Journals / Tekstil ve Konfeksiyon / 2012 / Volume: 22 Issue: 4

PREPERATION AND MECHANICAL PROPERTIES OF WOVEN FABRIC REINFORCED ALL POLYPROPYLENE COMPOSITES

Mohammad Abdorazaghı(Islamic Azad University, Science and Research Branch, Textile Engineering Department)
Saeed Shaıkhzadeh Najar(Amirkabir University of Technology, Textile Engineering Department,)
Ahmad Arefazar(Amirkabir University of Technology, Polymer Engineering Department, Tehran)
Pages
—
Publication Date
2012-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the present work, all polypropylene composites were prepared by film stacking technique using terpolymer and copolymer

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the present work, all polypropylene composites were prepared by film stacking technique using terpolymer and copolymer
📊
Key Findings & Data:In the present work, all polypropylene composites were prepared by film stacking technique using terpolymer and copolymer
💡
Conclusion & Impact:In the present work, all polypropylene composites were prepared by film stacking technique using terpolymer and copolymer
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Woven fabric · All polypropylene composite · Mechanical properties

Abstract

In the present work, all polypropylene composites were prepared by film stacking technique using terpolymer and copolymer

🔖

Cite This Article

Abdorazaghı, M., Najar, S. S., Arefazar, A. (2012). PREPERATION AND MECHANICAL PROPERTIES OF WOVEN FABRIC REINFORCED ALL POLYPROPYLENE COMPOSITES. Tekstil ve Konfeksiyon, Volume: 22 Issue: 4. https://ajindex.com/articles/1111616

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (28)

  1. Ward, I., M., Hine, P., J., “Novel composites by hot compaction of fibers”, 1997, Polym. Eng. Sci., 37, 1809–14.
  2. Hine, P., J., Ward, I., M., “The hot compaction of woven polypropylene tape”, 1998, Journal of Material Science, 33, 2725-2733.
  3. Hine, P., J., et al., “Hot compacted polypropylene sheet”, 1998, Plastics Rubber and Composites Processing and Applic., 27, 167–171.
  4. Ward, I., M., “Developments in oriented polymers”, 2004, Plast. Rubber Composite, 33, 189–194.
  5. Ward, I., M., Hine P., J., “The science and technology of hot compaction”, 2004, Polymer, 45, 1413–27.
  6. Hine, P., J., Bassett, D., “The hot compaction behavior of woven oriented polypropylene fibers and tapes I. Mechanical properties”, 2003, Polymer, 44, 1117–31.
  7. Peijs, T., “Composites for recyclability”, 2003, Mater. Today, 6, 30–35.
  8. Cabrera N., Alcock, B., “Processing of all-polypropylene composites for ultimate recyclability”, 2004, Proc. Instn. Mech. Engrs. Part L. J. Materials: Design and Applications, 218, 145-155.
  9. Alcock, B., Cabrera, N., Peijs, T., “The mechanical properties of unidirectional all-polypropylene composites”, 2006, Composite Part A, 37, 716–26.
  10. Alcock, B., et al., “Low velocity impact performance of recyclable all-polypropylene composites”, 2006, Compos. Sci. Technol., 66, 1724–37.
  11. Alcock, B., Cabrera, N., “The mechanical properties of woven tape all-polypropylene composites”, 2007, Composites: Part A, 38, 147–161.
  12. Alcock, B., et al., “Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all-polypropylene composites”, 2007, J. Appl. Polym. Sci., 104, 118–29.
  13. Alcock, B., et al., “The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and allpolypropylene composites”, 2007, Compos. Sci. Technol., 67, 2061–70.
  14. Alcock, B., et al. “The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites”, 2008, Composite Part B, 39, 537–47. 292 TEKSTİL ve KONFEKSİYON 4/2012
  15. Hine, P., J., Olley, R., Ward, I., M., “The use of interleaved films for optimizing the production and properties of hot compacted self reinforced polymer composites”, 2008, Compos. Sci. Technol., 68, 1413–21.
  16. Houshyar, S., Shanks, R., A., Hodzic, A., M., “Influence of different woven geometry in poly(propylene) woven composites”, 2005, Macromol. Mater. Eng., 290, 45–52.
  17. Houshyar, S., Shanks, R., A., Hodzic, A., M., “Mechanical and Thermal Properties of Flexible Poly(propylene) Composites”, 2006, Macromol. Mater. Eng., 291, 59–67.
  18. Bárány, T., Izer, A., Czigány, T., “On consolidation of self-reinforced polypropylene composites”, 2006, Plast Rubber Composite, 35, 375–379.
  19. Bárány, T., Izer, A., Czigány, T., “High performance self-reinforced polypropylene composites ”, 2007, Mater. Sci. Forum, 537, 121–128.
  20. Abraham, T., N., Siengchin, S., “Dynamic mechanical thermal analysis of all-PP composites based on b and a polymorphic forms”, 2008, J. Mater. Sci., 43, 3697–3703.
  21. Abraham, T., N., “Tensile mechanical and perforation impact behavior of all-PP composites containing random PP copolymer as matrix and stretched PP homopolymer as reinforcement: Effect of b nucleation of the matrix”, 2009, Composites: Part A, 40, 662–668.
  22. Izer, A., Bárány, T., Varga, J., “Development of woven fabric reinforced all-polypropylene composites with beta nucleated homo- and copolymer matrices”, 2009, Composites Science and Technology, 69, 2185–2192.
  23. Bárány, T., Izer, A., Karger-Kocsis, J., “Impact resistance of all-polypropylene composites composed of alpha and beta modifications”, 2009, Polymer Testing, 28, 176–182.
  24. Izer, A., Bárány, T., “Hot consolidated all-PP composites from textile fabrics composed of isotactic PP filaments with different degrees of orientation”, 2007, Express Polymer Letters, 11, 790–796.
  25. Bárány, T., Karger- Kocsis, J., Cziga´ny, T., “Development and characterization of self-reinforced poly(propylene) composites carded mat reinforcement”, 2006, Polym. Adv. Technol., 17, 818–824.
  26. Houshyar, S., Shanks, R., A., “Morphology thermal and mechanical properties of poly(propylene) fibre–matrix composites”, 2003, Macromol. Mater. Eng., 288, 599–606.
  27. Houshyar, S., Shanks, R., A., Hodzic, A., “The effect of fiber concentration on mechanical and thermal properties of fiber-reinforced polypropylene composites”, 2005, J. Appl. Polym. Sci., 96, 2260–72.
  28. Banik, K., Abraham T.,N., Karger-Kocsis, J., “Flexural Creep Behavior of Unidirectional and Cross-Ply All-Poly(propylene) (PURE) Composites”, 2007, Macromol. Mater. Eng., 292, 1280-1288.