Journals / Tekstil ve Konfeksiyon / 2026 / Volume: 28 Issue: 2

AN EXPERIMENTAL STUDY ON SEWABILITY PROPERTIES OF 100% COTTON DENIM FABRICS

%100 PAMUKLU DENİM KUMAŞLARIN DİKİLEBİLİRLİK ÖZELLİKLERİ ÜZERİNE DENEYSEL BİR ÇALIŞMA

Pages
—
Publication Date
2018-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study investigated the effects of weft density, weft count, finishing process, bending  rigidity and air permeability on the sewability properties of denim fabrics.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper presents an experimental study of the sewability properties of %100 cotton fabrics.
📊
Key Findings & Data:Two different finishing processes were applied to all fabric samples.  Therefore 18 samples having different specifications were obtained.
💡
Conclusion & Impact:This study investigated the effects of weft density, weft count, finishing process, bending  rigidity and air permeability on the sewability properties of denim fabrics.
🔬Design:Research Article
📍Scope:18 samples
⚙️Variables:Sewability · Denim · Cotton

Abstract

This paper presents an experimental study of the sewability properties of %100 cotton fabrics. In this study, denim fabrics woven  with three different weft densities and three different weft count. Two different finishing processes were applied to all fabric samples.  Therefore 18 samples having different specifications were obtained. Sewing needle penetration forces were determined for these fabrics  for sewability properties. Also bending rigidity and air permeability tests were determined for these fabrics for investigated the  relationship between sewability properties. This study investigated the effects of weft density, weft count, finishing process, bending  rigidity and air permeability on the sewability properties of denim fabrics.

Özet

Bu makalede % 100 pamuklu kumaşların dikilebilirlik özelliklerine ait deneysel bir çalışma sunulmaktadır. Bu çalışmada denim  kumaşlar üç farklı atkı sıklığı ve üç farklı atkı iplik numarası ile dokunmuştur. Tüm kumaş numunelerine iki farklı bitim işlemi  uygulanmıştır. Bu nedenle farklı özelliklere sahip 18 numune elde edilmiştir. Bu kumaşların dikilebilirlik özellikleri için dikiş iğnesi  penetrasyon kuvvetleri belirlenmiştir. Ayrıca, bu kumaşlarda dikilebilirlik özelliği ile arasındaki ilişkiyi incelemek amacıyla eğilme  rijitliği ve hava geçirgenliği testleri yapılmıştır. Bu çalışmada, atkı sıklığı, atkı iplik numarası, bitim işlemi, eğilme rijitliği ve hava  geçirgenliğinin denim kumaşların dikilebilirlik özelliklerine etkileri araştırılmıştır.

🔖

Cite This Article

Bakıcı, G. G., Kadem, F. D. (2018). AN EXPERIMENTAL STUDY ON SEWABILITY PROPERTIES OF 100% COTTON DENIM FABRICS. Tekstil ve Konfeksiyon, Volume: 28 Issue: 2. https://ajindex.com/articles/1111364

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. 1 Guner, M., Akman, U., and Yucel, O., 2010, “Improving the man shirt production process using the six sigma method”, Tekstil ve Konfeksiyon, Vol: 20(1), pp:75-81.
  2. 2 Behera, B. K., Chand, S., Singh, T. G., and Rathee, P., 1997, “Sewability of denim”, International Journal of Clothing Science and Technology, Vol: 9(2), pp:128-140.
  3. 3 Pamuk, O., Kurtoglu, O., Tama, D., and Ondogan, Z., 2011, “Sewability properties of lining fabrics”, Journal of Textile & Apparel, Vol: 21(3), pp: 301-304.
  4. 4 Gurarda, A., and Meric, B., 2007, “The effects of elastane yarn type and fabric density on sewing needle penetration forces and seam damage of PET / elastane woven fabrics”, Fibres & Textiles in Eastern Europe, Vol: 15(4), pp: 73-76.
  5. 5 Haghighat, E., Mohammad Etrati, S., and Shaikhzadeh Najar, S., 2014, “Evaluation of woven denim fabric sewability based on needle penetration force”, Journal of Engineered Fabrics & Fibers (JEFF), Vol: 9(2), pp: 47-60.
  6. 6 Manich, A. M., Domingues, J. P., Sauri, R. M., and Barella, A., 1998, “Relationships between fabric sewability and structural, physical, and FAST properties of woven wool and wool-blend fabrics”, Journal of the Textile Institute, Vol: 89(3), pp: 579-590.
  7. 7 Saied, F., Abdel-megeid, Z.M., and El Gabry, L.K., 2011, “The relation between fabric construction, treatments and sewability”, Journal of American Science, Vol: 7(3), pp: 818-826.
  8. 8 Yildiz, E. Z., Pamuk, O., and Ondogan, Z., 2011, “A study about the effects of interlinings to sewability properties of the woven fabrics”, Journal of Textile & Apparel, Vol: 21(1), pp: 87-90.
  9. 9 Gurarda, A., and Meric, B., 2005, “Sewing needle penetration forces and elastane fiber damage during the sewing of cotton/elastane woven fabrics”, Textile research journal, Vol: 75(8), pp: 628-633.
  10. 10 Gurarda, A., 2008, “Investigation of the seam performance of PET/nylon-elastane woven fabrics”, Textile Research Journal, Vol: 78(1), pp: 21-27.
  11. 11 Munden, D. L., and Leeming, C. A., 1976, “U.S. Patent No. 3,979,951” Washington, DC: U.S. Patent and Trademark Office.
  12. 12 L&M sewability tester operating instructions. Retrieved from http://www.johngodrich.co.uk/product/l-m-sewability-tester/
  13. 13 Gulsen Bakıcı, G., Doba Kadem, F., “An Experimental Study About Sewability and Bending Strenght Properties of Cotton Fabrics”, Çukurova University Journal of the Faculty of Engineering and Architecture, Vol: 30(2), pp: 177-182.
  14. 14 TS 1409:1973-Stiffness determination of woven textiles. Retrieved from https://www.tse.org.tr/en/
  15. 15 TS 391 EN ISO 9237:1999-Textiles-Determination of permeability of fabrics to air. Retrieved from https://www.tse.org.tr/en/
  16. 16 Ala, D.M., Gulsen Bakıcı, G., Abdulvahitoglu, A., 2017, “Süprem Örme Kumaşlarda Kalınlık, Hava Geçirgenliği ve Boncuklanma Özelliklerinin İncelenmesi”, Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Vol: 32(3), pp: 103-109.