This paper presents some results concerning the correlation between the heat- sealed parameters and some characteristics of a doubled ensemble (the detachment capacity, wrinkling recurrence and rigidity) by taking into account the direction by which the adhesive material is attached to the base one
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In the manufacturing process, the heat-sealed treatment is an important step, because it contributes to the shape of the product and to dimensional stability during its use.
📊
Key Findings & Data:In the heat- sealed treatment it is important to choose the proper values of pressure and temperature, correlated with the time needed for each phase, because the adhesive temperature increases as the surface temperature of the base material rises.
💡
Conclusion & Impact:This paper presents some results concerning the correlation between the heat- sealed parameters and some characteristics of a doubled ensemble (the detachment capacity, wrinkling recurrence and rigidity) by taking into account the direction by which the adhesive material is attached to the base one
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Heat-sealed parameters · Capacity of detachment · Rigidity
Abstract
In the manufacturing process, the heat-sealed treatment is an important step, because it contributes to the shape of the product and to dimensional stability during its use. In the heat- sealed treatment it is important to choose the proper values of pressure and temperature, correlated with the time needed for each phase, because the adhesive temperature increases as the surface temperature of the base material rises. This paper presents some results concerning the correlation between the heat- sealed parameters and some characteristics of a doubled ensemble (the detachment capacity, wrinkling recurrence and rigidity) by taking into account the direction by which the adhesive material is attached to the base one
Dulgherıu, I., Avadaneı, M., Cozmancıuc, C. (2014). RESEARCH CONCERNING THE HEAT-SEALED TREATMENT PARAMETERS INFLUENCE ON THE MAIN CHARACTERISTICS OF A DOUBLED ENSEMBLE. Tekstil ve Konfeksiyon, Volume: 24 Issue: 4. https://ajindex.com/articles/1111569
Erdogan, M.C., Kansoy, O., Dirgar, E., The relations of check dimensions fabric consumption, Tekstil ve Konfeksiyon, Volume 58, Issue 5, May 2009, Pages 175-185
Hes, L., Ursache, M., Effect of composition of knitted fabrics on their cooling efficiency at simulated sweating, Indian Journal of Fibre and Textile Research, 36, (3), pp 281-284, 2011
Hoblea, N., Hoblea, Z., Aprecierea calităţii procesului de termolipire. CORTEP XII 2002.
Kishore, R.A., Tiwari, R., Dvivedi, A. and Singh, I., 2009, Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites, Materials and Design, Vol. 30, pp 2186 – 2190
Loghin, C., Ursache, M. and Ionescu,I., 2010, Experimental research on the sewability of ferromagnetic micro-wires, Tekstil ve Konfeksiyon, Volume 20, Issue 4, pp. 373-378, 2010
Loghin, C., Ursache, M., Muresan, R., Muresan, A., Surface treatments applied to textile materials and implications on their behaviour in wet conditions, Industria Textila, Volume 61, Issue 6, pp.284-290, 2010
Marmarali, A., Dönmez Kretzschmar, S., Ozdil, N., Gülsevin Oğlakcioğlu, N., Parameters that affect thermal comfort of garment, Tekstil ve Konfeksiyon Vol. 04/2006, pp: 241-246.
Mitu, S., Hancu, S.P., Matenciuc,C.C., Barladeanu, E., The limits of the sanogenetic indexes for vestimentary assemblies having new structural peculiarities, Industria Textila, Volume 59, Issue 1, pp.14-25, 2008
Mitu, S., Mitu, M. Bazele tehnologiei confecţiilor textile vol.I şi II. Editura “Performantica” Iaşi 2005
Oglakcioglu, N., Marmarali A., Thermal comfort properties of cotton knitted fabrics in dry and wet states, Tekstil ve Konfeksiyon, Vol. 20, Issue: 3, pp: 213-217, 2010
Pamuk, G. and Ceken, F., 2013, Comparison of the mechanical behaviour spacer knit cotton and flax fabric reinforced composites, Industria Textila, Nr: 1/2013, ISSN 1222-5347.
Hes, L., Ursache, M., Effect of composition of knitted fabrics on their cooling efficiency at simulated sweating, Indian Journal of Fibre and Textile Research, 36, (3), pp 281-284, 2011
Loghin, C., Ursache, M. and Ionescu,I., 2010, Experimental research on the sewability of ferromagnetic micro-wires, Tekstil ve Konfeksiyon, Volume 20, Issue 4, pp. 373-378, 2010
Mitu, S., Hancu, S.P., Matenciuc,C.C., Barladeanu, E., The limits of the sanogenetic indexes for vestimentary assemblies having new structural peculiarities, Industria Textila, Volume 59, Issue 1, pp.14-25, 2008
Oglakcioglu, N., Marmarali A., Thermal comfort properties of cotton knitted fabrics in dry and wet states, Tekstil ve Konfeksiyon, Vol. 20, Issue: 3, pp: 213-217, 2010