Journals / Maden Tetkik ve Arama Dergisi / 2026 / Cilt: 168 Sayı: 168

Mud systems applied to problematic formations in core drilling rigs

Bülent Toka(MTA Genel Müdürlüğü Sondaj Dairesi)0000-0003-0592-4336
Pages
67–75
Publication Date
2022-08-18
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Salt mud also minimized the formation of cake in the pipe.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The two most important features of drilling rigs based on the core drilling principles are the drill set rotating at high speeds and the very precise spacing between the pipe and the well wall.
📊
Key Findings & Data:The spilled formation pieces cause an excessive solid material increase in the mud structure and due to the effect of centrifugal force, the solids adhere to the inner wall of the pipes near the surface and form a cake.
💡
Conclusion & Impact:Salt mud also minimized the formation of cake in the pipe.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Diamond Drilling · Drilling Mud · Problematic Formations

Abstract

The two most important features of drilling rigs based on the core drilling principles are the drill set rotating at high speeds and the very precise spacing between the pipe and the well wall. Formation pieces that swell, flow into the well, spill or collapse during the drilling of problematic formations mix into the mud or narrow the annulus and cause well problems by restraining the rotation of the drill string and circulation. The spilled formation pieces cause an excessive solid material increase in the mud structure and due to the effect of centrifugal force, the solids adhere to the inner wall of the pipes near the surface and form a cake. Excessive cake thickness in the pipes obstruct the descent of the core barrel inner tube catcher into the well. During the removal of the inner tube, a vacuum occurs in the well due to the mud discharged from the rod and the problematic formations are poured into the annulus and block the core between the core barrel and the well wall. In this study, the performance of mud systems determined by trial and error method against the problems encountered in unconsolidated claystone, mudstone (shale), siltstone and sand - pebble stones in core coal exploration drillings in Çorum - Amasya region were evaluated. Monitoring and regular improvement of the rheological values of the mud compositions, changing the mud composition according to the well conditions, keeping the gel strength high and increasing its density with salt was found to play an important role in keeping the unconsolidated formations physically balanced. Salt mud also minimized the formation of cake in the pipe.

🔖

Cite This Article

Toka, B. (2022). Mud systems applied to problematic formations in core drilling rigs. Maden Tetkik ve Arama Dergisi, Cilt: 168 Sayı: 168, 67–75. https://doi.org/10.19111/bulletinofmre.970177

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Cario R. D., Bagshaw, F. R. 1978. Description and use of polymers used in drilling, workovers, and completion. The Society of Petroleum Engineers Production Technology Symposium, 30 October 1978, Hobbs, Mexico.
  2. Darley, H. C. H., Gray, G. R. 1988. Composition and Properties of Drilling and Completion Fluids 5th Edition, Elsevier Inc., 643.
  3. Luckham, P. F., Rossi, S. 1999. The Colloidal and rheological properties of bentonite suspensions, Advances in Colloid and Interface Science, 82, 43-92.
  4. M-I Drilling Fluids, L. C. 1998. Drilling Fluids Engineering Manual.
  5. Özbayoğlu, Y. 1983. Elmaslı Sondaj Tekniği El Kitabı. TMMOB Jeoloji Mühendisleri Odası, Ankara.
  6. Toka, B. 2017. Sondaj Mühendisliği. TMMOB Maden Mühendisleri Odası, Ankara.
  7. Toka, B., Şahin, M. 2006. Havza jeotermal sahasında yapılan SH - 5 ve diğer sondajların genel değerlendirmesi. Maden Mühendisleri Odası Madencilik Dergisi, 45(1), 3-14.
  8. Toka, N., Tan, S., Çalışkan, O., Güngör, Y., Toka, B. 2016. Sondaj çamuru araştırma - geliştirme projesi laboratuvar çalışmaları. MTA Sondaj Dairesi, Ankara (unpublished).
  9. TS EN ISO 13500. 2010. Petrol ve doğal gaz sanayi - sondaj akışkanı maddeleri - özellikler ve deneyler. Türkiye Standartları Enstitüsü, Ankara.