Journals / Journal of Thermal Engineering / 2023 / Cilt: 9 Sayı: 6

Single-phase and two-phase models of a hybrid nanofluid traveling through a non-uniformly heated (PTC) receiver: A comparative study

Pages
1442–1451
Publication Date
2023-11-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results demonstrated that the single and two-phase models pro-duced almost similar hydrodynamic results but dissimilar thermal ones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The current study used single and two-phase modeling to numerically explore three-dimen-sional the turbulent forced convection of a hybrid nanofluid passing through a non-uniformly heated parabolic trough solar collector (PTC) for increasing heat transfer.
📊
Key Findings & Data:The results demonstrated that the single and two-phase models pro-duced almost similar hydrodynamic results but dissimilar thermal ones.
💡
Conclusion & Impact:The results also illustrated that the hybrid nanofluid gives the highest thermal performance for a mixture composed of 1.5% copper + 0.5% alumina dispersed in the water.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:CFD · Forced Convection · Parabolic Trough Solar Collector

Abstract

The current study used single and two-phase modeling to numerically explore three-dimen-sional the turbulent forced convection of a hybrid nanofluid passing through a non-uniformly heated parabolic trough solar collector (PTC) for increasing heat transfer. The typical heat flux profile on the receiver’s absorber outer wall was addressed by a finite volume method (FVM) and the MCRT method. The results demonstrated that the single and two-phase models pro-duced almost similar hydrodynamic results but dissimilar thermal ones. It was found that the results of mixture model matched the experimental ones. The results also illustrated that the hybrid nanofluid gives the highest thermal performance for a mixture composed of 1.5% copper + 0.5% alumina dispersed in the water.

🔖

Cite This Article

BENABDERRAHMANE, A., HUSSEIN, A. K., YOUNIS, O., BENAZZA, A. (2023). Single-phase and two-phase models of a hybrid nanofluid traveling through a non-uniformly heated (PTC) receiver: A comparative study. Journal of Thermal Engineering, Cilt: 9 Sayı: 6, 1442–1451. https://ajindex.com/articles/1021444

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. REFERENCES [1] Bejan A, Kraus AD. Heat transfer handbook. Hoboken, NJ: John Wiley, Sons Inc; 2003. [2] Choi SUS. Nanofluid technology: current status and future research. Vienna, VA United States: Korea-U.S. Technical Conference on Strategic Technologies; 1998. [3] Hussein AK. Applications of nanotechnology in renewable energies-A comprehensive overview and understanding. Renew Sust Energ Rev 2015;42:460–76. [4] Hussein AK, Walunj AA, Kolsi L. Applications of nanotechnology to enhance the performance of the direct absorption solar collectors. J Therm Eng 2016;2:529–40. [5] Li D, Li Z, Zheng Y, Liu C, Hussein AK, Liu X. Thermal performance of a PCM-filled double-glazing unit with different thermophysical parameters of PCM. Sol Energy 2016;133:207–20. [6] Hussein AK. Applications of nanotechnology to improve the performance of solar collectors–Recent advances and overview. Renew Sust Energ Rev 2016;62:767–92. [7] Hussein AK, Li D, Kolsi L, Kata S, Sahoo B. A review of nanofluidrole to improve the performance of the heat pipe solar collectors. Energy Procedia 2017;109:417–24. [8] Sokhansefat T, Kasaeian AB, Kowsary F. Heat transfer enhancement in parabolic trough collector tube using Al2O3/ synthetic oil nanofluid. Ren Sust Energ Rev 2014;33:636– 44. [9] Risi A, Milanese M, Laforgia D. Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids. Ren Energ 2013;58:134–9. [10] Moghari RM, Akbarinia A, Shariat M, Talebi F, Laur R. Two-phase mixed convection Al2O3 /water nanofluid flow in an annulus. Int J Multipath Flow 2011;37:585–95. [11] Sarkar J, Ghosh P, Adil A. A review on hybrid nanofluids: recent research, development, and applications. Renew Sust Energ Rev 2015;43:164–77. [12] Madhesh D, Parameshwaran R, Kalaiselvam S. Experimental investigation on convective heat transfer and rheological characteristics of Cu-TiO2 hybrid nanofluids. Exp Therm Fluid Sci 2014;52:104–15. [13] Otanicar TP, Phelan PE, Prasher RS, Rosengarten G, Taylor RA. Nanofluid-based direct absorption solar collector. J Renew Sust Energ 2010;2:033102. [14] Benabderrahmane A, Aminallah M, Laouedj S, Benazza A, Solano JP. Heat transfer enhancement in a parabolic trough solar receiver using longitudinal fins and nanofluids. J Therm Sci 2016;25:410–7. [15] Mwesigye A, Meyer JP. Optimal thermal and thermodynamic performance of a solar parabolic trough receiver with different nanofluids and at different concentration ratios. Appl Energy 2017;193:393–413.