Journals / Gıda / 2026 / Cilt: 15 Sayı: 5

The Effect of Extrusion Operations Conditions on Rheological Properties of Lentil Flour (Turkish with English Abstract)

Mercimek Ununun Reolojik Özelliklerine Ekstrüzyonun Etkisi

Journal
Gıda
Pages
—
Publication Date
1990-10-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Increasing the reducing time of material inside the extruder reduced the apparent viscosity than the other operations conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A slit die rheometer with four pressure holes along the die was used in conjunction with a twin screw extruder to measure the pressure profiles are fitted linear functions to get the exit pressure for first normal stress difference calculation.
📊
Key Findings & Data:The first normal difference of lentil melt is found to be proportional to wall shear rate.
💡
Conclusion & Impact:Increasing the reducing time of material inside the extruder reduced the apparent viscosity than the other operations conditions.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

A slit die rheometer with four pressure holes along the die was used in conjunction with a twin screw extruder to measure the pressure profiles are fitted linear functions to get the exit pressure for first normal stress difference calculation. The first normal difference of lentil melt is found to be proportional to wall shear rate. Viscosity data were obtained in the shear rate range of 200-1000 1/sec. Increasing the reducing time of material inside the extruder reduced the apparent viscosity than the other operations conditions.

Özet

Çift vidalı ekstruder çıkışına monte edilmiş ince düz kanallı reometre ve reometreye bağlı bulunan güç çeviriciler ile ekstrüzyon sırasında belli sıcaklıktaki mercimeğin basınç profili ölçülerek, çıkış basıncı belirlenmiştir. Çıkış basıncıyla ise 1. normal stres farkının kayma debisiyle doğru orantılı olarak arttığı saptanmıştır. Viskozite ise, çalışma koşullarında azalmıştır. Ayrıca, viskozitedeki azalmanın mercimeğin ekstruder içinde kalma süresine bağlı olarak arttığı belirlenmiştir. Bu durumun ekstruderin dolma derecesinin artışıyla büyüyen kayma kuvveti sonunda ortaya çıkan, mekanik enerjiden kaynaklandığı saptanmıştır.

🔖

Cite This Article

Sümbül, Y. (1990). The Effect of Extrusion Operations Conditions on Rheological Properties of Lentil Flour (Turkish with English Abstract). Gıda, Cilt: 15 Sayı: 5. https://ajindex.com/articles/1106930

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...