SavedAdd your journal

Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2020 / Cilt: 26 - Sayı: 1

Natural fiber thermoplastic composites in terms of new production technologies: A review

Yeni imalat teknolojileri açısından doğal elyaf termoplastik kompozitler: Bir derleme

Anıl AKDOĞAN
Ali Serdar VANLI
Pages
30–36
Publication Date
2020-02-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of conducted experiment, the obtained production output rate is presented.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper investigates Natural Fiber Thermoplastic Composites (NFTC) which take attention of the researchers and the market having aesthetic and low maintenance properties in many applications.
📊
Key Findings & Data:Additive usage is an increasing application for NFTC production to get into the novel markets satisfying strong performance requirements and life stability interests of users.
💡
Conclusion & Impact:At the end of conducted experiment, the obtained production output rate is presented.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Polimer kompozitler · Doğal elyaf termoplastik kompozitler · İmalat teknolojileri

Abstract

This paper investigates Natural Fiber Thermoplastic Composites (NFTC) which take attention of the researchers and the market having aesthetic and low maintenance properties in many applications. Additive usage is an increasing application for NFTC production to get into the novel markets satisfying strong performance requirements and life stability interests of users. In this article, polymer blends from natural resources including bio-based additives for polymer composites were introduced. Afterwards, favorite additive types and most effective pelletizing processes in literature were analyzed to improve composite productivity. At the end of the paper, the common NFTC production technologies are discussed. A specially designed compounding extruder which is designed to overcome production difficulties and supply high processing performances is introduced. At the end of conducted experiment, the obtained production output rate is presented.

Özet

Bu çalışma, estetik ve düşük bakım özelliklerine sahip birçok uygulamada araştırmacıların ve pazarın dikkatini çeken Doğal Elyaf Termoplastik Kompozitleri (NFTC) araştırmaktadır. Katkı kullanımı, NFTC üretimi açısından giderek artış gösteren, güçlü performans gereksinimlerini karşıladığı için de yeni pazarlara giriş imkanı sağlayan, uzun ömürlü ve kullanıcı beklentilerini tatmin eden bir uygulamadır. Bu çalışmada, polimer kompozitlerin biyo-bazlı katkıları dahil olmak üzere doğal kaynaklardan elde edilen polimer karışımlar tanıtılmıştır. İlaveten, kompozit üretkenliğini arttırmak için favori katkı maddeleri ve literatürdeki en etkili peletleme işlemleri analiz edilmiştir. Çalışmanın sonunda, yaygın olarak kullanılan NFTC üretim teknolojileri tartışılmıştır. Çeşitli imalat zorluklarının üstesinden gelen ve yüksek işlem performansları sağlayan bir imalat için özel olarak tasarlanmış karıştırıcı bir extruder tanıtılmıştır. Deneysel bir uygulama sonunda ulaşılan üretim kapasitesi paylaşılmıştır.

🔖

Cite This Article

AKDOĞAN, A., VANLI, A. S. (2020). Natural fiber thermoplastic composites in terms of new production technologies: A review. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 26 - Sayı: 1, 30–36. https://ajindex.com/articles/108854

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Muthuraj R, Misra M, Mohanty AK. Studies on mechanical, thermal, and morphological characteristics of biocomposites from biodegradable polymer blends and natural fibers. Editors: Misra M, Pander J, Mohanty A. Biocomposites: Design and Mechanical Performance, 93-140,
  2. Canada, Woodhead Publishing, 2015.
  3. Sanjay MR, Arpitha GR, Yogesha B. “Study on mechanical properties of natural-glass fibre reinforced polymer hybrid”. Materials Today: Proceedings, 2(4-5), 2959-2967, 2015.
  4. Imre B, Pukánszky B. “Recent advances in bio-based polymers and composites: Preface to the BiPoCo 2012 Special Section”. European Polymer Journal, 49(6), 1146-1150, 2013.
  5. Imre B, Pukánszky B. “Compatibilization in bio-based and biodegradable polymer blends”. European Polymer Journal, 49(6), 1215-1233, 2013.
  6. Naseem A, Tabasum S, Zia KM, Zuber M, Ali M, Noreen A. “Lignin-derivatives based polymers, blends and composites: A review”. International Journal of Biological Macromolecules, 93, 296-313, 2016.
  7. Jiang L, Zhang J. Biodegradable and Biobased Polymers. Editor: Kutz M. Applied Plastics Engineering Handbook, 127-143,
  8. Norwich, NY, William Andrew Publishing, 2017.
  9. Jian L, Huang J, Qian J, Chen F, Zhang J, Wolcott MP, Zhu Y. “Study of Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/Bamboo Pulp Fiber Composites: Effects of Nucleation Agent and Compatibilizer”. Journal of Polymers and the Environment, 16(2), 83-93, 2008.
  10. Markarian J. “Additive development aid growth in wood plastic composites”. Plastics Additives & Compounding, 4(11), 18-21, 2002.
  11. Pritchard G. “Two technologies merge: wood plastic composites”. ReinforcedPlastics, 48(6), 21-29, 2004.
  12. Sykacek E, Hrabalova M, Frech H, Mundigler N. “Extrusion of five biopolymers reinforced with increasing wood flour concentration on a production machine, injection moulding and mechanical performance”. Composites: Part A, 40(8), 1272-1282, 2009.
  13. Nygard P, Tanem BS, Karlsen T, Brachet P, Leinsvang B. “Extrusion-Based wood fiber-pp composites: wood powder and pelletized wood fibers-a comparative study”. Composites Science and Technology, 68(15-16), 3418-3424, 2008.
  14. Danyadi L, Janecska T, Szabo Z, Nagy G, Moczo J, Pukanszky B. “Wood flour filled PP composites: Compatibilization and adhesion”. Composites Science and Technology, 67(13), 2838-2846, 2007.
  15. Bledzki A, Letman M, Viksne R, Rence L. “A comparison of compounding processes and wood type for wood fibre-PP composites”. Composites Part A, 36(6), 789-797, 2005.
  16. Sykacek E, Hrabalova M, Frech H, Mund