Journals / Yapı Teknolojileri Elektronik Dergisi / 2011 / Cilt: 7 Sayı: 1

Strength and Sulfate Resistance of Mortars Produced with Pumice, Barite, Colemanite and Blast Furnace Slag

Pomza, Barit, Kolemanit ve Yüksek Fırın Cürufu Katkılı Harçların Dayanımı ve Sülfat Direnci

Pages
39–51
Publication Date
2016-06-22
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results were discussed to reference sample and to each other.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, strength and the durability properties of basaltic pumice, barite, colemanite and blended blast furnace slag included mortars were investigated.
📊
Key Findings & Data:Physical and mechanical properties of additive type and amount were investigated. 7, 28 and 180-day compressive and bending strength and 180 and 360-day sulfate resistance of mortars were investigated.
💡
Conclusion & Impact:Results were discussed to reference sample and to each other.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, strength and the durability properties of basaltic pumice, barite, colemanite and blended blast furnace slag included mortars were investigated. Pumice, barite, colemanite and blast furnace slag is substituted instead of cement and Rilem-Cembureau standard sand. Physical and mechanical properties of additive type and amount were investigated. 7, 28 and 180-day compressive and bending strength and 180 and 360-day sulfate resistance of mortars were investigated. Results were discussed to reference sample and to each other.

Özet

Bu çalışmada; bazaltik pomza, barit, kolemanit ve yüksek fırın cürufu içeren harçların mekanik dayanımı ve sülfat dayanıklılığı incelenmiştir. Çimento ve Rilem-Cembureau standart kumu yerine çeşitli oranlarda pomza, barit, kolemanit ve yüksek fırın cürufu kullanılmıştır. Katkı miktarı ve çeşidinin harçlara mekanik, fiziksel ve kimyasal etkileri araştırılmıştır. Harç numunelerinin 7, 28 ve 180 günlük basınç ve eğilme dayanımları ile 180 ve 360 günlük sülfat direnci araştırılmıştır. Sonuçlar referans numunesine ve katkı çeşidine göre yorumlanmıştır.

🔖

Cite This Article

BİNİCİ, H., SEVİNÇ, A. H., DURGUN, M. Y. (2016). Strength and Sulfate Resistance of Mortars Produced with Pumice, Barite, Colemanite and Blast Furnace Slag. Yapı Teknolojileri Elektronik Dergisi, Cilt: 7 Sayı: 1, 39–51. https://ajindex.com/articles/1014788

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...