SavedAdd your journal

Journals / Bartın Orman Fakültesi Dergisi / 2026 / Cilt: 21 Sayı: 2

Production of Bioplastic Composite and Wood Bioplastic Composite with Starch from Different Biomasses

Farklı Biyokütlelerden Elde Edilen Nişasta İle Akıllı Biyoplastik Malzeme ve Odun Biyoplastik Kompozit Üretimi

Ferhat Özdemir(KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ)0000-0002-2282-1884
Doğu Ramazanoğlu(KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ)0000-0002-6356-5792
Pages
377–385
Publication Date
2019-08-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results obtained; the highest and lowest water solubility values are sample D with 100 % and sample F with 8.01 %, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to produce eco-friendly alternative bioplastic and wood biocomposite packaging materials based on starch, derived from different biomasses, in order to minimize the damage caused by petroleum derivative packages to human health and the environment.
📊
Key Findings & Data:For this purpose, solubility in water (%), water absorption (%), density according to ASTM D 792 (g/cm 3 ) and surface roughness values according to ISO 4287 standard were determined.
💡
Conclusion & Impact:According to the results obtained; the highest and lowest water solubility values are sample D with 100 % and sample F with 8.01 %, respectively.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Petrokimya · biyokütle · akıllı biyoplastik

Abstract

The aim of this study is to produce eco-friendly alternative bioplastic and wood biocomposite packaging materials based on starch, derived from different biomasses, in order to minimize the damage caused by petroleum derivative packages to human health and the environment. For this purpose, solubility in water (%), water absorption (%), density according to ASTM D 792 (g/cm 3 ) and surface roughness values according to ISO 4287 standard were determined. According to the results obtained; the highest and lowest water solubility values are sample D with 100 % and sample F with 8.01 %, respectively. The highest and lowest water absorption (%) capacity with value of % 242 as sample B and as 108 % with the sample E were measured respectively. The most uniform surface was obtained by the values Ra, Rz and Rmax, as 3.53, 18.8 and 25.1 µm for sample A while the highest surface roughness with respectively as 10.4, 43.8 and 55.0 µm values for sample D was determined.

Özet

Bu çalışmanın amacı, petrol türevi ambalajların insan sağlığına ve çevreye verdiği zararı en aza indirebilmek için farklı biyokütlelerden elde edilen nişasta esaslı çevre dostu alternatif akıllı biyoplastik ve odun biyokompozit ambalaj malzemelerinin üretilmesidir. Bu amaçla, üretilen numunelerin sudaki çözünme (%), su alma (%), ASTM D 792 standartlarına göre yoğunluk (g/cm 3 ) ve ISO 4287 standardına göre yüzey pürüzlülüğü değerleri belirlenmiştir. Elde edilen sonuçlara göre; en yüksek ve en düşük suda çözünme değerleri sırasıyla % 100 ile D numunesi ve % 8,01 ile F numuneleridir. Suda alma (%) değerleri, en yüksek % 242 ile B numunesi en düşük ise % 108 değeri ile E numunesi ölçülmüştür. En düzgün yüzeye R a , R z ve R max değerleri ile sırasıyla, 3.53, 18.8 ve 25.1 µm olarak A numunesi ölçülür iken, yüzey pürüzlülüğünün en fazla olduğu numune ise 10.4, 43.8 ve 55.0 µm değerleri ile D numunesinin olduğu belirlenmiştir.

🔖

Cite This Article

Özdemir, F., Ramazanoğlu, D. (2019). Production of Bioplastic Composite and Wood Bioplastic Composite with Starch from Different Biomasses. Bartın Orman Fakültesi Dergisi, Cilt: 21 Sayı: 2, 377–385. https://ajindex.com/articles/1095128

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (19)

  1. Ali A, Yu L, Liu H, Khalid S, Meng L, Chen L (2017). Preparation and Characterization of Starch-Based Composite Films Reinforced by Corn and Wheat Hulls. Journal of Applied Polymer Science, 134
  2. Asaf KS (2008). Synthesis and Properties of Starch Based Biomaterials. University of Groningen, Groningen.
  3. ASTM D 792 (2004). Density and Specific Gravity (Relative Density) of Plastics by Displacement, ASTM International, West Conshohocken, PA.
  4. Averous L, Fringant C, Moro L (2001). Starch-Based Biodegradable Materials Suitable for Thermodynamics Packaging. Starch/Starke, 53, 368-371.
  5. Avella M, Vlieger JJD, Errico ME, Fischer S, Vacca P, Vope MG (2009). Biodegradable Starch/Clay Nanocomposite Films for Food Packaging Applications. Food Chemistry, 93, 548-558.
  6. Biliaderis CG (1998). Structures and Phase Transitions of Starch Polymers, in Polysaccharide Association Structures in Food. Marcel Dekker, Walter RH, New York, pp. 57-168.
  7. Gontard N, Guilbert S, Cuq JL (1992). Edible wheat gluten films: influence of the main process variables on film properties using response surface methodology. Journal of Food Science and Technology. (57): pp. 190–195.
  8. Prabhu NT, Prashantha K (2016). A Review on Present Status and Future Challenges of Starch Based Polymer Films and Their Composites in Food Packaging Applications, Polymer Composites. 39 (7): 2499-2522.
  9. Sharma C, Manepalli PH, Thatte A, Thomas S, Kalarikkal N, Alavi S (2017). Biodegradable Starch/PVOH/Laponite RD-Based Bionanocomposite Films Coated with Graphene Oxide: Preparation and Performance Characterization for Food Packaging Applications. Colloid and Polymer Science, 295, 1695-1708.
  10. Stevens ES (2002). Green Plastics: An Introduction to the New Science of Biodegradable Plastics. Princeton University Press, Princeton.
  11. Imre B, Pukanszky B (2013). Compatibilization in Bio-Based and Biodegradable Polymer Blends. European Polymer Journal, 49, 1215-1233.
  12. ISO 4287 (1984). Help file of Ultra Software.Taylor and Hobson.
  13. Ölçer H, Akın B (2008). Starch: Biosynthesis, Granule Structure and Genetic Modifications. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi, (016), 1-12.
  14. Özdemir F, Ramazanoğlu D (2018). Nişasta Esaslı Dilatant Sıvıların Akıllı Darbe Absorban Malzemesi Olarak Kullanılabilirliğinin Araştırılması 3. Uluslararası Akdeniz Bilim ve Mühendislik Kongresi 24-26 Ekim 2018 Çukurova Üniversitesi, Kongre Merkezi, Adana/Türkiye 1054.
  15. Tharanathan RN (2003). Biodegradable Films and Composite Coatings: Past, Present, and Future. Trends in Food Science and Technology, 14, 71-78.
  16. Pan DD, Jane JL (2000). Internal structure of normal maize starch granules revealed by chemical surface gelatinization. Biomacro-molecules, 1, 126–132.
  17. Whistler RL, BeMiller JN (1996). Starch. In: R. L. Whistler & J. N. BeMiller (Eds), Carbohydrate chemistry for food scientists (pp. 117–151). St. Paul, MN: Eagan Press.
  18. Yamin FF, Lee M, Pollak LM, White PJ (1999). Thermal properties of starch in corn variants isolated after chemical mutagenesis of inbred line B73. Cereal Chemistry, 76, 175– 181.
  19. ISO 4287 (1984). Help file of Ultra Software.Taylor and Hobson.