SavedAdd your journal

Journals / Bartın Orman Fakültesi Dergisi / 2006 / Cilt: 8 Sayı: 10

EFFECTS OF PRESSURE AND TEMPERATURE ON PHYSICAL AND MECHANICAL PROPERTIES OF HIGH DENSITY FIBERBOARD

SERT LİF LEVHALARIN FİZİKSEL VE MEKANİK ÖZELLİKLERİNE SICAKLIK VE BASINCIN ETKİSİ

Abdullah İstek
Pages
29–35
Publication Date
2006-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that increasing temperature and pressure had positive effect on the properties.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, high density fiberboard was manufactured by using dry process.
📊
Key Findings & Data:The fibers were obtained from SFC MDF mill consisting of 70% Pinus spp. and 30% hardwoods.
💡
Conclusion & Impact:It was found that increasing temperature and pressure had positive effect on the properties.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Liflevha · HDF · Fiziksel ve Mekanik Özellikler

Abstract

In this study, high density fiberboard was manufactured by using dry process. The effects of press temperature and pressure on physical and mechanical properties were investigated. The fibers were obtained from SFC MDF mill consisting of 70% Pinus spp. and 30% hardwoods. The laboratory conditions were as fallows; pres temperatures were 160-170-180-190 °C, pressure as 50-55 kg/cm2, total pressing time as 100 seconds. The HDF produced had 5±0,2 mm and having the density of 1,02-1,12 g/cm3. The physical and mechanical properties of the panels were determined according to TS EN standards. It was found that increasing temperature and pressure had positive effect on the properties.

Özet

Bu araştırmada, Kuru Yöntemle sert lif levha üretilmiştir. Üretim koşullarından pres sıcaklığı ve basıncının

🔖

Cite This Article

İstek, A. (2006). EFFECTS OF PRESSURE AND TEMPERATURE ON PHYSICAL AND MECHANICAL PROPERTIES OF HIGH DENSITY FIBERBOARD. Bartın Orman Fakültesi Dergisi, Cilt: 8 Sayı: 10, 29–35. https://ajindex.com/articles/1095496

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Bozkurt, Y. ve Göker, Y., 1990, Yongalevha Endüstrisi, İ.Ü. Orman Fakültesi Yayınları, İstanbul, 975-404-191-1.
  2. Eroğlu, H. ve Usta, M., 2000, Liflevha Üretim Teknolojisi, K.T.Ü. Orman Fakültesi Yayınları, Trabzon.
  3. İstek, A. ve Eroğlu, H., 2002, Buğday Saplarından (Triticum aestivum L.,) Sert Lif Levha Üretimi, II. Ulusal Ormancılık Kongresi, cilt 3, sayfa 1038-1041, 15-18 Mayıs.
  4. Kollmann, F.P.F., E.W. KUENZI, A.J. STAMM, 1975, Principles of Wood Science and Technology II, wood Based Materials, Springer Ferlag Berlin, p. 551-672.
  5. Suchsland, O., Woodson, E.G., 1986, Fiberboard Manufacturing Practices in the United States. U.S. Department of Agriculture, Forest Service No:640, Lousiana, USA.
  6. TS EN 316, Nisan 1998, Odun Lifi Levhalar – Tarifler Sınıflandırma ve Semboller, TSE, Ankara.
  7. TS EN 326-1, Nisan 1999, Ahşap Esaslı Levhalar – Numune Alma Kesme ve Muayene, TSE, Ankara.
  8. TS EN 322, Nisan 1999, Ahşap Esaslı Levhalar – Rutubet Miktarının Tayini, TSE, Ankara.
  9. TS EN 323, Nisan 1999, Ahşap Esaslı Levhalar – Birim Hacim Ağırlığının Tayini, TSE, Ankara.
  10. TS EN 317, Nisan 1999, Yongalevhalar ve Lif Levhalar – Su İçerisine Daldırma İşleminden Sonra Kalınlığına Şişme Tayini, TSE, Ankara.
  11. TS EN 310, Nisan 1999, Ahşap Esaslı Levhalar – Eğilme Dayanımı ve Eğilme Elastikiyet Modülünün Tayini, TSE, Ankara.
  12. TS EN 319, Nisan 1999, Yongalevhalar ve Lif Levhalar Levha Yüzeyine Dik Çekme Dayanımının Tayini, TSE, Ankara.