For an indoor environment, with the RSS based distance estimation methods, the short range distances between the nodes can be estimated by using the Received Signal Strength Indicator (RSSI) measurements taken over a standard wireless communication infrastructure, namely Wi-Fi.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In recent years, indoor localization problem is a highly preferred topic to study.
📊
Key Findings & Data:In order to estimate the relative positions of the communication nodes in a localization system, the distance information of each node is required.
💡
Conclusion & Impact:For an indoor environment, with the RSS based distance estimation methods, the short range distances between the nodes can be estimated by using the Received Signal Strength Indicator (RSSI) measurements taken over a standard wireless communication infrastructure, namely Wi-Fi.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Indoor distance estimation · RSSI
Abstract
In recent years, indoor localization problem is a highly preferred topic to study. In order to estimate the relative positions of the communication nodes in a localization system, the distance information of each node is required. In this paper, it is aimed to estimate the distances between the nodes by using the received signal strength (RSS) measurements. For an indoor environment, with the RSS based distance estimation methods, the short range distances between the nodes can be estimated by using the Received Signal Strength Indicator (RSSI) measurements taken over a standard wireless communication infrastructure, namely Wi-Fi.
TÜRKORAL, T., TAMER, Ö., YETİŞ, S., İNANÇ, E., ÇETİN, L. (2017). Short Range Indoor Distance Estimation by Using RSSI Metric. Electrica, Cilt: 17 Sayı: 2, 3295–3302. https://ajindex.com/articles/1015571
Güvenç, I., & Chong, C. C. (2009). A survey on TOA based wireless localization and NLOS mitigation techniques. IEEE Communications Surveys and Tutorials, 11(3), 107–124. Doǧançay, K. (2005). Emitter localization using clustering-based bearing association. IEEE Transactions on Aerospace and Electronic Systems, 41(2), 525–536.
Arslan, H., Chen, Z. N., & Di Benedetto, M.-G. (Eds.). (2006). Ultra wideband wireless communication. New Jersey. John Wiley & Sons. Laaraiedh, M., Yu, L., Avrillon, S., & Uguen, B. (2011). Comparison of hybrid localization schemes using RSSI, TOA and TDOA. European Wireless, 2011, 626–630.
Hara, S., & Anzai, D. (2008). Experimental Performance Comparison of RSSI- and TDOA-Based Location Estimation Methods. VTC Spring 2008 - IEEE Vehicular Technology Conference, 0, 2651–2655.
Türkoral, T., Tamer, Ö., Yetiş, S., İnanç, E., & Çetin, L. (2016). Alınan işaret güç göstergesi (RSSI) metriği kullanılarak kapalı alan mesafe kestirimi. (yayınlanmamış) Elektrik-Elektronik ve Biyomedikal Mühendisliği Konferansı, 2016.
Xiao, J., Liu, Z., Yang, Y., Liu, D., & Xu, H. (2011). Comparison and analysis of indoor wireless positioning techniques. 2011 International Conference on Computer Science and Service System, CSSS 2011 - Proceedings, 293–296.
Chrysikos, T., Georgopoulos, G., & Kotsopoulos, S. (2009). Site-specific validation of ITU indoor path loss model at 2.4 GHz. 2009 IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks and Workshops, WOWMOM 2009.
Lassabe, F., Canalda, P., Chatonnay, P., Spies, F., & Baala, O. (2005). A Friis-based calibrated model for WiFi terminals positioning. Proceedings - 6th IEEE International Symposium on a World of Wireless Mobile and Multimedia Networks, WoWMoM 2005, 382–387.
Sommer, C., & Dressler, F. (2011). Using the right two-ray model? A Measurement based evaluation of PHY models in VANETs. Proceeding ACM MobiCom, (3), 1–3. International Telecommunication Union. (2015). Retrieved January 10, 2017, from https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.1238-8-201507-I!!PDF-E.pdf