Journals / Journal of Physical Chemistry and Functional Materials / 2023 / Cilt: 6 Sayı: 2

Evaluation of Optical and Radiation Protection Parameters of High Refractive Index Polymers

Pages
152–160
Publication Date
2023-12-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the light transmittance of the two MR-8 lens samples examined was over 90%, and the transmittance at the wavelength (~550nm) to which the human eye is most sensitive was 83.437% and 84.602% for the prescription and non-prescription samples, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The optical properties of the prescription and non-prescription (plano) samples of the MR-8 high index lens were examined by UV/VIS spectrometry.
📊
Key Findings & Data:The results showed that the light transmittance of the two MR-8 lens samples examined was over 90%, and the transmittance at the wavelength (~550nm) to which the human eye is most sensitive was 83.437% and 84.602% for the prescription and non-prescription samples, respectively.
💡
Conclusion & Impact:This research is also important in terms of determining the optical and nuclear radiation parameters of the material used in the manufacture of high index lenses and investigating its effectiveness in reducing the dose to the eyepiece.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:High Index Lenses · Eye Health · Optical Properties

Abstract

The optical properties of the prescription and non-prescription (plano) samples of the MR-8 high index lens were examined by UV/VIS spectrometry. The results showed that the light transmittance of the two MR-8 lens samples examined was over 90%, and the transmittance at the wavelength (~550nm) to which the human eye is most sensitive was 83.437% and 84.602% for the prescription and non-prescription samples, respectively. In terms of quality of vision, it is expected that the visible light transmittance will be high and the ultraviolet light transmittance will be minimal. It is very important that both the prescription and non-prescription organic MR-8 lenses tested have no transmittance below approximately 398nm. This means that this lens material protects against UVA and UVB rays, even though it is uncoated. It is also important to reduce the dose to the lens, which is a radiosensitive tissue. In the study, the mass absorption coefficients of MR-8 and Ormix lens materials in the 0.15-2.00 MeV energy range were calculated using the web-based XCOM programme. LAC, HVL, TVL, MFP, RPE and TF values were calculated from the MAC values obtained. At energies below 0.05 MeV, the maximum MAC value was 0.974 and 4.416 for the MR-8 and Ormix lenses, respectively. The RPE and TF values were 0.807-16.235%, 0.996-0.992% for the MR-8 lens and 0.862-55.233%, 0.448-0.991% for the Ormix lens. The results showed that the photon absorption ability of the Ormix lens is relatively better in the region where the photoelectric interaction is dominant. This research is also important in terms of determining the optical and nuclear radiation parameters of the material used in the manufacture of high index lenses and investigating its effectiveness in reducing the dose to the eyepiece.

🔖

Cite This Article

KIRBIYIK, M., BİLİCİ, S. (2023). Evaluation of Optical and Radiation Protection Parameters of High Refractive Index Polymers. Journal of Physical Chemistry and Functional Materials, Cilt: 6 Sayı: 2, 152–160. https://ajindex.com/articles/1021950

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. R. Pillay, R. Hansraj, N. Rampersad, Historical development, applications and advances in materials used in spectacle lenses and contact lenses [response to letter], Clin. Optom. 12 (2020) 201–202. doi:10.2147/OPTO.S289792. A.H. Alhamdani, H.H. Al-Aaraji, M.R. Abdul-Hussein, R.A. Madlool, Borosilicate and Polyurethane as Materials for Lenses to Correct Human Presbyopia, J. Phys. Conf. Ser. 1032 (2018). doi:10.1088/1742-6596/1032/1/012042.
  2. M. Tyagi, G. Suri, P. Chhabra, G. Seshadri, A. Malik, S. Aggarwal, R.K. Khandal, Novel way of making high refractive index plastics; metal containing polymers for optical applications, E-Polymers. (2009). doi:10.1515/epoly.2009.9.1.1197. H.Z. Büyükyıldız, Spectacle Lenses, Lens Materials and Personalized Spectacle Lenses, Turkish J. Ophthalmol. (2010). doi:10.4274/tjo. M.G. Semercioğlu, Lens Designer’s Optical Lens Development Processes, Int. J. Innov. Approaches Sci. Res. 6 (2022) 116–132.
  3. A. Chandrinos, A Review of Polymers and Plastic High Index Optical Materials, J. Mater. Sci. Res. Rev. 7 (2021) 1–14.
  4. T. Higashihara, M. Ueda, Recent progress in high refractive index polymers, Macromolecules. 48 (2015) 1915–1929. doi:10.1021/ma502569r. T. Okubo, S. Kohmoto, M. Yamamoto, Properties of Polymers Comprising 1, 4-Dithiane-2, 5-Bis ( thiomethyl ) Group, J. Appl. Polym. Sci. 68 (1997) 1791–1799.
  5. G. Ateş, S. Bilici, Investigation of Spectral and Optical Properties of Some Organic Eyeglass Lenses, J. Inonu Univ. Heal. Serv. Vocat. Sch. 11 (2023) 1042–1053. doi:10.33715/inonusaglik.1197712. H.Z. Büyükyıldız, Gözlük Camı Kaplamaları ve Renkli Camlar Coatings and Tints of Spectacle Lenses, Turkish J. Ophthalmol. (2012) 359–369.
  6. B. Jaffrennou, N. Droger, F. Méchin, J.L. Halary, J.P. Pascault, Characterization, structural transitions and properties of a tightly crosslinked polythiourethane network for optical applications, E-Polymers. (2005) 1–19. doi:10.1515/epoly.2005.5.1.866. G.S. Jha, G. Seshadri, A. Mohan, R.K. Khandal, Development of high refractive index plastics, E-Polymers. (2007) 1–25. doi:10.1515/epoly.2007.7.1.1384. Y. Jia, B. Shi, J. Jin, J. Li, High refractive index polythiourethane networks with high mechanical property via thiol-isocyanate click reaction, Polymer (Guildf). 180 (2019). doi:10.1016/j.polymer.2019.121746. H. Mutlu, E.B. Ceper, X. Li, J. Yang, W. Dong, M.M. Ozmen, P. Theato, Sulfur Chemistry in Polymer and Materials Science, Macromol. Rapid Commun. 40 (2019) 1–51. doi:10.1002/marc.201800650. V. Prajzl