Journals / Tekstil ve Konfeksiyon / 2017 / Volume: 27 Issue: 4

INVESTIGATION OF DEXTERITY, MECHANICAL PROPERTIES, AND BURNING BEHAVIOR OF PROTECTIVE GLOVES PRODUCED WITH HIGH PERFORMANCE YARNS

YÜKSEK PERFORMANSLI İPLİKLERLE ÜRETİLMIŞ KORUYUCU ELDİVENLERİN MAHARET, MEKANIK ÖZELLİKLERİ VE YANMA DAVRANIŞLARININ İNCELENMESİ

Pages
—
Publication Date
2017-12-27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that blending of 5% para-aramid fibers with meta-aramid fibers reduce shrinkage of the fabric and prevents the fabric break-opening during flame exposure as well as improving the cut, tear and puncture resistance of the gloves.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Using protective gloves is the most efficient way to reduce accidents at workplace because hands are often exposed to injuries.
📊
Key Findings & Data:To reduce weight and thickness and to improve the dexterity and protection from injuries, gloves are now being made from high performance yarns.
💡
Conclusion & Impact:It was observed that blending of 5% para-aramid fibers with meta-aramid fibers reduce shrinkage of the fabric and prevents the fabric break-opening during flame exposure as well as improving the cut, tear and puncture resistance of the gloves.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Protective gloves · aramid fibers · EN 388

Abstract

Using protective gloves is the most efficient way to reduce accidents at workplace because hands are often exposed to injuries. To reduce weight and thickness and to improve the dexterity and protection from injuries, gloves are now being made from high performance yarns. In this study para-aramid, meta-aramid, and 95/5% meta-aramid/para-aramid yarns were used to manufacture protective gloves on a 13 Gauge glove knitting machine. Dexterity test was carried out as proposed in EN 420 standard and mechanical risks such as cut, puncture, tear and abrasion were determined according to EN 388. The burning behavior of the gloves was measured in accordance with EN ISO 15025. The results revealed that para-aramid gloves are offering the highest protective performance. The dexterity of all the gloves performed the highest level. It was observed that blending of 5% para-aramid fibers with meta-aramid fibers reduce shrinkage of the fabric and prevents the fabric break-opening during flame exposure as well as improving the cut, tear and puncture resistance of the gloves.

Özet

Çalışma yerlerinde sürekli iş kazalarına maruz kalan ellerimizi korumanın en etkili yolu koruyucu eldiven kullanmaktır. Günümüzde eldivenler, hafif ve ince olmalarıyla el maharetini geliştiren ve yaralanmalardan koruyan yüksek performanslı ipliklerle üretilmektedir. Bu çalışmada para-aramid, meta-aramid ve %95/5 meta-aramid/para-aramid karışımıyla üretilmiş iplikler kullanılarak 13G eldiven makinasında eldivenler üretilmiştir. Kesme, delinme, yırtılma ve aşınma dayanımı gibi mekanik riskler EN 388 standardına uygun olarak ölçülmüştür. Ayrıca eldivenlerin mahareti ve yanma davranışları sırasıyla EN420 ve EN ISO 15025 standartlarına göre incelenmiştir. Test sonuçlarına göre para-aramid eldivenler en yüksek koruyucu performansı göstermiştir. Para-aramid liflerinin %5 olarak meta-aramid lifleriyle harmanlanması aleve maruz bırakıldığında kumaştaki büzülmeyi azaltarak kumaş kırılması ve açılmalarını önlemiştir. Bunun yanı sıra kesme, delinme ve yırtılma dayanımı değerlerinde iyileşme gözlenmiştir. Üretilen tüm eldivenler maharet testinde en yüksek seviyeyi yakalamıştır.

🔖

Cite This Article

Ertekin, M. (2017). INVESTIGATION OF DEXTERITY, MECHANICAL PROPERTIES, AND BURNING BEHAVIOR OF PROTECTIVE GLOVES PRODUCED WITH HIGH PERFORMANCE YARNS. Tekstil ve Konfeksiyon, Volume: 27 Issue: 4. https://ajindex.com/articles/1111385

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (94)

  1. İş sağlığı ve güvenliği, Available from: https://goo.gl/Lviomi (Accessed at 05.06.2017)
  2. İş kazalarında Avrupa birincisiyiz, Available from: https://goo.gl/a9Bi7f (Accessed at 12.06.2017)
  3. T.C. Sosyal Güvenlik Kurumu iş kazaları, SGK istatistikleri, Available from: www.ssk.gov.tr (Accessed at 12.06.2017)
  4. Davas Aksan, A., Durusoy, R., Bal, E., Kayalar, M., Ada, S. and Tanık, F. A., 2012, “Risk factors for occupational hand injuries: Relationship between agency and finger”, Am. J. Ind. Med., 55: 465–473
  5. Hertz, R. P.; Emmett, E. A., 1986, “Risk factors for occupational hand injury”, J Occup Med, Vol. 28, No 1, 1986, p. 36-41
  6. Sorock, G. S.; Lombardi, D. A.; Peng, D. K.; Hauser, R.; Eisen, E. A.; Herrick, R. F.; Mittleman, M. A., 2004a, “Glove use and the relative risk of acute hand injury: a case-crossover study”, Journal of Occupational and Environmental Hygiene, Vol. 1, No 3, p. 182-190
  7. Sorock, G. S.; Lombardi, D. A.; Hauser, R.; Eisen, E. A.; Herrick, R. F.; Mittleman, M. A., 2004b, “A case-crossover study of transient risk factors for occupational acute hand injury”, Occup Environ Med, Vol. 61, No 4, p.305-311
  8. Bradley, J. V., 1969, “Glove characteristics influencing control manipulability”, Human Factors, Vol. 11, No 1, p. 21-36
  9. Bradley, J. V., 1969, “Effect of gloves on control operation time”, Human Factors, Vol. 11, no1, 1969, p. 13-20
  10. Bishu, R. R.; Klute, G.; Kim, B., 1993, The Effects of Extra Vehicular Activity (EVA) Gloves on Dexterity and Tactility. Designing for Diversity. The Human Factors and Ergonomics Society, Vol. 2, p.826-830
  11. Brunick, A. L.; Burns, S.; Gross, K.; Tishk, M.; Feil, P., 1990, “Comparative study: the effects of latex and vinyl gloves on the tactile discrimination of first year dental hygiene students”, Clinical Preventive Dentistry, Vol. 12, No 2, p. 21-25
  12. Chandler, N. P.; Bloxham, G. P., 1990, “Effect of gloves on tactile discrimination using an endodontic model”, Int Endod.J, Vol. 23, No 2, p. 97-99
  13. Woods, J. A.; Leslie, L. F.; Drake, D. B.; Edlich, R. F., 1996, “Effect of puncture resistant surgical gloves, finger guards, and glove liners on cutaneous sensibility and surgical psychomotor skills”, J Biomed Mater Res, Vol. 33, No 1, p. 47-51
  14. Kinoshita, H., 1999, “Effect of Gloves on Prehensile Forces during Lifting and Holding Tasks”, Ergonomics, Vol. 42, No 10, p. 1372-1385
  15. Bellingar, T. A.; Slocum, A. C., 1993, “Effect of Protective Gloves on Hand Movement: An Exploratory Study”, Applied Ergonomics, Vol. 24, No 4, p. 244-250
  16. Gauvin C., Lara J., 2013, “Worker Evaluation of Manual Dexterity, Tactile Sensitivity and Comfort When Wearing Needlestick-Resistant Gloves,Exploratory Study”, IRSST Report
  17. Ciobanu R., Ionesi D., Budulan C., 2010, “Protective Gloves Against Mechanical Hazard”, TEXSCI, September 6-8, Czech Republic
  18. Ertekin,G., Oğlakcıoğlu, N., Marmaralı, A., 2012, “High Tenacity Weft Knitted Fabrics for Protective Garments, 46th IFKT Congress, Romania
  19. Oğlakçıoğlu, N., Ertekin, G., Marmaralı, A., 2014, “Yüksek Performanslı İpliklerden Üretilen Örme Kumaşların Mekanik Etkilere Karşı Dayanımlarının İncelenmesi”, Tekstil ve Mühendis, 21(95)
  20. Hearle, J.W.S., 2001, High Performance Fibers, Textile Institute, CRC Woodhead Publishing
  21. Irzmanska, E., Stefko, A., 2015, Simulation Method for Assessing the End of Service Life of Gloves Used by Workers Exposed to Mineral Oils and Mechanical Factors, International Journal of Industrial Ergonomics, 47, 61-71
  22. Dolez, P., Soulati, K., Gauvin, C., Lara, J., Vu-Khanh, T., 2012, Information Document for Selecting Gloves for Protection Against Mechanical Hazards, Available from: https://www.irsst.qc.ca/gants/en/InfoDocu.pdf, Accessed at 06.04.2017
  23. Özdemir, F., 2011, Mekanik Risklere Karşı Koruyucu Eldivenlerin Performanslarının İyileştirilmesi Üzerine Çalışmalar, Yüksek Lisans Tezi, Ege Üniversitesi, İzmir
  24. Harrabi, L., Dolez, P.I., Vu-Khanh, T., Lara, J., Tremblay, G., Nadeau, S., Lariviere, C., 2008, Characterization of Protective Gloves Stiffness: Development of a Multidirectional Deformation Test Method, Safety Science, 46, 7, 1025-1036
  25. Klapötke, T.M., Krumm, B., Mayr, N., Steemann, F.X., Steinhauser, G. Safety Testing of Protective Gloves, Available from: http://publik.tuwien.ac.at/files/PubDat_169519.pdf, Accessed at 06.04.2017
  26. Flambard, X., Ferreira, M., Vermeulen, B., Bourbigot, S., & Poutch, F., 2003, Mechanical and Thermal Behaviors of First Choice, Second Choice and Recycled P-Aramid Fibres, Journal of Textile and Apparel, Technology and Management, 3, 2, 1-13
  27. Alpyıldız, T., Rochery, M., Kurbak, A., Flambard, X., 2011, Stab and Cut Resistance of Knitted Structures: A Comparative Study, Textile Research Journal, 81, 2, 205–214
  28. Ertekin, M., Kirtay, H.E., 2016, “Cut resistance of hybrid para-aramid fabrics for protective gloves”, The Journal of The Textile Institute, 107(10), 1276- 1283
  29. EN 420 Standard. 2010, “Protective gloves - General requirements and test methods
  30. Irzmańska, E., Stefko, A., 2012, “Comparative evaluation of test methods for cut resistance of protective gloves according to polish standards”, Fibres & Textiles in Eastern Europe
  31. EN 388 Standard, 2003, “Protective Gloves Against Mechanical Risks”
  32. EN ISO 15025 Standard, 2017, “Protective clothing - Protection against heat and flame - Method of test for limited flame spread”
  33. Lewin, M., ed., 2007, “Handbook of Fiber Chemistry”, Crc Press, p. 1014
  34. Pourmoghani, M., 2004, “Effects of gloves and visual acuity on dexterity”, Graduate Thesis, University of South Florida, USA, p.31
  35. Bensel, C.K., 1993, “The effect of various thicknesses of chemical protective gloves on manual dexterity”, Ergonomics, 36, 687-696
  36. McIntosh, J.D., 1987, “A manual dexterity methodology and evaluatıon of selected chemical protective gloves”, West Virginia University, Morganton
  37. Plummer, R. et al., 1994, “Manual dexterity evaluation of gloves used in handling hazardous materials”, West Virginia University, Department of Industrial Engineering
  38. Saville, B.P., 1999, Physical testing of textiles, Woodhead Publishing Limited, ISBN 1 85573 367 6, Cambridge, England. 39. Škoc, M. S., & Pezelj, E., 2012, Abrasion Resistance of High Performance Fabrics. In Abrasion Resistance of Materials. InTech, p.37
  39. El Messiry, M., 2014, “Investigation of puncture behaviour of flexible silk fabric composites for soft body armour”, Fibres & Textiles in Eastern Europe, 5, 71-76
  40. Fangueiro, R., Carvalho, R., Silveira, D., Ferreira, N., Ferreira, C., Monteiro, F. and Sampaio, S., 2015, “Development of high-performance single layer weft knitted structures for cut and puncture protection”, Journal of Textile Science and Engineering, 5, 225
  41. Gunnarsson, M., Nyman, J., 1998, “Short Fibre Reinforced Elastomers.”
  42. Kotb, N., El Geiheini, A., Salman, A., Abdel – Samad, A., 2009, “Engineering of tearing strength for pile fabrics”. Journal of Textile and Apparel, Technology and Management, 6(1), 1-8
  43. Vajko, R., 2008, “Making sense of cut resistance”, National Safety Ing
  44. Moreland, J. C., 2010, “Production and characterization of aramid copolymer fibers for use in cut protection”, Doctoral dissertation, Clemson University p.5
  45. Dunbar, James J., 1992,"Cut resistant yarn, fabric and gloves." U.S. Patent No. 5,119,512. 9
  46. Lawrence, C.A. ed., 2014, " High Performance Textiles and their Applications, Elsevier, p111
  47. Scott, R.A. ed., 2005, “Textiles for protection”. Elsevier, p. 536
  48. İş sağlığı ve güvenliği, Available from: https://goo.gl/Lviomi (Accessed at 05.06.2017)
  49. İş kazalarında Avrupa birincisiyiz, Available from: https://goo.gl/a9Bi7f (Accessed at 12.06.2017)
  50. T.C. Sosyal Güvenlik Kurumu iş kazaları, SGK istatistikleri, Available from: www.ssk.gov.tr (Accessed at 12.06.2017)
  51. Davas Aksan, A., Durusoy, R., Bal, E., Kayalar, M., Ada, S. and Tanık, F. A., 2012, “Risk factors for occupational hand injuries: Relationship between agency and finger”, Am. J. Ind. Med., 55: 465–473
  52. Hertz, R. P.; Emmett, E. A., 1986, “Risk factors for occupational hand injury”, J Occup Med, Vol. 28, No 1, 1986, p. 36-41
  53. Sorock, G. S.; Lombardi, D. A.; Peng, D. K.; Hauser, R.; Eisen, E. A.; Herrick, R. F.; Mittleman, M. A., 2004a, “Glove use and the relative risk of acute hand injury: a case-crossover study”, Journal of Occupational and Environmental Hygiene, Vol. 1, No 3, p. 182-190
  54. Sorock, G. S.; Lombardi, D. A.; Hauser, R.; Eisen, E. A.; Herrick, R. F.; Mittleman, M. A., 2004b, “A case-crossover study of transient risk factors for occupational acute hand injury”, Occup Environ Med, Vol. 61, No 4, p.305-311
  55. Bradley, J. V., 1969, “Glove characteristics influencing control manipulability”, Human Factors, Vol. 11, No 1, p. 21-36
  56. Bradley, J. V., 1969, “Effect of gloves on control operation time”, Human Factors, Vol. 11, no1, 1969, p. 13-20
  57. Bishu, R. R.; Klute, G.; Kim, B., 1993, The Effects of Extra Vehicular Activity (EVA) Gloves on Dexterity and Tactility. Designing for Diversity. The Human Factors and Ergonomics Society, Vol. 2, p.826-830
  58. Brunick, A. L.; Burns, S.; Gross, K.; Tishk, M.; Feil, P., 1990, “Comparative study: the effects of latex and vinyl gloves on the tactile discrimination of first year dental hygiene students”, Clinical Preventive Dentistry, Vol. 12, No 2, p. 21-25
  59. Chandler, N. P.; Bloxham, G. P., 1990, “Effect of gloves on tactile discrimination using an endodontic model”, Int Endod.J, Vol. 23, No 2, p. 97-99
  60. Woods, J. A.; Leslie, L. F.; Drake, D. B.; Edlich, R. F., 1996, “Effect of puncture resistant surgical gloves, finger guards, and glove liners on cutaneous sensibility and surgical psychomotor skills”, J Biomed Mater Res, Vol. 33, No 1, p. 47-51
  61. Kinoshita, H., 1999, “Effect of Gloves on Prehensile Forces during Lifting and Holding Tasks”, Ergonomics, Vol. 42, No 10, p. 1372-1385
  62. Bellingar, T. A.; Slocum, A. C., 1993, “Effect of Protective Gloves on Hand Movement: An Exploratory Study”, Applied Ergonomics, Vol. 24, No 4, p. 244-250
  63. Gauvin C., Lara J., 2013, “Worker Evaluation of Manual Dexterity, Tactile Sensitivity and Comfort When Wearing Needlestick-Resistant Gloves,Exploratory Study”, IRSST Report
  64. Ciobanu R., Ionesi D., Budulan C., 2010, “Protective Gloves Against Mechanical Hazard”, TEXSCI, September 6-8, Czech Republic
  65. Ertekin,G., Oğlakcıoğlu, N., Marmaralı, A., 2012, “High Tenacity Weft Knitted Fabrics for Protective Garments, 46th IFKT Congress, Romania
  66. Oğlakçıoğlu, N., Ertekin, G., Marmaralı, A., 2014, “Yüksek Performanslı İpliklerden Üretilen Örme Kumaşların Mekanik Etkilere Karşı Dayanımlarının İncelenmesi”, Tekstil ve Mühendis, 21(95)
  67. Hearle, J.W.S., 2001, High Performance Fibers, Textile Institute, CRC Woodhead Publishing
  68. Irzmanska, E., Stefko, A., 2015, Simulation Method for Assessing the End of Service Life of Gloves Used by Workers Exposed to Mineral Oils and Mechanical Factors, International Journal of Industrial Ergonomics, 47, 61-71
  69. Dolez, P., Soulati, K., Gauvin, C., Lara, J., Vu-Khanh, T., 2012, Information Document for Selecting Gloves for Protection Against Mechanical Hazards, Available from: https://www.irsst.qc.ca/gants/en/InfoDocu.pdf, Accessed at 06.04.2017
  70. Özdemir, F., 2011, Mekanik Risklere Karşı Koruyucu Eldivenlerin Performanslarının İyileştirilmesi Üzerine Çalışmalar, Yüksek Lisans Tezi, Ege Üniversitesi, İzmir
  71. Harrabi, L., Dolez, P.I., Vu-Khanh, T., Lara, J., Tremblay, G., Nadeau, S., Lariviere, C., 2008, Characterization of Protective Gloves Stiffness: Development of a Multidirectional Deformation Test Method, Safety Science, 46, 7, 1025-1036
  72. Klapötke, T.M., Krumm, B., Mayr, N., Steemann, F.X., Steinhauser, G. Safety Testing of Protective Gloves, Available from: http://publik.tuwien.ac.at/files/PubDat_169519.pdf, Accessed at 06.04.2017
  73. Flambard, X., Ferreira, M., Vermeulen, B., Bourbigot, S., & Poutch, F., 2003, Mechanical and Thermal Behaviors of First Choice, Second Choice and Recycled P-Aramid Fibres, Journal of Textile and Apparel, Technology and Management, 3, 2, 1-13
  74. Alpyıldız, T., Rochery, M., Kurbak, A., Flambard, X., 2011, Stab and Cut Resistance of Knitted Structures: A Comparative Study, Textile Research Journal, 81, 2, 205–214
  75. Ertekin, M., Kirtay, H.E., 2016, “Cut resistance of hybrid para-aramid fabrics for protective gloves”, The Journal of The Textile Institute, 107(10), 1276- 1283
  76. EN 420 Standard. 2010, “Protective gloves - General requirements and test methods
  77. Irzmańska, E., Stefko, A., 2012, “Comparative evaluation of test methods for cut resistance of protective gloves according to polish standards”, Fibres & Textiles in Eastern Europe
  78. EN 388 Standard, 2003, “Protective Gloves Against Mechanical Risks”
  79. EN ISO 15025 Standard, 2017, “Protective clothing - Protection against heat and flame - Method of test for limited flame spread”
  80. Lewin, M., ed., 2007, “Handbook of Fiber Chemistry”, Crc Press, p. 1014
  81. Pourmoghani, M., 2004, “Effects of gloves and visual acuity on dexterity”, Graduate Thesis, University of South Florida, USA, p.31
  82. Bensel, C.K., 1993, “The effect of various thicknesses of chemical protective gloves on manual dexterity”, Ergonomics, 36, 687-696
  83. McIntosh, J.D., 1987, “A manual dexterity methodology and evaluatıon of selected chemical protective gloves”, West Virginia University, Morganton
  84. Plummer, R. et al., 1994, “Manual dexterity evaluation of gloves used in handling hazardous materials”, West Virginia University, Department of Industrial Engineering
  85. Saville, B.P., 1999, Physical testing of textiles, Woodhead Publishing Limited, ISBN 1 85573 367 6, Cambridge, England. 39. Škoc, M. S., & Pezelj, E., 2012, Abrasion Resistance of High Performance Fabrics. In Abrasion Resistance of Materials. InTech, p.37
  86. El Messiry, M., 2014, “Investigation of puncture behaviour of flexible silk fabric composites for soft body armour”, Fibres & Textiles in Eastern Europe, 5, 71-76
  87. Fangueiro, R., Carvalho, R., Silveira, D., Ferreira, N., Ferreira, C., Monteiro, F. and Sampaio, S., 2015, “Development of high-performance single layer weft knitted structures for cut and puncture protection”, Journal of Textile Science and Engineering, 5, 225
  88. Gunnarsson, M., Nyman, J., 1998, “Short Fibre Reinforced Elastomers.”
  89. Kotb, N., El Geiheini, A., Salman, A., Abdel – Samad, A., 2009, “Engineering of tearing strength for pile fabrics”. Journal of Textile and Apparel, Technology and Management, 6(1), 1-8
  90. Vajko, R., 2008, “Making sense of cut resistance”, National Safety Ing
  91. Moreland, J. C., 2010, “Production and characterization of aramid copolymer fibers for use in cut protection”, Doctoral dissertation, Clemson University p.5
  92. Dunbar, James J., 1992,"Cut resistant yarn, fabric and gloves." U.S. Patent No. 5,119,512. 9
  93. Lawrence, C.A. ed., 2014, " High Performance Textiles and their Applications, Elsevier, p111
  94. Scott, R.A. ed., 2005, “Textiles for protection”. Elsevier, p. 536.