SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2012 / Volume: 22 Issue: 4

POTENTIAL USE OF NEW METHODS FOR IDENTIFICATION OF HOLLOW POLYESTER FIBRES

Esen Özdoğan(Ege University, Textile Engineering Department)
Ebru Bozacı(Ege University, Textile Engineering Department)
Buket Arık(Ege University, Textile Engineering Department)
Aslı Demir(Ege University, Emel Akın Vocational High School)
Pages
—
Publication Date
2012-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Today, manufactured textile fibres have many types of chemical structures and finishes and the majority of production processes

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Today, manufactured textile fibres have many types of chemical structures and finishes and the majority of production processes
📊
Key Findings & Data:Today, manufactured textile fibres have many types of chemical structures and finishes and the majority of production processes
💡
Conclusion & Impact:Today, manufactured textile fibres have many types of chemical structures and finishes and the majority of production processes
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hollow polyester fibers · SEM · FT-IR

Abstract

Today, manufactured textile fibres have many types of chemical structures and finishes and the majority of production processes

🔖

Cite This Article

Özdoğan, E., Bozacı, E., Arık, B., Demir, A. (2012). POTENTIAL USE OF NEW METHODS FOR IDENTIFICATION OF HOLLOW POLYESTER FIBRES. Tekstil ve Konfeksiyon, Volume: 22 Issue: 4. https://ajindex.com/articles/1111620

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (27)

  1. Hu J, 2008, “Fabric testing”, Woodhead Publishing in Textiles, Number 76, Textile Institute, Cambridge, 424.
  2. Seventekin N, 2010, “Chemical Textile Examinations”, Ege University Textile and Apparel Research Center, Izmir, Number 33, 81.
  3. Seventekin N, 2001, “Chemical Fibres”, Ege University Textile and Apparel Research Center, Izmir, Number 1, 134.
  4. Horrocks AR, Anand SC, 2004, “Handbook of technical textiles”, Woodhead Publishing Limited in association with The Textile Institute, UK, 576.
  5. Weaver JW, 1984, “Analytical methods for a textile laboratory”, American Association of Textile Chemists and Colorists, N.C., 394
  6. http://www.sdm.buffalo.edu/scic/sem-eds.html Access date (07.07.2011)
  7. www.glafo.se Access date (07.07.2011)
  8. Lieven MKV, Steffen M, Breyta G, Yannoni CS, Sherwood MH, Chuang IL, 2001 "Experimental realization of Shor's quantum factoring algorithm using nuclear magnetic resonance", Nature, 414, 883-887.
  9. Linnemann B, Steffens M, Rohs M, Gries, T, 2005, “Quality Control For Man-Made Fibers”, Chemical Fibers International, 55 (1), 50-56.
  10. Gardiner DJ, 1989, “Practical Raman Spectroscopy”, Graves PR, Springer-Verlag. 276.
  11. http://en.wikipedia.org Access date (07.07.2011)
  12. Mansfield E, Kar A, Quinn TP, and Hooker SA, 2010, "Quartz Crystal Microbalances for Microscale Thermogravimetric Analysis", Analytical Chemistry: 101116152615035.
  13. Schindler W, and Finnimore E, 2005, “Chemical analysis of damage to textiles”, Chemical Testing of Textiles, Woodhead Publishing, Cambridge, UK, 145–241.
  14. Skoog DA, Holler FJ, and Nieman T, 1998, “Principles of Instrumental Analysis” New York, 805–808.
  15. Dean JA, 1995, “The Analytical Chemistry Handbook”, McGraw Hill, Inc., New York, 1280.
  16. Griffiths P, and Hasseth JA, 2007, “Fourier Transform Infrared Spectrometry”, Wiley-Blackwell, 100.
  17. Partini M, and Pantani R, 2007, “Determination of crystallinity of an aliphatic polyester by FTIR spectroscopy”, Polymer Bulletin, 59, 403–412.
  18. Koç S. K, and Hockenberger A.Ş., 2010, Investigation of Air-Jet Texturing of Technical Polyester Yarns, Tekstil ve Konfeksiyon, 4, 299-305.
  19. Edwards JV, Buschle-Diller G, and Goheen SC, 2006, “Modified Fibers with Medical and Specialty Applications”, Springer, 91-125.
  20. Khoddami A, Carr CM, and Gong RH, 2009, “Effect of Hollow Polyester Fibres on Mechanical Properties of Knitted Wool/Polyester Fabrics”, Fibers and Polymers, 10 (4), 452-460.
  21. Omeroglu S, Karaca E, and Becerir B, 2010, “Comparison of Bending, Drapability and Crease Recovery Behaviors of Woven Fabrics Produced from Polyester Fibers Having Different Cross-sectional Shapes”, Textile Research Journal, 80 (12), 1180–1190.
  22. Tsen WC, Hsiao KJ, and Shu YC, 2009, “Kinetics of Alkaline Hydrolysis and Morphologies of Novel Poly(ethylene terephthalate) Micro-Porous Hollow, Fibers and Functional Characteristics of Fabrics”, Journal of Applied Polymer Science, 113, 1822–1827.
  23. Scheirs J, and Long TE, 2003, “Modern Polyesters, Chemistry and Technology of Polyesters and Copolyesters”, John Wiley and Sons Ltd., 401-433.
  24. Lecomte HA, and Liggat JJ, 2008, “Commercial fire-retarded PET formulations Relationship between thermal degradation behaviour and fire-retardant action”, Polymer Degradation and Stability, 93, 498-506.
  25. Karaca E, and Ozcelik F, 2007, “Influence of the Cross-Sectional Shape on the Structure and Properties of Polyester Fibers”, Journal of Applied Polymer Science, 103, 2615–2621.
  26. Li WD, and Ding EY, 2007, “Preparation and Characterization of Poly(ethylene terephthalate) Fabrics Treated by Blends of Cellulose Nanocrystals and Polyethylene Glycol”, Journal of Applied Polymer Science, 105, 373–378.
  27. Zhang W, Yi X, Sun X, and Zhang Y, 2008, “Surface modification of non-woven poly (ethylene terephthalate) fibrous scaffoldfor improving cell attachment in animal cell culture”, J Chem Technol Biotechnol, 83, 904–911.