Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2026 / Cilt: 11 Sayı: 1

PREDICTIVE MAINTENANCE WITH VIBRATION ANALYSIS ON BEARINGS

TİTREŞİM ANALİZİ İLE RULMANLARDA KESTİRİMCİ BAKIM - PREDICTIVE MAINTENANCE WITH VIBRATION ANALYSIS ON BEARINGS

Pages
17–23
Publication Date
2015-07-06
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Both the outer race damage and inner race damage have been established in this work

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Bearings are equipment used to make machines bear.
📊
Key Findings & Data:It’s possible to establish the damages which occur or are likely to occur in the machines by observing the vibrations occurred on the bearings.
💡
Conclusion & Impact:Both the outer race damage and inner race damage have been established in this work
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Kestirimci bakım · titreşim · rulman / Predictive maintenance

Abstract

Bearings are equipment used to make machines bear. It’s possible to establish the damages which occur or are likely to occur in the machines by observing the vibrations occurred on the bearings. In this paper, the results of the predictive maintenance work by means of vibration analysis made on the bearings used to make the compressor bear have been presented. Both the outer race damage and inner race damage have been established in this work

Özet

TİTREŞİM ANALİZİ İLE RULMANLARDA KESTİRİMCİ BAKIM Rulmanlar makineleri yataklamak için kullanılan ekipmanlardır. Rulmanlarda meydana gelen titreşimleri izleyerek makinelerde oluşan yada oluşması muhtemel hasarları tespit etmek mümkündür. Bu çalışmada kompresör yataklanmasında kullanılan rulmanlarda yapılan titreşim analizi ile kestirimci bakım çalışmasının sonuçları sunulmuştur. Yapılan çalışmada rulmanda hem dış bilezik hasarı hem de iç bilezik hasarı tespit edilmiştir. PREDICTIVE MAINTENANCE WITH VIBRATION ANALYSIS ON BEARINGS Bearings are equipment used to make machines bear. It’s possible to establish the damages which occur or are likely to occur in the machines by observing the vibrations occurred on the bearings. In this paper, the results of the predictive maintenance work by means of vibration analysis made on the bearings used to make the compressor bear have been presented. Both the outer race damage and inner race damage have been established in this work.

🔖

Cite This Article

Yıldırım, E., Karahan, M. (2015). PREDICTIVE MAINTENANCE WITH VIBRATION ANALYSIS ON BEARINGS. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 11 Sayı: 1, 17–23. https://doi.org/10.18466/cbufbe.95879

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Belek, T. ve Toprak, T. “Endüstriyel Tesislerde Makina Performansının İzlenmesi ve Bilgisayar Destekli Bakım Planlanması”, Brüel & Kjaer Teknik Personel Eğitimi Kurs Notları., İTÜ Makina Fakültesi., 1991
  2. Belek, T. ve Toprak, T. “Titreşim Ölçümüne Dayalı Makina Bakımı”, Brüel & Kjaer Teknik Personel Eğitimi Kurs Notları., İTÜ Makina Fakültesi, İstanbul, 2003
  3. Tekelioğlu, M., “Titreşim Analiziyle Kestirimci Bakım”, Bilgilendirme Semineri, Dokuz Eylül Üniversitesi Mühendislik Fakültesi Makina Mühendisliği Bölümü. İzmir, 1992
  4. McFadden, P. D. and Smith, J. D., “Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing”, Journal of Sound and Vibration, 96(1a), 69-82, 1984.
  5. McFadden, P. D. and Smith, J. D., “The Vibration Produced by a Multiple Point Defect in a Rolling Element Bearing”, Journal of Sound and Vibration, 98(2), 263-273, 1985.
  6. Aktürk, N., Uneeb, M. and Gohar, R., "The Effects of Number of Balls and Preload on Vibrations Associated with Ball Bearings", Journal of Tribology, 119, 747-753, October 1997.
  7. Aktürk, N. and Gohar, R., "The Effect of Ball Size Variation on Vibrations Associated with Ball-Bearings", Proc. I.Mech.E., 212 Part J, 101-109, 1998.
  8. Tandon, N. and Choudhury, A., “A Review of Vibration and Acoustics Measurement Methods for the Detection of Defects in Rolling Element Bearings”, Tribology International, 32, 469- 480, 1999.
  9. Orhan, S., Arslan, H. ve Aktürk, N., “Titreşim Analiziyle Rulman Arızalarının Belirlenmesi”, Gazi Üniv. Müh. Mim. Fak. Der., Cilt 18, No 2, 39-48, 2003
  10. Aktürk, N., Üzkürt, İ., Yüksel, Ş., “Titreşim Analizi İle Rulmanların Çalışabilirlik Durumlarının Belirlenmesi”, Mühendis ve Makina Cilt:41 Sayı:481 Şubat 2000.
  11. Orhan, S., Aktürk, N., Çelik, V.,”Vibration Monitoring For Defect Diagnosis of Rolling Element Bearings As A Predictive Maintenance Tool: Comprehensive Case Studies”, NDT&E International 39 293-298 2006