SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2012 / Volume: 22 Issue: 4

THE INFLUENCE OF RHEOLOGICAL PROPERTIES OF THE PRETREATMENT THICKENERS ON INK-JET PRINTING QUALITY

Deniz Onar Çatal
Arif Taner Özgüney(Ege University, Textile Engineering Department)
E. Perrin Akçakoca Kumbasar(Ege University, Textile Engineering Department)
Pages
—
Publication Date
2012-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Pretreatment solutions that is transferred to the cotton fabric

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Pretreatment process is very important for ink jet printing system.
📊
Key Findings & Data:Pretreatment process is very important for ink jet printing system.
💡
Conclusion & Impact:Pretreatment solutions that is transferred to the cotton fabric
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Ink-jet printing · Rheological properties · Thickeners

Abstract

Pretreatment process is very important for ink jet printing system. Pretreatment solutions that is transferred to the cotton fabric

🔖

Cite This Article

Çatal, D. O., Özgüney, A. T., Kumbasar, E. P. A. (2012). THE INFLUENCE OF RHEOLOGICAL PROPERTIES OF THE PRETREATMENT THICKENERS ON INK-JET PRINTING QUALITY. Tekstil ve Konfeksiyon, Volume: 22 Issue: 4. https://ajindex.com/articles/1111619

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Tippett B. G., 2002, “The Evolution And Progression Of Digital Textile Printing”, AATCC, http://www.brookstippett.com/docs/Print2002-BGT.pdf (Access Date: 10 December 2011).
  2. Özgüney. A. T., Özerdem. A. and Özkaya. K., 2007, “Ön Terbiye İşlemlerinin Parça Baskı Prosesi Sırasında Meydana Gelen Sararma Üzerine Etkileri”, Tekstil ve Konfeksiyon Dergisi, Vol: 17(1), 45p.
  3. Provost, J., 2009, “Ink Jet Printing on Textiles” http://provost-inkjet.com/resources/ Ink+Jet+Printing+on+Textiles.pdf (Access Date: 10 December 2011)
  4. George B., Govindaraj M., Ujiie H., Wood D., Freeman H., Hudson S. and El-Shafei, A., 2003, “Integration of Fabric Formation and Coloration Processes”, NTC Project: C02-PH03, 10p.
  5. Tyler D.J., 2005, “Textile Digital Printing Technologies“, Textile Progress, Vol: 37(4):58p.
  6. Boger D. V. and Walters K., 1993, “Rheological Phenomenia in Focus”, Elsevier, Amsterdam, Netherland, 1-10pp.
  7. Barnes H. A., Hutton J. F. and Walters K., 1989, “An Introduction to Rheology”, Elsevier, Amsterdam, 1-35pp.
  8. Laba D., 1993, “Rheological Properties of Cosmetics and Toiletries”, Cosmetic Science and Technology Series, 13, 35-54pp.
  9. Akçakoca E. P., 2005, “Paste Add-on and Penetration Values of High and Low Viscosity Alginate, AATCC Review, International Magazine For Textile Design And Testing, Vol: 5(6), 17-22pp.
  10. Akçakoca Kumbasar E. P., 2007, “Mixture Printing Pastes from High Substitued Guar Gum and Alginates on Reactive Printing of Viscose”, Journal of Applied Polymer Science, Vol: 103(2), 745-751pp.
  11. Turk S. S. and Schneider R., 2000, “Printing of a High Substituted Guar Gum and Its Mixture With Alginate”, Dyes and Pigments, Vol: 47(3), 269-275pp.
  12. Parys M. and Garez I., 2002, “The Future Printing Will Be Digital”, Melliand China, Vol: 3, 1-2pp.
  13. Fijan R., Basile M., Lapasin R. and Turk S. S., 2009, “Rheological Properties of Printing Pastes and Their Influence on Quality-Determining Parameters in Screen Printing of Cotton With Reactive Dyes Using Recycled Polysaccharide Thickeners”, Carbohydrate Polymers, Vol:78(1), 25-35pp.
  14. Özgüney A. T. and Sarıkaya E., 2000, “Terbiye İşletmesindeki Baskı Hatalarının Sayısal Verilerle Analizi Üzerine Bir Araştırma”, Tekstil ve Konfeksiyon Vol: 10(5), 129p.
  15. Tyler D.J., 2005, “Textile Digital Printing Technologies“, Textile Progress, Vol: 37(4):58p.