Eglsaer S (2009a). Corrosion Behaviour of Tool Steels in Tannic Acids Mater. Corrosion, 60(3): 192. Strumbo DA (1963). Surface Texture. Measurement Methods. Forest Products Journal, 12(7): 299–303. 22. Singh PM, Anaya A, Frey K, Mahmood J (2001). Corrosivity of Black Liquors – role of Wood Species Pulped, in: Proceedings of the 10th International Symposium on Corrosion in the Pulp and Paper Industry, Helsinki, Finland. August 21–24.
  5. Singh PM, Anaya A (2007). Effect of Wood Species on Corrosion Behavior of Carbon Steel and Stainless Steels in Black Liquors Corros. Science, 49(2): 497-509.
  6. Rahim AA, Rocca E, Steinmetz J, Kassim MJ (2008). Inhibitive Action of Mangrove Tannins and Phosphoric Acid on Pre-Rusted Steel via Electrochemical Methods. Corrosion Science 50(6): 1546-1550
  7. Radojcic I, Berkovic K, Kovac S, Vorkapic-Furac J (2008). Natural Honey and Black Radish Juice as tin Corrosion İnhibitors Corrosion Science 50(5),1498-1504.
  8. Pugsley VA, Korn G, Luyckx S, Sockel HG, Heinrich W, Wolf M, feld H, Schulte R (2001). The İnfluence of a Corrosive Wood-cutting Environment on the Mechanical Properties of Hardmetal tools. International Journal of Refractory Metals and Hard Materials, 19(4-6): 311-318.
  9. Pugsley V, Corn G, Luyckx S, Sockel H (2002).
  10. On Localised Corrosive Attack, Stress Corrosion Cracking and Corrosion Fatigue Effects in a Hardmetal Cutting-tool Material. Zeitschrift für Metallkunde: 93(7): 745-749.
  11. Peters CC, Cumming JD (1970). Measuring Wood. Surface Smoothness: A Review, Forest Products Journal, 20(12): 40–43
  12. Örs Y, Baykan İ (1999). Masif Ağaç Malzemede Rendeleme ve Zımparalamanın Yüzey Pürüzlülüğüne Etkileri. Turkey Journal of Agriculture and Forestry, 23(3): 577-582.
  13. Nilsson T, Daniel G (1990) Structure and the Aging Process of Dry Archaeological Wood. In: Rowell