Journals / Bilimsel Madencilik Dergisi / 2021 / Cilt: 60 Sayı: 4

Investigation of the physico - chemical structures and production possibilities of the salt extracted by the evaporation method from Acıgöl

Acıgöl’den evaporasyon yöntemi ile çöken tuzların fiziko - kimyasal yapıları ve üretim olanaklarının incelenmesi

Mahmut Eser(Alkim Alkali Kimya AŞ Koralkim Tesisleri)0000-0003-0723-3061
Zehra Ebru Sayın(AFYON KOCATEPE ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0003-1949-3127
Pages
191–196
Publication Date
2021-12-21
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In other words; It has been determined that 9,751 kg of KCl and 30,055 kg of MgSO4 can be obtained from 1m3 of above-salt solution, and it has been concluded that it is possible to convert these products into products with high added value.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; After obtaining sodium chloride and sodium sulfate from the lake water, the above-salt solution discharged into the lake was examined in terms of its content and the production possibilities of the potassium and magnesium salts that Acıgöl contains were investigated.
📊
Key Findings & Data:At the end of the study; The amount of salt precipitated in the solution brought from 37 Bé to 38.7 Bé is 119.59 g and the KCl ratio in this salt is 16.80% and the MgSO4 ratio is 51.80%.
💡
Conclusion & Impact:In other words; It has been determined that 9,751 kg of KCl and 30,055 kg of MgSO4 can be obtained from 1m3 of above-salt solution, and it has been concluded that it is possible to convert these products into products with high added value.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:ACIGÖL · POTASYUM · MAGNEZYUM

Abstract

In this study; After obtaining sodium chloride and sodium sulfate from the lake water, the above-salt solution discharged into the lake was examined in terms of its content and the production possibilities of the potassium and magnesium salts that Acıgöl contains were investigated. At the end of the study; The amount of salt precipitated in the solution brought from 37 Bé to 38.7 Bé is 119.59 g and the KCl ratio in this salt is 16.80% and the MgSO4 ratio is 51.80%. In other words; It has been determined that 9,751 kg of KCl and 30,055 kg of MgSO4 can be obtained from 1m3 of above-salt solution, and it has been concluded that it is possible to convert these products into products with high added value.

Özet

Bu çalışmada; sodyum klorür ve sodyum sülfatın göl suyundan elde edilmesinin ardından göle deşarj edilen tuz üstü çözelti içerik bakımından incelenerek Acıgöl'ün ihtiva ettiği potasyum ve magnezyum içerikli tuzlarının üretilebilme olanakları araştırılmıştır. Çalışma sonunda; 37 Bé den 38,7 Bé’ye getirilen çözeltide çöken tuz miktarı 119,59 g ve bu tuzdaki KCl oranı %16,80 ve MgSO4 oranı ise %51,80’dir. Bir başka deyişle; 1m3 tuz üstü çözeltisinden 9,751 kg KCl ve 30,055 kg MgSO4 elde edilebileceği tespit edilerek, bu ürünlerin katma değeri yüksek ürünlere dönüştürülmesinin mümkün olduğu sonucuna varılmıştır.

🔖

Cite This Article

Sayın, Z. E. (2021). Investigation of the physico - chemical structures and production possibilities of the salt extracted by the evaporation method from Acıgöl. Bilimsel Madencilik Dergisi, Cilt: 60 Sayı: 4, 191–196. https://doi.org/10.30797/madencilik.905654

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Eser, M., 2019. Acıgöl’den Potasyum - Magnezyum Tuzları ve Lityum Üretim Olanaklarının İncelenmesi, Yüksek Lisans Tezi. Afyon Kocatepe Üniversitesi, Fen Bilimleri Enstitüsü, 113 sf.
  2. Ghosh, P. K., Langalia, K. J., Gandhi, M. R., Dave, R. H., Joshi, H. L., Vohra, R. N., ve Mohandas, V. P., Halder, K., Deraiya, H. H., Rathod, R. D. and Hamidani, A. U., 2006. US Patent No. 7041268. Washington, DC: U.S. Patent and Trademark Office.
  3. Sadan, A,. 1979. US Patent No. 4140747. Washington, DC: U.S. Patent and Trademark Office.
  4. Thomsen, K., Rasmussen, P. ve Gani, R., 1998. Simulation and Optimization of Fractional Crystallization Processes, Chemical Engineering Science, 53(8): 1551-1564.