Journals / TOJSAT / 2011 / Cilt: 1 Sayı: 3 - Cilt: 1 Sayı: 3

MACHINABILITY OF MAGNESIUM AND ITS ALLOYS

Journal
TOJSAT
Pages
31–38
Publication Date
2016-07-23
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Another emerging area of Mg and its alloys are biomedical applications as biodegradable materials which may lead them to become next-generation materials

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Magnesium and magnesium alloys are used in a wide variety of structural applications including portable microelectronics and telecommunication, automotive, materials-handling and aerospace industries due to their low density.
📊
Key Findings & Data:CO2, SOX and NOX emissions) and energy consumption.
💡
Conclusion & Impact:Another emerging area of Mg and its alloys are biomedical applications as biodegradable materials which may lead them to become next-generation materials
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Machinability · Magnesium · Magnesium Alloys

Abstract

Magnesium and magnesium alloys are used in a wide variety of structural applications including portable microelectronics and telecommunication, automotive, materials-handling and aerospace industries due to their low density. The utilization of magnesium alloys as automotive components is remarkably effective to reduce vehicle weight leading to both reduced discharge of air pollutants (i.e. CO2, SOX and NOX emissions) and energy consumption. Another emerging area of Mg and its alloys are biomedical applications as biodegradable materials which may lead them to become next-generation materials

🔖

Cite This Article

AKYUZ, B. (2016). MACHINABILITY OF MAGNESIUM AND ITS ALLOYS. TOJSAT, Cilt: 1 Sayı: 3 - Cilt: 1 Sayı: 3, 31–38. https://ajindex.com/articles/1008805

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. B. Denkana, F.Witte, C.Podolsky and A.Lucas: Degradable Implants made of Magnesium Alloys, Proc.5Th. Euspen International Conferance-Montpiller, France, May 2005
  2. B. Denkena, J. C. Becker, C. Podolsky, and A. Kuhlmann: Safe Machining of Magnesium Parts by Cutting and Burnishing Operations, (Edited by K.U. Kainer), Magnesium Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Wiley-VCH, Germany, 2004
  3. B. L. Mordike and T. Ebert: Magnesium – applications – potential, Journal of Material Science Engineering A 302, pp. 37-45, 2001
  4. E. Gariboldi: Drilling a magnesium alloy using PVD coated twist drills, Journal of Materials Processing Technology 134, p.287-295, 2003
  5. F. Tikal, M. Schmier and C. Vollmer: High-speed-drilling in AZ91 D without Lubri-coolants, (Edited by Mordike and Kainer), Manesium Alloys and their Applications, WILEY-VCH Verlag GmbH, Weinheim, Germany, 2000
  6. F.Z. Fang, L.C. Lee and X.D. Liu: Mean flank temperature measurement in high speed dry cutting of magnesium alloy, Journal of Materials Processing Technology 167,119–123, 2005
  7. G. Hanko, C. Lochbichler, W. Riederer and G. Macher: Techniques for Recycling of Magnesium Scrap, (Edited by K.U. Kainer), Magnesium Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Wiley-VCH, Germany, 2004
  8. H.E. Friedrich and B.L.Mordike: Magnesium Technology, Springer-Verlag Berlin Heidelberg, Germany, 2006
  9. H.K.Tönsoff and J.Winkler: The Influence of Tool Cutting in Machining of Magnesium, Surface and coating Technology,94-95, p.610-616, 1997
  10. J. F. King: Development of Practical High Temperature Magnesium Casting Alloys, Magnesium Alloys and their Applications. (Edited by B.L.Mordike and K. U. Kainer),WILEY-VCH, Weinheim, Germany, p.14-22, 2000
  11. J. Hou, W. Zhou and N. Zhao: Methods for Prevention of Ignition during Machining of Magnesium Alloys, Key Engineering Materials Vols. 447-448,pp 150-154, 2010
  12. M. Arai, S. Sato, M. Ogawa and H.I Shikata: Chip Control in Finish Cutting of Magnesium Alloy, Journal of Materials Processing Technology 62, 341–344, 1996
  13. M. H.Ruzi, M.Norhamidi, S.Abu Bakar, R.J.Khairur, M.N.Nor Hafiez, A.Sufizar and I.I.Mohd Halim Murtadhahadi: A Review Of Workability Of Wrought Magnesium Alloys, Advanced Manufacturing Research Group’09 Seminar 3, Advanced Manufacturing Research Group, 2009
  14. M. Jönsson and D. Persson: “The influence of the microstructure on the atmospher